Hardware manual - MACCON GmbH

Kollmorgen 06/2012 General1.5 Symbols usedSymbolIndicationIndicates a hazardous situation which, if not avoided, will result indeath or serious injury.Indicates a hazardous situation which, if not avoided, could result indeath or serious injury.Indicates a hazardous situation which, if not avoided, could result inminor or moderate injury.Indicates situations which, if not avoided, could result in property damage.This is not a safety symbol.This symbol indicates important notes.1.6 Standards usedStandard ContentISO 4762 Hexagon socket head cap screwsISO 11898 Road vehicles — Controller area network (CAN)ISO 13849Safety of machinery: Safety-related parts of control systems(former EN 954)ISO 12100 Safety of machinery: Basic concepts, general principles for designIEC 60085 Electrical insulation - Thermal evaluation and designation MaintenanceIEC 60204 Safety of Machinery: Electrical equipment of machineryIEC 60364 Low-voltage electrical installationsIEC 60439 Low-Voltage Switchgear and Controlgear AssembliesIEC 60529 Protection categories by housing (IP Code)IEC 60664 Insulation coordination for equipment within low-voltage systemsIEC 60721 Classification of environmental conditionsIEC 61000 Electromagnetic compatibility (EMC)IEC 61131 Programmable controllersIEC 61491Electrical equipment of industrial machines – Serial data link forreal-time communications between controls and drives.IEC 61508Functional safety of electrical/electronic/programmable electronicsafety-related systemsIEC 61800 Adjustable speed electrical power drive systemsIEC 62061Functional safety of electrical/electronic/programmable electronicsafety-related systemsIEC 62079 Preparation of instructions - Structuring, content and presentationANSI Z535 Product safety (symbols, colors, information)UL 840UL Standard for Safety for Insulation Coordination Including Clearancesand Creepage Distances for Electrical EquipmentUL 508C UL Standard for Safety Power Conversion EquipmentANSI American National Standard Institute, Inc.IEC International Electrotechnical CommissionISO International Organization for StandardizationUL Underwriters LaboratoriesS701x2-S724x2 Instructions Manual 11