Datatrac 400 Operations Manual - Aeroflex

Aeroflex Operation ManualXMT - Make transmit window the active window. If the transmit channel is enabled and is beingdisplayed on the real time screen, this keystroke will move the active window indicator to the transmitwindow. Any subsequent keystrokes will affect the transmit window. The receive channels willcontinue displaying real time data. Control is passed back to the receive channel window by pressingRCV. If no transmit channel is present in the real time screen, control is passed to the transmit setupscreen and any RS-232C download is terminated.RCD, BRK - Record, Break functions. These keystrokes will cause control to pass out of the real timescreen and to the respective setup screen. Any current RS-232 download is terminated. Theoperator can return to the real time screen by pressing RCV or XMT and then ENT.> - Help menu. The help key calls up the help screen for the real time receive display as shownbelow:* RECEIVER HELP SCREEN *Symbol at header indicatescurrent active channel.* KEY DEFINITIONS *1,2,3,4 Change the active RCV channel.^, v Scrolls data in active channel.> Steps through data formats inactive channel.ENT Holds (freezes) data in activechannel. Toggle to release.CLR Clears receive buffer of activechannel.Press ENT to continueDATATRAC 400 – REV 0 – PAGE 3-25