DTS ScrewMaster Range - Crane Electronics

ScrMstrRange_Brochure_IQW2Brochure 23/10/2012 15:03 Page 1DTS ScrewMaster RangeDigital torque screwdrivers and wrenchesDTS ScrewMaster - Transducerised screwdriver withintegrated displayKEY FEATURES4 Point of load insensitive4 1/4” hex female driveThe DTS ScrewMaster is a simple to use, point of load insensitive, tranducerised screwdriver with an integrated digital display.It features two measurement modes for displaying either peak or real time torque. Upper and Lower Limits can be set in peakmode enabling an audible signal and an LED to indicate HI, OK or LO fastener status.For traceability up to 100 date and time stamped readings are stored and can be downloaded to a printer or a PC for archivingor further processing of data.UTA and IS ScrewMaster - Simple transducerisedscrewdriver for use with an external displayKEY FEATURES4 Point of load insensitive4 Measures torque applied during fastening operation or inspectionovercheck (move on) in conjunction with TorqueStar Opta4 Auto ID with Crane readouts (UTA only)The UTA/IS ScrewMaster is a simple transducerised screwdriver used in conjunction with an external readout/data collector. Itmeasures the torque applied directly to the fastener during the assembly operation or inspection overcheck, communicating thedata to a suitable readout for immediate verification and subsequent data collection.The Industry Standard (IS) version offers the features of the ScrewMaster but allows the user to connect to a readout devicefrom another manufacturer.The transducer element of both the DTS and UTA/IS ScrewMaster is directly in line with the hex drive, thus makingmeasurement completely independent of the point of load.DTS Wrench - Low range torque wrench with anintegrated displayKEY FEATURES4 Point of load insensitive4 Peak or track torque measurement on integrated displayThe DTS Wrench is simple to use, point of load insensitive, torque wrench with an integrated digital display. It features twomeasurement modes for displaying either peak or real time torque. Upper and Lower Limits can be set in peak mode enablingan audible signal and an LED to indicate HI, OK or LO fastener status.For traceability up to 100 date and time stamped readings are stored and can be downloaded to a printer or a PC for archivingor further processing of data.www.crane-electronics.com

ScrMstrRange_Brochure_IQW2Brochure 23/10/2012 15:03 Page 2DTS ScrewMaster RangeDigital torque screwdrivers and wrenchesDTS ScrewMaster Range Technical SpecificationDTS ScrewMasterUTA/IS ScrewMasterDTS WrenchPhysical measurements Bi-directional torque (clockwise calibration unless 4 4 4otherwise requested)Integrated display Complete system – no need for separate readout 4 4Measurement units Nm, Ncm, kgfcm, kgfm, ozfin, lbfin, lbft 4 4Measurement modes Track – real time torque 4Peak (Auto-reset) – display and capture of highest torquevalue during the cycle; direction determined by thresholdsetting; value overwritten when new cycle started(i.e. threshold torque exceeded)Peak (Manual-reset) – display of highest absolute torquevalue since last manual reset; no discrimination between+ or – torque directionMeasurement parameters Threshold torque; Upper/Lower Specification Limits (USL 4 4can be up to 110% of nominal rating)Cycle status indication Tri-colour LED indicating HI/OK/LO torque status 4 4Data storage 100 reading non-volatile memory of torque value only 4 4Print modes & PC compatibility Single reading or page mode with header including serial 4 4number and recalibration date via RS232Interchangeable attachments Equipped with a 1⁄4” female hexagonal drive – compatible 4with a wide range of tool adaptersConstruction Point of load insensitive – transducer element in line with 4 4socket driveAluminium bodyShaft material: stainless steelOverload capacity: 125% rated torque1⁄4” female hexagonal driveCalibration Issued with calibration certificate traceable to National and 4 4 4International StandardsIS transducers are normalised calibration unless indicatedin tableStandard Crane calibration: 10 points; single direction(clockwise unless otherwise requested)10% to 100% of nominal torqueBi-direction Crane calibration: 10 points; each direction;from 10% to 100% of nominal torqueUKAS calibration: calibration to ISO 26789Recalibration is recommended every 12 monthsZero stability < ± 0.1% FSD/°C 4 4 4Static accuracy ± 0.5% FSD (Full Scale Deflection) 4 4 4www.crane-electronics.com

ScrMstrRange_Brochure_IQW2Brochure 23/10/2012 15:03 Page 3DTS ScrewMaster RangeDigital torque screwdrivers and wrenchesDTS ScrewMaster Range Technical Specification (cont.)DTS ScrewMasterUTA/IS ScrewMasterDTS WrenchOperating environment Temperature: 5 – 40°C 4 4 4Humidity: 10 – 75% non-condensingIngress protection rating: IP40 (indoor use)Warranty 12 months parts and labour against faulty workmanship or 4 4 4materialsTransducer types IS: ‘Industry Standard’ version; bridge resistance: 350 Ohms; 4sensitivity: see table belowUTA: ‘High Output’ version; bridge resistance: 350 Ohms;output: 2.5v FSDExcitation voltage: 5VConnections HO version: 1m integral cable with strain relief; 25-pin ‘D’ 4port (male) for connection to Crane’s UTA system readoutsIS version: output connector to MIL-C 26482 / BS 9522FOO 17; shell size 8-4PDisplay 31⁄2 digit LCD display; 10mm characters; incorporating 4 4additional mode and status symbolsKeypad Membrane keypad with 6 function keys 4 4Auto zero Auto zero on power-up; display indication of excessive 4 4zero offsetPower Standard Alkaline Manganese (supplied) type ‘C’ cells; 4 4100 hours usagePower management User selectable auto power off: 1, 2, 5, 10 minutes 4 4Input/output ports Serial output: RS232C; user programmable baud rates 4 4and protocolsAnalogue output: ±1V dc at rated torque.Printer compatibility RS232 output baud rate: 300; 600; 1200; 2400; 4800; 4 49600; Stop bits: 1; 2; Parity: odd; even;NoneProduct CodesDTS ScrewMasterSIZE CODE1 Nm DTS-485-0-02 Nm DTS-485-01CR-2-05 Nm DTS-486-0-0UTA ScrewMasterSIZE CODE1 Nm UTA-481-0-1-40-02 Nm UTA-481-0-405 Nm UTA-482-0-40DTS WrenchSIZECODE5 Nm DS-440-01CR-5-010 Nm DS-440-02CR-10-025 Nm DS-440-03CR-25-0IS ScrewMasterSIZECODE2 Nm IS-483-0-15 Nm IS-484-0-1www.crane-electronics.com

ScrMstrRange_Brochure_IQW2Brochure 23/10/2012 15:03 Page 4OMS4 Single database tostore torqueinformation from alldepartments4 All data completelytraceable and securetJRS Opta4 A joint simulatorusing a threadedfastener and nut4 Fully automatic quickrelease of fastenerIQWrench2 Opta4 Point of loadinsensitive4 Interchangeablehead attachmentswith auto ID andcalibrationTorqueStar Opta4 Torque or forceindicator and datacollector4 Simple readout tocomprehensive audittoolCheckStar4 In line transducerwith optional anglemeasurement4 Accuracy +/– 0.25%of full scaleService Centres4 Centres throughoutthe world4 Fully traceablecalibration and repairserviceCrane Electronics LtdWatling DriveSketchley MeadowsHinckley LE10 3EYUnited Kingdom+44 (0)1455 25 14 88+44 (0)1455 61 47 17sales@crane-electronics.comwww.crane-electronics.comThe force in torque managementCrane Electronics Inc1260 11 th Street WestMilanIllinois 61264USA+1 309-787-1263+1 309-787-2099salesusa@crane-electronics.comwww.crane-electronics.comSMST/UK/12/01www.crane-electronics.com