Domestic Bulk Mail Envelope Layout Standards - New Zealand Post

Front of E8 – measurements(diagram shown at 100%) Length = 152mm Height = 90mmThis example shows the clear zones for a E8 window envelope. If you are printing the delivery address directlyonto the envelope only one 8mm clear zone is only required around the delivery address itself.Max 34mm5-10mm32.5mm27.5mmPO Box 12345, Wellington Mail Centre, Wellington 5045Sender address area**10mmNew ZealandPermit No. 12345614mmIndicia area10mm5-10mmMax 64mmObject area(graphics, logo, text)Min 8mm Min 8mmA B SampleMin 8mm123 Sample Envelope StreetSample AddressSampleton 0000Address block(can extendacross the widthof the envelope)Min 8mmObject area(graphics, logo, text)8mm*Sortcode clear zone – can be white and/or an approved Pantone colour but must be clear of logos, graphics and text.15mm* For DLE, Max POP, E8 and some other envelope or window sizes, there may be insufficient space for an 8mm clear zone below the window.In these cases the 8mm clear zone can overlap with the 15mm sortcode clear zone.** For E8 envelopes the maximum sender address area is 34mm height x 64mm length.Got a question or need to approve your envelope design? Please contact us via fp.pp@nzpost.co.nz or on 0800 501 50111