Delay on Operate Type DAA01, PAA01 Timers - Carlo Gavazzi

Timers<strong>Delay</strong> on OperateType DAA01, PAA01• Time range 0.1 s to 100 h• Knob selection of time range• Knob adjustable time setting• Automatic start• Repeatability: ≤ 0.2%• Output: 8 A SPDT or 2 x 8 A SPDT relays• For mounting on DIN-rail in accordance with DIN/EN50 022 or Plug-in• 22.5 Euronorm or 36 mm plug-in module housing• Combined AC and DC power supply• LED indication for relay status and power supply ONDAA01PAA01Product DescriptionMulti-voltage delay on operatetimer with 7 selectabletime ranges within 0.1 s andType Selection100 h. For mounting on DINrail(DAA01) or plug-in(PAA01).Ordering KeyHousingFunctionTypeItem numberOutputPower supplyDAA 01 C M24Mounting Output Housing Supply: 24 VDC and 24 to 240 VAC Supply: 24 to 240 VAC/DCDIN-rail 1 x SPDT D-Housing DAA01CM242 x SPDT DAA01DM24Plug-in 1 x SPDT P-Housing PAA01CM242 x SPDT PAA01DM24Time SpecificationsTime rangesKnob selectable0.1 to 1 s1 to 10 s6 to 60 s60 to 600 s0.1 to 1 h1 to 10 h10 to 100 hSetting accuracy ≤ 5%Repeatability ≤ 0.2%Time variationWithin rated power supply ≤ 0.05%/VWithin ambient temperature ≤ 0.2%/°CResetPower supply interruption ≥ 200 msOutput SpecificationsOutput1 or 2 x SPDT relaysRated insulation voltage 250 VAC (rms)Contact Ratings (AgSnO 2) µResistive loads AC 1 8 A @ 250 VACDC 12 5 A @ 24 VDCSmall inductive loads AC 15 2.5 A @ 250 VACDC 13 2.5 A @ 24 VDCMechanical life≥ 30 x 10 6 operationsElectrical life≥ 10 5 operations(at 8 A, 250 V, cos ϕ = 1)Operating frequency < 7200 operations/hDielectric strengthDielectric voltage2 kVAC (rms)Rated impulse withstandvoltage4 kV (1.2/50 µs)Specifications are subject to change without notice (16.10.02) 1Gross Automation (877) 268-3700 · www.carlogavazzisales.com · sales@grossautomation.com

DAA01, PAA01Supply SpecificationsPower supplyOvervoltage cat. IIIRated operational voltage (IEC 60664, IEC 60038)through terminals:(DAA01C) A1, A2 or 24 VDC ± 15% and(PAA01C) 2, 10 24 to 240 VAC + 10% -15%,45 to 65 Hz(DAA01D) A1, A2 or 24 to 240 VAC/DC(PAA01D) 2, 10 + 10% - 15%,45 to 65 HzVoltage interruption≤ 10 msRated operational powerAC supply4 VADC supply1.5 WTime SettingCentre knob:Time setting on relativescale: 1 to 10 with respectto the chosen rangeOperating DiagramLower knob:Setting of time rangeGeneral SpecificationsPower ON delay≤ 100 msReaction timeInstantaneous contact < 20 ms from power ONIndication forPower supply status LED, greenOutput statusLED, yellow(flashing when timing)Environment (EN 60529)Degree of protection IP 20Pollution degree3 (DAA01), 2 (PAA01)(IEC 60664)Operating temperature -20° to +60°C, R.H. < 95%Storage temperature -30° to +80°C, R.H. < 95%WeightApprox. 130 gScrew terminals (DAA01)Tightening torqueMax. 0.5 Nm according toIEC EN 60947UL, CSAYesApprovalsCE markingEMCElectromagnetic CompatibillityImmunity According to EN 61000-6-2Emission According to EN 50081-1Timer Specifications According to EN 61812-1Mode of OperationPower supplyRelay 1ONOFFRelay 2 ON(<strong>Delay</strong>ed)OFFRelay 2 ON(Istantaneous)OFFTTThe yellow LED, flashingwhen timing, is ON as soonas the relay turns ON.The second relay can operateas instantaneous ordelayed changeover contact.The selection is made by aDIP-switch placed under theplastic door on the device’sfront.is connected. At the end ofthe set delay the relay operatesand does not releaseuntil the power supply isinterrupted for at least 200ms. If the power supply isinterrupted for at least 200ms before the relay operatesthe time is set to zero andthe circuit is ready for a newtime period.LEDThe set delay period beginsas soon as the power supplyWiring DiagramsDAA01PAA01L(+)L(+)A116 18 26 2824 3 8 9A215 25101 11N(-)DAA01C...DAA01D...DAA01D...N(-)PAA01C...PAA01D...PAA01D...2 Specifications are subject to change without notice (16.10.02)Gross Automation (877) 268-3700 · www.carlogavazzisales.com · sales@grossautomation.com