Product Specification - Fortec AG

More documents

Recommendations

Info

Product SpecificationAU OPTRONICS CORPORATIONG121SN01 V36.5 Interface Timing6.5.1 Timing CharacteristicsDE only modeParameter Symbol Min. Typ. Max. Unit ConditionClock frequency 1/ T Clock 33.6 39.8 48.3 MHzVerticalSectionHorizontalSectionPeriod T V 608 628 650Active T VD 600 600 600Blanking T VB 8 28 50Period T H 920 1056 1240Active T HD 800 800 800Blanking T HB 120 256 440T LineT ClockNote1: Frame rate is 60 Hz.Note2: Typical value refer to VESA Standard6.5.2 Input Timing DiagramG121SN01 V3 rev.1.119/27PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com
Product SpecificationAU OPTRONICS CORPORATIONG121SN01 V36.6 Power ON/OFF SequenceVDD power and lamp on/off sequence is as below. Interface signals are also shown in the chart. Signals from anysystem shall be Hi-Z state or low level when VDD is off.Power SupplyVDD90 %90 %0V10 %T1 T2 T3 T410 %T7Interface Singal0V10 % 10 %T5T6Backlight ON0V10 %10 %Power ON/OFF sequence timingParameterValueMin. Typ. Max.UnitsT1 0.5 - 10 msT2 0 - 50 msT3 0 - 50 msT4 0 - 10 msT5 200 - msT6 200 - msT7 500 - - MsThe above on/off sequence should be applied to avoid abnormal function in the display. Please make sure toturn off the power when you plug the cable into the input connector or pull the cable out of the connector.G121SN01 V3 rev.1.120/27PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com
Page 1 and 2: Produktspezifikation für AUO G121S
Page 3 and 4: Product SpecificationAU OPTRONICS C
Page 19: Product SpecificationAU OPTRONICS C

Product Specification - Fortec AG

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?