Baxi Biomass boilers - Ecobuild

Baxi Multi-Heat incorporates the following features:Thermostatic ControlThe control unit regulates the flow of fuel and combustion air to maintain maximumefficiency. The controller also enables the Installer/user to set the boiler temperature.The main upper door houses the main heat exchanger with the integral fluebaffles which assist in transferring the heat to the hot water supply.The combustion chamber for ignition, cleaning and ash removal is locatedbehind the lower door.Insulated DoorsThe auger motor rotates the auger which in turn feeds fuel precisely intothe combustion chamber at the rate required for the full, reduced orslumber outputs.Auger MotorFluesBaxi Multi-Heat is recommended for use with Class 1 insulated flues.Strong winds or a very high chimney can cause excessive flue draft. A draft stabiliser must be fitted to enable theflue draft to be controlled and set to the recommended 10-25 pascals.