Test Program Manual - Sensis

More documents

Recommendations

Info

DOC NO MODEL NAME REV. PAGEPL-VCDM0000-006 VCDM Test Program Manual 0.1 6 of 183.2 DISPENSE3.2.1 DISPENSE1) Put the request number for dispensing onto each blank for one transaction and thenumber of the repetition for testing. Then, press the button of “DISPENSE” and VCDMwill start to dispense as requested from the cash cassette.2) Without repetition number, ECDM is operated just one time. The waiting time can beset by one second. If the error is occurred during operation, the dialog window isdisplayed. (Error code is referred to the interface specification.)(210mm × 297mm)
DOC NO MODEL NAME REV. PAGEPL-VCDM0000-006 VCDM Test Program Manual 0.1 7 of 18The following picture shows the results after DISPENSE command.In the column under “Dispensed”, the red line shows the number of the latestdispensed notes and the blue line shows the accumulated number of total dispensednotes for all repetition.In the column under “Rejected”, the red line shows the number of the latest rejectednotes and the blue line shows the accumulated number of total rejected notes for allrepetition.In the row of “Total”, the number of the dispensed and the rejected from all thecassette are shown.(210mm × 297mm)
Page 2: DOC NO MODEL NAME REV. PAGEPL-VCDM0
Page 10 and 11: DOC NO MODEL NAME REV. PAGEPL-VCDM0

Test Program Manual - Sensis

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?