Thermal Shock Chambers - MB Electronique

CHAMBER AND UTILITY REQUIREMENTSEL type ES type EH typeModel42EL−A 72EL−A 102EL−A 202EL−W 302EL−W 72ES−A 72ES−W 102ES−W 202ES−W 72EH−WAir-cooled Water-cooled Air-cooled Water-cooled Water-cooled200 VAC 49 A 70 A 70 A 110 A 120 A 78 A 120 A 112 APower supply220 VAC 47 A 70 A 70 A 110 A 120 A 75 A 120 A 108 A380/400/415 VAC 27 A 45 A 45 A 65 A 70 A 50 A 70 A 60 AAir 0.4 to 0.7 MPa (4 to 7 kgf/cm 2 )50 Hz — 95700 — 59700 95700 95700Condensation60 Hz — 96100 — 64800 104600 96100Cooling water supplyrate (at reference— 4.6 m 3 /h — 3.1 m 3 /h 4.6 m 3 /hwater temp.+32°C) *1*2Water pressure —0.2 to 0.5 MPa(2 to 5 kgf/cm 2 )—0.2 to 0.5 MPa(2 to 5 kgf/cm 2 )Piping connection size32 AOutside dimensionsmm (inch)W 1140H 1900D 1270W 1310H 1900D 1470W 1550H 1900D 1470W 1550H 1900D 1770W 1870H 1900D 1770W 1310H 1900D 1470W 1550H 1900D 1470W 1550H 1900D 1770W 1310H 1900D 1770*1 Maximum possible value during temperature recovery.*2 Rate depends on the cleanliness of the heat exchanger.9