Thermal Shock Chambers - MB Electronique

More documents

Recommendations

Info

OPTIONSAutomatic doorAutomatic sliding door (vertical) operatedby single-touch button. Equipped with 2safety mechanisms: a photoelectric sensor,and a touch sensor. A door stop switch isalso set.* If you also need the emergency stopswitch, please contact us.Specimen basket/shelf bracketsEquivalent to standard accessory.· Material: stainless steel (5 mesh)Heavy-duty shelfUse to hold heavy specimens exceedingthe load capacity of the standard specimenbasket.· Load capacity: 30 kgPower cable5 m, 10 m* The chamber does not come with apower cable.Chamber dew trayAdditional cable portProvided in addition / replacement of thestandard cable port (left side)· φ50 mm roundPrevents water leaks from the chamberonto the floor.* The use of casters is recommended tofacilitate operation.Anchoring fixturesUsed to bolt the chamber to the floor.Interface· Computer interface: GPIB· Serial interface: RS–232C* Select one, instead of standard RS–485Flat cable portProvided in addition / replacement of thestandard cable port (left side).· 25 x 100 mm slotCable port rubber plugPrevents air leakage from the cable port.· φ50 mm for round port· For flat cablesCommunication cable· RS-485 cable: 5, 10 m· GPIB: 2, 4 m· RS-232C: 1.5, 3, 5 mPlug socketTo supply power to external equipment· 2 plug sockets· Rated capacity 100 VAC 3 A(Total capacity)Caster19Installed for mobility.· 6 casters (4 for TSA–42EL)· 4 levelling feet
Thermal Shock Chamber SeriesAir to Air Thermal Shock Chamber TSEA compact thermal shock chamber to handle thermalshock testing on small and limited volume specimens. Itsupports standardized testing with no auxiliary coolingand a two-zone (+150°C and –65°C) upstream airtemperature recovery time within 5 minutes. The TSEmodel provides the same performance as ESPEC’s largethermal shock chambers in a compact design.Model Temp. range Inside dimensions (mm)TSE–11High temp. side:+60 to +200°CLow temp. side:–65 to 0°CW320 x H148 x D230Air to Air Thermal Shock Chamber TSDA two-zone thermal shock chamber that complies withJapanese and global test standards such as MIL-STD-883and JIS C 0025.The TSD model can perform accurate testing by monitoringthe specimen temperature and starting the exposure timecount once it has reached the preset temperature or it canimmediately proceed to the next step in the sequence. Thetemperature recovery time between +150°C and –60°Cis just 15 minutes, which reduces the total test duration.Model Temp. range Inside dimensions (mm)TSD–100High temp. side:+60 to +200°CLow temp. side:–65 to 0°CW710 x H345 x D410Liquid to Liquid Thermal Shock Chamber TSBThe liquid to liquid thermal shock chamber is designed toapply higher stress to specimens.It has also greatly reduced required minimum installationspace. The highly airtight test areas and numerous newmechanisms reduce brine consumption, thus greatlyreducing running costs.It features easy operation thanks to the color LCDinteractive touch-screen system.ModelTSB–21TSB–51Temp. rangeHigh temp. chamber:+70 to +200°CLow temp. chamber:–65 to 0°CSpecimen basketdimensions (mm)W120 x H150 x D120W150 x H150 x D20020
Page 1 and 2: Air to AirThermal Shock ChambersTSA
Page 3 and 4: TSA-202TSA-302* Equipped with optio
Page 5 and 6: CharacteristicsFurther reductions i
Page 7 and 8: CharacteristicsImproved reliability
Page 9 and 10: TEST STANDARD AND COMPATIBLE MODELS
Page 11 and 12: EL TypeModel TSA-42EL-A TSA-72EL-A
Page 13 and 14: EH TypeModelSystemPerformance *1Col
Page 15 and 16: DIMENSIONSTSA−72EL · 72ES(Unit:
Page 17 and 18: OPTIONSSpecimen temperature control
Page 19: OPTIONSAmbient-temperature exposure
Page 24: http://www.espec.co.jp/englishHead

Thermal Shock Chambers - MB Electronique

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?