Selection guide 2.qxd

12mmDiameter18mmDiameterCAPACITIVEPROXIMITY SENSORSCYLINDRICAL AND SURFACE MOUNTSensing Range (Sn)Adjustable Sensitivity1 - 4mmYesPAGE1 - 8mmYesPAGENAMUR (Intrinsically Safe)29303-Wire DC34354-Wire DC——2-Wire AC——Electrical ConnectionCabledCabledCapacitive SensorsP+F capacitive sensors are designedfor reliable detection of liquid,powdered or granular media. Theycan detect materials through glassor plastic walls, and many modelsoffer adjustable sensitivity.Ultra-slim Capacitive SensorsF46 ultra-slim capacitive sensorsfeature both surface-mount and tiewrap mounting options. They areideally suited for "point" levelcontrol in flat-walled vessels andflow/no flow indication in plastictubing. F46A versions with PVDFhousings withstand corrosive media.S4See pages:29-31 for NAMUR Models34-39 for DC Models40, 41 for AC ModelsSee pages:30 for NAMUR Models34-36 for DC Models

30mmDiameter40mmDiameter50mmDiameterLimit SwitchFPF461-20mm1 - 30mm1 - 30mm1 - 30mm5 - 50mm2, 5 and 10mmYesYesYesYesYesNoPAGEPAGEPAGEPAGEPAGEPAGE30, 3131——313036—36——34, 3538———38—4040—4141—Cabled,MicroTerminal ConnectionCabledMini,Micro,Terminal ConnectionMini,Micro,Terminal ConnectionCabledAccessories and ComponentsP+F offers numerous brackets,adapters and mounting aids tosimplify sensor installation andmaintenance. Many bracketsoffer impact protection, greatlyextending the sensor's life-span.Cordsets and Junction BlocksP+F offers a complete line of Nano,Micro and Mini style cordsets, aswell as multi-port junction blocksand extension cables. A widevariety of jacket materials survivehazards such as aggressivechemicals, weld slag and oils.Anti-vibration coupling nuts andO-ring seals guarantee a lifetimeof liquid-tight operation.See pages 829-835 See pages 769-828S5

3mmDiameter4mmDiameter4.5mmDiameter5mmDiameterINDUCTIVEPROXIMITYSENSORSCYLINDRICALSensing Range (Shielded)Sensing Range (Unshielded)NAMUR (Intrinsically Safe)2-Wire DCStandard Series0.6mm—0.8mm—0.8mm—0.8mm—PAGE PAGE PAGE PAGE——4545————————————3-Wire DC7474—75Standard Series———75SERIES————————4-Wire DC————Standard Series————SERIES2-Wire ACStandard Series————————————2-Wire AC/DC————Standard Series————SERIES————————Electrical Connection Cabled Cabled Cabled CabledSubminiature DC Inductive SensorsP+F features an expansive selection ofsubminiature, self-contained inductivesensors. Cylindrical versions areavailable in diameters as small as3mm, while surface-mount types haveprofiles as low as 4mm.Basic Series Inductive SensorsAvailable in 2, 3 and 4-wireDC, as well as 2-wire ACstyles, P+F "Basic Series"inductive sensors providethe ultimate combination ofaccuracy, durability andcost-effectiveness.S6See pages:74-89 for Cylindrical75-94 for Surface mountSee pages:64-70 for 2-wire DC74-110 for 3-wire DC113-121 for 4-wire DC124-137 for 2-wire AC

6.5mmDiameter8mmDiameter11mmDiameter12mmDiameter14mmDiameter18mmDiameter22mmDiameter30mmDiameter1.5mm2, 3mm1.5mm2, 3mm2mm5mm2, 4mm4, 6, 8mm3mm8mm5, 8mm8, 12mm6mm10mm10, 15mm15, 25mmPAGE PAGE PAGE PAGE PAGE PAGE PAGE PAGE45———4664, 6764—47, 50———47-5065, 68, 1596515947, 51———51-5467, 68, 16067, 6816054———55-5770, 7169, 7016176, 77, 81,82, 8776, 8181, 87——————————78-80, 82-85,88, 89, 16278,79, 82-8482, 83, 88, 89162113113—124124—————————————————90-92,95, 96, 16390, 91, 9690, 91, 96163113, 114113, 114—124, 126, 127124, 126, 127125, 127, 131,168, 169—127, 131125, 168, 16989————————————92-94, 96-99,102, 164, 16593, 96-9896, 97, 102164, 165114-116114-116115127,128, 131, 132127,128, 131, 132129, 130, 132136, 170, 172—132, 136129, 130, 170-172—————————————166, 16799, 100, 103, 104103166, 167116, 117116, 117—135-137135-137133, 134, 137173, 175—137133, 134, 173-175Cabled,Nano, MicroCabled,Nano, MicroCabledCabled,Micro, MiniCabledCabled,Micro, MiniCabledCabled,Micro, MiniAC/DC Inductive SensorsP+F's flexible AC/DC inductive productline allows a single sensor to meetmultiple supply requirements. These20-250VAC/DC sensors are offered ina variety of styles, including miniaturesurface mount, limit switch, PileDriver and X-series extended range.X-series Extended Range SensorsP+F X-series offers 25-240%more sensing range thantraditional inductive sensors.The 100+ model product lineis available in 3-wire DC,4-wire DC and AC/DC styles.See pages:127 -142 for X-series125-134 for Pile Driver138-142 for Limit Switch188-189 for Weld Immune See inside back coverS7

APM V3 F1 F29INDUCTIVEPROXIMITYSENSORSSURFACE MOUNTSensing Range (Shielded)Sensing Range (Unshielded)—2, 3mm2mm—2.5mm—4mm4mmPAGE PAGE PAGE PAGENAMUR (Intrinsically Safe)—49——2-Wire DC—66——Standard Series—66——3-Wire DC87869292Standard Series—86—92SERIES————4-Wire DC————Standard Series————SERIES————2-Wire AC————Standard Series————4-Wire AC————2-Wire AC/DC—126127—Standard Series—126——SERIES————Cabled,Electrical Connection Cabled Cabled Cabled“Spade” terminalRing and Slot Inductive SensorsP+F offers ring sensors with through-holediameters ranging from 10mm to 150mm.Typical applications include wire-breakagemonitoring and part-ejection verification.Slot sensors are available in sensingranges from 2 to 30mm.Limit Switch and Flat Pack SensorsLimit switch inductive sensors mountin the identical footprint as traditionalmechanical limit switches. Their sensingranges extend from 15mm to 40mm.Flat pack inductive products offer thelongest available sensing ranges (50mm).Both styles are available in multipleoutput configurations.S8See pages:145-150 for Ring Sensors151-156 for Slot SensorsSee pages:71-72 for 2-wire DC, 106-111 for 3-wire DC118-122 for 4-wire DC, 138-144 for 2-wire AC139-142 for 4-wire AC, 140, 142 for AC/DC

921LC 922LC F33M 923H XK F7 F33 F—5mm1.5mm—5mm—15mm——3.2mm—5mm5mm—4, 6mm10mmPAGE PAGE PAGE PAGE PAGE PAGE PAGE PAGE48, 52(Non I.S.)——————53—————————————————81——75, 76, 90949595, 101—————94————————————————115———————115———————————130138——————130—————————————————————————————————————Cabled Cabled CabledMicro, Mini,Terminal connectionCabled Cabled Cabled CabledHazardous Location Inductive SensorsP+F offers the world's most diverseselection of inductive sensorsapproved for hazardous locationinstallation. NAMUR models areintrinsically safe when connectedto an approved P+F intrinsic safetybarrier. Explosion-proof modelsfeature a 100% stainless steelhousing (including sensing face).See pages:45-61 for NAMUR226, 227 for Explosion-proofLong Range Aluminum SensingTraditional proximity sensors incursensing range reductions of 50 to70% when detecting metals such asaluminum and copper. P+F "20/20Series" sensors provide full-distancedetection of nonferrous metals.See pages:125-134 for Pile Driver NFE Series180-183, 229 for 20/20 Series230-233 for standardsurface mountS9

F9 F10 F17 F41INDUCTIVEPROXIMITYSENSORSSURFACE MOUNTSensingRange(Shielded)SensingRange(Unshielded)NAMUR(Intrinsically Safe)2-Wire DC5mm—7mm10mm10mm—1.5mm—PAGE PAGE PAGE PAGE————————Standard Series————3-Wire DC9496, 100, 10110180Standard Series9496, 100, 101—80SERIES————4-Wire DC————Standard Series————SERIES————2-Wire AC————Standard Series————4-Wire AC————2-Wire AC/DC————Standard Series————SERIES————Electrical ConnectionCabled,MicroCabled,MicroCabled,MicroCabled8mm Diameter Pile DriverThe 8mm Pile Driver is the smallestall-metal inductive sensor in theindustry, offering a life span over twentytimes that of conventional plastic-facedsensors. Fully flush mountable,Pile Driver’s 100% stainless steelhousing protects against hazardssuch as lubricants, metal shardsand target impacts.Detect Broken Filling QuillsP+F's NJ60 inductive sensor detectsbroken stainless steel filling quills inplastic or glass bottles. A fraction ofthe price of vision systems, the NJ60also features an 18 bottle/secondscan speed.S10See page 162See pages 234, 235

M1 M1K F11LimitSwitchRhino FP F23———15, 20mm 15, 20mm 40, 50mm—15mm15mm15mm 20, 30, 40mm 30, 40mm50mm100mmPAGE PAGE PAGE PAGE PAGE PAGE PAGE—58—58-60—61——70—71, 72—72————————106105105106, 107, 109, 110107, 109, 110111111——105—107, 109, 110—————107, 109——————118-121119-121122—————119-121—————119, 121—122—138138—139-142184-187143, 144—138138——184-187—————139-142——————140, 142——144——————————140, 142———Micro, MiniMicro,Terminal connectionCabled, MicroMicro, Mini,Terminal connectionMicro,Terminal connectionMicro, Mini,Terminal connectionMicroSAE Cylinder SwitchesSAE series inductive cylinderswitches verify end-of-stroke inhigh-pressure hydraulic cylinders.Utilizing a standard SAE threadedport for mounting, the SAE seriesfeatures a 5000 psi continuousduty pressure rating-the highest inthe industry. Unlike screw-basedcylinder switch designs, the SAEseries offers full 360° rotationalsensor positioning.Analog Feedback Inductive SensorsP+F analog inductive sensors providea 0-20mA signal proportional to eitherthe position, type, or amount of metalpresent. They effectively gauge surfacecontours, hole diameters and camlocation/alignment.See pages 192-197See pages 222, 233S11

PileDriver TMWeldImmuneGripdicator TMCylinderSwitchSPECIALSENSORSCYLINDRICAL ANDSURFACE MOUNTPAGE PAGE PAGE PAGENAMUR (Intrinsically Safe)————2-Wire DC159-161———3-Wire DC162-167180-183191—4-Wire DC—184—192-1972-Wire AC—185-187——4-Wire AC————2-Wire AC/DC168-175188, 189—192-197Relay Output————"Wear-proof"stainless steelsensing faceReliable sensingwithin strongmagneticenvironments.Dual sensor"satellites" forclamp andgripper positionfeedbackEnd-of-strokeverification inhydraulic andpneumaticcylindersFEATURESFull-rangedetection ofnonferrousmetalsSpecialcoatings repelweld slagWeld fieldimmunityOperationalpressure ratingsto 5000 PSI1200 PSIwashdownratingWeld fieldimmunityCylinder Position IndicatorsP+F inductive cylinder positionsensors verify end-of-stroke inhydraulic and pneumatic cylinders.Five standard designs providereliable sensing while maintainingfluid-tight (hydraulic) or air-tight(pneumatic) seals. Standardmodels feature operationalpressure ratings of 250, 1000,3000 and 5000 psi and allmodels are weld field immune.Valve Position SensorsP+F inductive valve position systemsoffer the total package for verifyingopen/closed status of quarter-turnvalves. Five different target "puck"packages ensure 100% compatibilitywith any NAMUR-type positioner.Both intrinsically safe and generalpurpose models are available.S12See pages 192-198See pages 199-209

Valve PositionIndicatorsRelayOutputExtendedTemperatureLinear AnalogOutputExplosionProofMagneticSensorMagneticSensorsPalmButtonsPAGE PAGE PAGE PAGE PAGE PAGE PAGE PAGE199-204—214——248236—205———————206-208—215, 216222, 223—249237, 238———217, 218———————219-221—227———————————209———226————210, 211—————252-256Two sensorsin a singlehousingSwitches loadcurrents upto 6AOperationaltemperatureratings from-40°F to +486°F0 to 20mAanalog currentoutputUL approvedfor use inhazardousareasHigh speedswitching(up to 25 kHz)Capable ofdetectionthroughnonferrousmetalsDesigned forpersonal safetySensor andhigh-visibilitytarget "pucks"mount directlyto actuatorMechanicalshock ratingof 150gCylindrical andsurface mounthousing styles0.003"resolutionSolid statecomponentsDurable,sealedhousingsRugged castaluminumhousingsErgonomic,requiring onlya light touch tooperateSolid stateoutputsWorksthroughheavy glovesMagnetic SeriesErgonomic Safety Palm ButtonP+F offers a wide variety ofmagnetic sensors, includingreed switches and Hall Effectsensors. They can be used fordoor/window monitoring,high-speed detection, liquidlevel sensing, portableequipment applications andcylinder positioningP+F's PB1 palm buttons offer theindustry's best combination ofergonomics and safety. Requiringonly a light touch to actuate, PB1'sdon't contribute to repetitivemotion injuries. When connectedaccording to NFPA and ANSIstandards, they guaranteeoperator-exclusive machine actuation.See pages 236-245See pages 251-256S13

Weld Resistant Pile Driver TMWeld resistant, Black Armorcoated Pile Driver sensorsoutlast traditional weldimmune sensors by a factorof more than 20X. Theirwear-proof stainless steelface is unaffected by repeatedsensor/target contact, whilethe protective Black Armorcoating prevents weld slagaccumulations. 3-wire DCand 2-wire AC/DC modelsare available.Relay Output Proximity SensorsRugged P+F relay outputsensors switch load currentsto 6 Amps. Designed todemanding specificationsof the mobile equipmentindustry, these products alsowithstand mechanical shocksof 150g's and operate reliablyto temperatures of -40ºF.See pages 180, 182, 188See pages 210-211RHINO TM SeriesThe popular Rhino series isnow available in a weldimmune version and in a20/20 version that detects allmetals at equal distances.Rhinos feature a 5-way QuickPivot sensing head that rotateswith just a twist of the hand,and are available in 3- and4-wire DC, and 2-wire AC versions.Sight GlassThis handy mount enables30mm diameter capacitivesensors to be used for levelcontrol applications. Justslide the mount over anyglass or plastic tube with adiameter between 9.5 to 38 mm,and then snug the clamp. Themount makes it easy to adjustthe sensor without disturbingfluid inside the tank.See pages:107-110 for 3-wire DC119-121 for 4-wire DC185-187 for Weld Immune(4-wire DC/ 2-wire AC)See page 832S14

S15

18mmDiameter30mmDiameter30mmDiameter30mmDiameterULTRASONICSENSORSCYLINDRICAL ANDSURFACE MOUNTSensing Range 65 - 300mm 60 - 500mm 130 - 750mm 200mm - 1.8mPAGE PAGE PAGE PAGEAC Switch Point Output————DC Single Switch Point Output—270270270DC Dual Switch Point Output266, 267274274274Analog Voltage288, 289290-293290-293290-293Analog Current288, 289290-295290-295290-295Analog Current and Voltage————DC Thru-Beam————8-Bit Output————Chemically Resistant—303, 304303, 304303, 304Hazardous Area Versions—305, 306——Cylindrical Ultrasonic SensorsOur compact and versatilecylindrical ultrasonic sensorsoffer the range and adjustabilityto suit almost any application.Durable stainless steel housingsand epoxy resin transducersinsure long life. P+F ultrasonicsensors are available in analogand switch point output models.Chemically Resistant Ultrasonic SensorsP+F's chemically resistantultrasonic sensors feature aTeflon coating to protect vitalsensor components fromcorrosive environments. Manyof our most popular ultrasonicsensors are available withchemically resistant transducers.S16See pages 266-277, 288-295See pages 303-304

30mmDiameter30mmDiameter30mmDiameter30mmDiameterLimitSwitchFP FP F64200mm - 2m 500mm - 4m 800mm - 6m70 - 500mm200mm - 2m300mm - 3m 800mm - 6m 200mm - 1m 1.5mPAGE PAGE PAGE PAGE PAGE PAGE PAGE PAGE———264, 265————273271271—————274275275—278-280278-281282, 283—290-293290-293290-293—————290-293290-293290-293—————————296-299296-299——————286, 287——284, 285————300-302300-302——303, 304303, 304304——304——305, 306306——306306305—Ultrasonics for Hazardous LocationsPepperl+Fuchs has developeda complete line of ultrasonicsensors suitable for use inDivision 2 and specific Division 1classified areas. Sensing rangesfrom 2 to 20 feet are available,as well as analog and switchpoint output models.Low Profile Ultrasonic SensorsP+F Low-Profile ultrasonicthru-beam sensors fit where othersensors can't. Their slim 16mmhousings can be positioned almostanywhere, and with a range of upto 1.5 meters, they can do the workof much larger, bulkier units. Theyalso feature an ultra-fast 100Hzswitching frequency, and durableepoxy resin transducers for longservice life.See pages 305-306See pages 284-285S17

18mm Diameter Ultrasonic SensorsP+F has introduced a new lineof 18mm diameter ultrasonicsensors. Notable featuresinclude potentiometer-freeadjustability, temperaturecompensation and a 35%reduction in mounting length(when compared to previousmodels). Both switch point andanalog versions are available.Ultrasonic Profile ReducerP+F Ultrasonic Profile Reducersallow low-profile mounting ofcylindrical ultrasonic sensors.By deflecting the beam 90°from the sensing plane, thesensor can easily be mountedon tanks, conveyors and otherspace-critical applications.See pages:266-269 for Switch Point288-289 for Analog Current288-289 for Analog VoltageSee pages 266-270AC Switch Point OutputThe AC Switch Point Outputultrasonic sensor features a700mA maximum loadcurrent and the ability toadjust the sensor's rangewith the simple turn of aknob. In addition, the cleartop of the sensor allows afull 330°of LED visibility.It is available with 500mmand 2m sensing distances.Limit Level ControlsPepperl+Fuchs limit levelcontrols convert analog currentor voltage signals to SPDT relayoutputs ideal for regulatinghigh and low levels of solidsor fluids. These controls arepowered by 120 or 240 VACinputs and provide relay outputs.See pages 264-265See pages 316-317S18

S19

ML4.1 Series F28 Series MLV11 Series FE7D SeriesPHOTOELECTRICSENSORSSURFACE MOUNTConvergent Beam Mode————Diffused Mode withBackground Suppression20, 40, 60, 80mm—150mm—Diffused Mode400mm400mm150, 300, 500mm700mmRetro-Reflective Mode400mm1.5, 2m6, 15m3mRetro-Reflective ModeClear Object Detection——3m—Retro-Reflective ModeForeground Suppression————Thru-Beam Mode2.5m5m15m10mFiber Adaptable————Housing H x W x L (mm)39 x 14 x 1926 x 12 x 2450 x 18 x 4545 x 20 x 45Light SourceInfrared, Visible redInfrared, Visible redInfrared, LaserInfrared, Visible redPower SupplyDCDCAS-Interface, DCAC/DCOutput TypePush-pullNPN, PNPNPN, PNP, AS-iRelayElectrical ConnectionNanoNano, CabledMicroCabledFEATURESSmall housing,universal outputSmall housing,switchableoperating modeEnhanced featuresvia OPUS software,adjustableconnectionAC/DC voltage and1 amp SPST relayin a small housingPAGES331-336337-342343-358359-362ML4.1 Subminiature PhotoelectricsDeceptively powerful, ML4.1 seriesfeatures up to an 8ft (2.5m) sensingrange in a compact 9/16" (14mm)wide housing. ML4.1 backgroundsuppression models offer the industry'sbest color insensitivity, and longrange, polarized retro-reflective modelsreliably detect even the shiniestmaterial. A universal outputeliminates the need for stockingmultiple output types.VCS110 Color SensorsWith the ability to recognize tencolors with one sensor, theVCS110 series surpasses allother color sensors. A simplethree step push buttonprogramming allows detectionof minute color variances onalmost any surface. Durablefiber optic cables allow forsmall light spot sizes andsensing ranges to 100mm (4").S20See pages 331-336See pages 663-668

MLV13 Series MLV40 Series HPJ Series HPA Series HPB Series MLV14 Series MHP Series——30mm———25, 63mm—80, 150mm—————400mm500mm—200, 800mm50, 500mm400mm150, 450mm6m1, 2m—4m2.5m3m2.4, 5.4, 9.1m—400mm————————————15m5m1.5m10m10m—30.4m—Fiber-dependent————Fiber-dependent45 x 18 x 3862 x 14 x 3132 x 8 x 1240 x 12 x 2133 x 12 x 2031 x 13 x 6230 x 16 x 65Visible redInfrared, Visible redInfrared, Visible redInfrared, Visible redInfrared, Visible redVisible redInfrared, Visible redDCDCDCDCDCAC/DC, DCDC, ACNPN, PNPNPN, PNPNPN, PNPNPN, PNPNPN, PNPNPN, PNP,ThyristorNPN, PNP,ThyristorNano, Micro,CabledMicro, CabledCabledCabledCabledMicro, CabledMicro, CabledSmall size, weaksignal output, longsensing rangeRugged metalhousing, widerange of modelsavailableUltraminiaturehousing, widerange ofaperturesSelf-diagnostics,mutual interferenceprotectionSelf-diagnosticsOne-touch teach,remote teach, weaksignal outputRugged housingcan withstand1200 psiwashdown363-370371-382383-392393-400401-404405-412413-426AccuTouch PhotoelectricsMHP SeriesThe new AccuTouch MLV14 seriesovershadows other competitivemodels while maintaining thesame industry-accepted housing.With a simple push-button set up,the Accutouch instantly adapts toan application. Multiple mountingoptions and integrated mode selectionmean more versatility than ever. DCmodels also feature a remote teachinput or a signal strength output.Miniature high performancephotoelectric sensors are rugged,powerful sensors packaged ina small, yet flexible housingdesign. Fully potted (IP69K)housing can withstand 1200 psiwashdown environments typicallyfound in the food and beverageindustry. Available in all thestandard modes including aconvergent beam with anadjustable sensing window.See pages 405-412See pages 413-426S21

Series 23 Series 25 Series 27 Series 28PHOTOELECTRICSENSORSSURFACE MOUNTConvergent Beam Mode————Diffused Mode withBackground Suppression500mm, 1, 2m300mm—400, 700mm, 2mDiffused Mode—800mm, 2m1.5m—Retro-Reflective Mode—4, 8m16m12mRetro-Reflective ModeClear Object Detection——6m—Retro-Reflective ModeForeground Suppression———9mThru-Beam Mode—10, 30m35m—Fiber Adaptable————Housing H x W x L (mm)91 x 27 x 6872 x 25 x 6480 x 25 x 5088 x 26 x 54Light SourceInfrared, Visible redInfrared, Visible redVisible redInfrared, Visible redPower SupplyAC/DC, AS-i, DCAC/DC, AS-i, DCDCAC/DC, DCOutput TypeNPN, PNP,AS-i, RelayNPN, PNP,AS-i, RelayNPN, PNPNPN, PNP,Push-pull, RelayElectrical ConnectionMicro, TerminalconnectionMicro, TerminalconnectionMicroMicro, Cabled,Terminal connectionFEATURESSharp cut-off andlong rangebackgroundsuppression, integraltimer optionBasicmid-rangeseriesOPUS-enhancedfeatures for longerranges thanMLV11 seriesLow operatingtemperature,highly visible LEDs,timer versionsPAGES427-438439-456457-466467-478Series 23 Sharp Cut-off PhotoelectricsAble to ignore reflective objects justmillimeters beyond the target location,Series 23 background suppressionphotoelectrics maintain precise cut-offsensing even at long distances.Series 23 can detect black and whiteobjects to within 5% of the same range.A range indicator on the housingallows easy set-up of the adjustablesensing range.Universal Series 28 PhotoelectricsOffering adjustable background suppressionand foreground suppression sensing,Series 28 photoelectrics can be set toignore metal machine panels behindtargets or shiny shrink-wrap in front oftargets. Series 28 performs at temperaturesas low as -40ºF/C, and has dual-positionLEDs visible from 15m (50 ft).S22See pages 427-438See pages 467-478

Series 32 Series 39 Series 91 M1K Series L2 Series MP Series MLS2 Series—————38, 100mm—400, 800mm———200mm——800mm800mm, 2m4,6m500mm400mm0.45, 0.9, 1.3, 3m—4, 10m7, 20m—3m6m1.8, 4.5, 6, 9.1m———————————————10, 30m20m———30.4, 60.9, 99m762m———Fiber-dependent—Fiber-dependent—72 x 22 x 4664 x 25 x 7585 x 20 x 5030 x 30 x 10040 x 40 x 67Varies203 x 127 x 112Infrared, Visible redInfrared, Visible redInfrared, Visible redInfrared, Visible redVisible redInfraredInfraredDCAC/DC, AS-i, DCAC, DCAS-i, DCDCAC, DC, AC/DCACPNPNPN, PNP,AS-i, RelayNPN, PNP, RelayNPN, PNP, AS-iNPN, PNPNPN, PNP,Thyristor, RelayRelayMicroMicro,Terminal connectionMicro, CabledMicro,Terminal connectionMicroNano, Micro, CabledTerminal connectionTerminal connectionSmall housingfor longsensing rangesWeak signaloutputs available,timer versionsCost-effectiveretro-reflectiveseries25-position head,cross talkprotection5-way head,compact housingModular design,harsh duty2500 ft scanningrange— nearlyhalf a mile479-486487-496497-502503-512513-516517-548 549-552FE7W SeriesMP SeriesSpecialty sensor used primarilyto prevent automatic guidedvehicles (AGVs) from collidingwith objects and persons in theirpath. These sensors mount on thefront and/or back of AGVs operatingindoors in a controlled environment.Sensor functions are completelyflexible and controllable withoutmanual intervention. Sensor mayalso be used as an area scanner.P+F's most versatile photoelectric sensorline. A fully modular design, whereexchangeable rotatable sensing headsare combined with a wide variety of plug-inbases. Once assembled, the sensorsprovide superior sealing and corrosionresistance to withstand harsh environmentsincluding 1200 psi washdown. Full functiontimer/logic cards are also available withup to 30 second time delays.See pages 709-712See pages 517-548S23

MLS7 Series MLS8 Series Slot SensorsEDM DistanceMeasurementPHOTOELECTRICSENSORSCYLINDRICAL ANDSURFACE MOUNTConvergent Beam Mode————Diffused Mode withBackground Suppression————Diffused Mode———5mRetro-Reflective Mode3m4.5, 12.1m—20mRetro-Reflective ModeClear Object Detection————Retro-Reflective ModeForeground Suppression————Thru-Beam Mode——10-220mm—Fiber Adaptable————Housing H x W x L (mm)87 x 26 x 50189 x 89 x 64Varies80 x 34 x 85Light SourceInfraredInfraredInfraredInfraredPower SupplyDCACDCDCOutput TypeNPNRelayNPN, PNP4-20mA & PNPElectrical ConnectionCabledTerminal connectionMicro, CabledTerminal connectionFEATURESHeavy dutypackageHarsh dutylarge housingVariety of housingstyles and sizes,sensitivityadjustmentsoptionalAnalog outputfor distancemeasurementPAGES553-556557-560561-570571-576Luminescence SensorsDetecting inks, greases, glues, paints,and chalks with luminescent additivesallows the RL-UV series to detect targetsthat contrast sensors cannot. Markson irregular backgrounds and invisiblemarkings are easily sensed by theUV source. Tamper-proof seals, chalkmarks, and invisible ink are alsodetected at up to a 130mm (5") distance.Slot Style PhotoelectricsP+F's broad range of slot sensors withslot widths ranging from 10mm (3/8")to 220mm (9") allows simple one-piecemounting of a thru-beam configuration.With no need for alignment of the lightbeam, slot sensors provide an economicalalternative to two-piece thru-beam sensors.Applications include edge guiding, webdetection, end of travel indication, andgear tooth speed monitoring.S24See pages 659-662 See pages 561-570

NAMUR Versions KT9 Series KT11 Series GLV12 SeriesCP18 Series18mm DiameterBasic Series18mm DiameterFlat Series18mm Diameter————————————100mm50, 100, 225mm300mm50mm50mm200mm100, 200, 400mm200, 500mm—2m——1, 2m1.5, 4m4m3m———————————————250mm250mm5m30m10m—Fiber-dependent30 x 30 x 102Infrared, Visible redDC (NAMUR)—4mm diameter35, 45mm lengthsInfraredDC—M5 diameter35, 45mm lengthsInfraredDC—M12 diameter55, 65mm lengthsVisible redDC—M18 diametervarious lengthsVisible redAC/DC, DCFiber-dependentM18 diametervarious lengthsInfrared,Visible red, LaserDC—Flat 18mm diametervarious lengthsInfrared, Visible redAC/DC, DCNAMURNPN, PNPNPN, PNPNPN, PNPNPN, PNP,ThyristorNPN, PNPNPN, PNP,ThyristorTerminal connectionNano, CabledNano, CabledMicro, CabledMicro, CabledMicro, CabledMicroFor intrinsic safety(hazardous area)applicationsAlternativeto fibers, widebeam angleAlternativeto fibers, widebeam angleLight on/ Dark onselectable bywiringEconomicalone-piecelens/housingShorter housinglengths and longersensing rangesthan former series3 lens positions,mount on side orthru-hole557-584585-588589-594595-602603-612613-624625-634Light GridsCP18/Basic Series PhotoelectricsP+F's new light grids provide apowerful solution to area sensingwith no need for remote controllers.The PR series miniature light gridsprovide a simple means of smallparts detection in a 116mm (4.5")length housing. The PLVscanseries is available with fieldheights from 300mm to 3m (1-10')and features programmable beamconfigurations and outputs forfour height levels.P+F's most economical photoeye series isavailable in either a nickel-plated brass ora one-piece polycarbonate housing. TheBasic Series 18mm diameter photoelectricshave been improved to yield longer sensingranges, faster response times and improvedambient light resistance while being 10mmshorter in overall length. Added accessoriesinclude swivel type brackets and aperturehoods designed to scan between conveyorrollers with clearance gaps as close as 1/8".See pages 669-686 See pages 603-624S25

30mm DiameterSeriesSU14 Series SU15 Series HPX SeriesPHOTOELECTRICSENSORSCYLINDRICAL ANDSURFACE MOUNTConvergent Beam Mode————Diffused Mode withBackground Suppression150mm———Diffused Mode2.5m———Retro-Reflective Mode10m———Retro-Reflective ModeClear Object Detection————Retro-Reflective ModeForeground Suppression————Thru-Beam Mode250m———Fiber AdaptableHousing H x W x L (mm)—M30 diameter,99, 104mm lengthsFiber-dependent31 x 12 x 69Fiber-dependent36 x 12 x 59Fiber-dependent28 x 10 x 60Light SourceInfrared, Visible redInfrared, Visible redVisible redVisible redPower SupplyAC/DC, DCDCDCDCOutput TypeNPN, PNP,ThyristorNPN, PNPNPN, PNPNPN, PNPElectrical ConnectionMicro, CabledNanoNano, CabledMicro, CabledFEATURESRugged series,high gainthru-beamPotentiometeradjustable, forglass or plasticfibersOPUS-programmable,for glass orplastic fibers5 models availablePAGES635-644713-716 717-724 725-734HPX-T SeriesFiber Optic CablesDIN-rail mountable plastic fiber opticamplifier with a digital display. Thedisplay indicates level of light reception,level of margin, tuning status, errors,and off delay status. The amplifier canbe set for simple position sensing oradvanced contrast sensing. Built-inauto tuning and single-touch snapaction lever for fiber attachmentmake set-up easy and convenient.P+F has greatly expanded its selectionof fiber optic cables in both plastic andglass styles. New plastic cables includesmall diameter side view sleeves, coiledfibers for moving elements, and highperformance units capable of 6mthru-beam sensing. New glass cablesinclude rectangular housing tips thatcreate small light grids, high temperature(900ºF) cables, and high power lensescapable of 15m thru-beam sensing.S26See pages 729-734 See pages 735-764

ContrastSensorsLuminescenceSensorsColor SensorsLight GridsOptical DataCouplersFE7W SeriesAPPLICATIONSPECIFICPHOTOELECTRICS————DAD10 - parallel—DK10Potentiometerprogrammable——ELG-E/ELG-S240mm field heightDAD30 - serial(RS-232, RS-422,CL20mA)—ClassificationDK10-LASLaser light source——LG235, 470mmfield heightLS230-DA - serial(RS-232, RS-422,CL20mA)—DK(E)20, DK(E)21Push-buttonprogrammable—DF20Single channelPR102mm field heightLS600-DA-P - serialPROFIBUS—RL5-LLFiber-opticRL-UVVCS110Five or tenchannelsPLVscan300-3056mmfield heightLS600-DA-IBS-serialINTERBUS—Operating Range1.5, 9.5, 25,300mm, 10m28, 130mm9.5, 25, 100mm90mm - 8m1.5m - 230m3mHousingH x W x L (mm)Varies86 x 36 x 63VariesVariesVaries45 x 100 x 60Light SourceGreen, Red, orBlue LEDs, LaserUltravioletWhite, Red, Green,Blue LEDsInfraredInfraredInfraredPower SupplyDCDCDCDCDCDCOutput TypeElectricalConnectionPush-pull, AnalogMicroNPN, PNP, AnalogMicro, CabledNPN, PNPMicroPNP9-pin connector,terminal connectionMicro, CabledVaries9-pin connector,terminal connectionNPNCabledPAGES645-658 659-662 663-668 669-686 687-708 709-712Contrast SensorsThe push button programmable DK seriesautomatically selects the optimum colorlight source for contrast detection fromthree integral LEDs. A 30µs responsetime ensures high-speed detection ofregistration marks. 90º movement of lensposition and alternate light spot sizesand orientations allow customization tothe application. RL5-LL series enablesfiber optic adaptability.Wireless Data TransmissionImmune to noise and cableflexibility restrictions, the DADand LS series optical datacouplers allow wirelesstransfer of data communicationwith an IR light beam. P+Fintroduces these cost-effectivealternatives to RF and cabledata transmission for bothparallel and serial data transferat up to 230m (750 ft).See pages 645-658 See pages 687-708S27

Cylindrical LaserMLV40 Miniature PhotoelectricsP+F's E18-LAS/EV18-LASlaser thru-beam detects a1.2mm target with a 10m(32 ft) separation. Alongwith a signal strength outputand LED indicator, the sensorhas a test input for thetransmitter. Applicationsinclude stack heightmonitoring, hole detection,and precision positioning.P+F introduces the MLV40 series,a miniature and robust newaddition to the photoelectricsensors. The metal-housed seriesboasts a full range of six modes,including clear object detectionand fiber optic adaptable versions.See page 619See pages 371-382SU15 Programmable Fiber Optic SensorA 12mm (1/2") wide DIN-railmountable fiber optic sensor,the SU15 series is programmablevia an optical link forsuch enhanced parametersas timing functions, logicinputs, and hysteresisadjustment. Adaptable toboth plastic and glass fibers,the SU15 allows targetdetection at temperaturesover 500ºF (260ºC).Miniature Cylindrical PhotoelectricsP+F's KT9 (4mm) and KT11 (5mm(3/16") diameter) cylindricalphotoelectrics offer an easy andinexpensive alternative to fiberoptic cables. As no remoteamplifier is required, stockingrequirements are simplified.Clear and opaque objects areeasily detected with the sensor'sdivergent beam.See pages 717-724See pages 585-594S28

S29

UniversalMountingBracketAdjustableMountingBracketsRightAngleBracketsCushionedMountingBracket/BlocksSENSORACCESSORIESCapacitive•••Inductive••••Ultrasonic•••Photoelectric•••Holds allcylindricalsensorsHolds allcylindricalsensorsMost popularbracket styleSpring loadedbracket absorbsimpactsFEATURES360º rotationalpositioning inboth x andy axisHoldsfiber opticcables12, 18 and30mm sizesEasyinstallationTough CrastinconstructionStainlesssteelconstructionAnodizedaluminumand steelconstructionPAGES830 830 830 833Test InstrumentsThe ST-03 is a universal, compact sensortesting device that fits in the palm of yourhand. NAMUR and self-contained DC inductive,capacitive, ultrasonic and photoelectricproducts are quickly evaluated via connectionto the ST-03's push-button terminals. Anaudible tone and LED indicator signal thesensor's output status.Exchanger BracketChange out your cylindrical sensorsin seconds without losing the originalposition of the sensor. Simply slidein the replacement sensor, tightenthe nut, and the stop-shoulderensures the sensor retains itsprecise location.S30See page 835 See page 832

ConduitAdaptersExchangerBracketsProbeTipAdaptersSightGlassMountsEndStopAdapterUnistrutBracketsMountingFlangesReflectors••••••••••••••••••For all 12, 18,and 30mmdiametersensorsEasily removeand installsensors withoutre-adjustmentsFor 8 and12mm inductivesensorsFor 30mmCapacitivesensorsFor 8mmshieldedInductivesensorsThe most popularaccessory forlimit switchstyle sensorsCapacitivemodels keeptanks sealedif sensor isremovedWide varietyof materials,shapes, sizesand reflectivityConvertsmetric-threadedsensors to 1/2”NPT threadFor all 12, 18,and 30mmsensors50mmspring loadedprobeAttaches sensorto sight glassfor level monitorSpring-loadedpiston triggerssensorSecures sensorto standardUnistrut RailMade of durableTeflon or DelrinmaterialFor use withphotoelectricsensorsStop-shouldermaintainssensing gapStainlesssteelconstructionAccommodatesglass or plastic9.5 to 38mmdiameter tubesAvailable in25 and 50mmlengthsCan be rotated360º in 1.87ºincrementsUltrasonicunit hasthru-holeSelf-adhesivereflective tapealso available836 832 832 832 833 834 836 832-840High Visibility Cylindrical Pilot LightsCordsetsLED18 Series pilot lights offerhigh-visibility status indication ina compact, fully encapsulatedhousing. Available in red, yellow,green, or all three combined, theIP 67/ NEMA 6P-rated LED18 requiresno additional enclosures, conduit orseal-tite. Simple 18mm diameterthrough-hole mounting permitsinstallation anywhere within thework area, in clear view of machinecell and conveyor line operators.P+F's cordset line includes Mini,Micro, and Nano styles in straightor right angle versions. Nano andMicro DC styles are also availablewith LEDs. A wide variety of cablejacket materials are available toaccommodate dirty, oily and wetindustrial requirements. Weldslag-resistant models withstandthe harshest of welding environmentsand a special strain reliefguarantees long life.See page 835 See pages 771-808S31

MiniMicroNanoCORDSETSANDJUNCTIONBLOCKSPAGE PAGE PAGEReceptacles777, 778784, 792, 797804, 808STOOW Cable Jacket773-775——SOOW Cable Jacket776——Standard Wire Colors773-775782-793, 795, 796805-807Automotive Wire Colors776794—Extension Cables779-782799-801—PVC Cable Jacket—785-787, 791, 793-795805-807PUR Cable Jacket—785-788—Braided Cable—795—NAMUR—790—Power and Status LEDs—791807Dual-Port Junction Block—820-825—4-Port Junction Block810, 811814-816—6-Port Junction Block810, 811——8-Port Junction Block810, 811814-816—Pepperl+Fuchs ® Inc. • Telephone (330) 486-0001 • FAX (330) 405-4710 • E-mail: sales@us.pepperl-fuchs.com • www.am.pepperl-fuchs.com“Terms & Conditions of Sale” information is printed on everyorder acknowledgement; copies are available upon request.We reserve the right to make modifications and no guaranteeof the accuracy of the information contained herien is given.© 2002 Pepperl+Fuchs ® Inc., Twinsburg, OhioSENG0502 (L10546) Printed in U.S.A