Prisma Plus G - Schneider Electric

More documents

Recommendations

Info

PresentationIEC 61439 standardThe switchboard,central to the electrical installationBoth the point of arrival of energy and a device for distributionto the site applications, the LV switchboard is the intelligenceof the system, central to the electrical installation.It plays an essential role in the availability of electric power, while meeting the needs of personal and property safety.Its definition, design and installation are based on precise rules; there is no place for improvisation. The IEC 61439 standardaims to better define "low-voltage switchgear and controlgear assemblies", ensuring that the specified performances arereached. It specifies in particular:> the responsibilities of each player, distinguishing those of the original equipment manufacturer; the organizationthat performed the original design and associated verification of an assembly in accordance with the standard,and of the assembly manufacturer - the organization taking responsibility for the finished assembly;> the design and verification rules, constituting a benchmark for product certification.All the component parts of the electrical switchboard are concerned by the IEC 61439 standard. Equipment producedin accordance with the requirements of this switchboard standard ensures the safety and reliability of the installation.A switchboard must comply with theequirements of standard IEC 61439-1 and 2to guarantee the safety and reliability of theinstallation. Managers of installations, fullyaware of the professional and legal liabilitiesweighing on their company and on themselves,demand a high level of safety for the electricalinstallation.What is more, the serious economicconsequences of prolonged halts in productionmean that the electrical switchboard mustprovide excellent continuity of service, whateverthe operating conditions.The Schneider Electric solution> Specify switchboards that comply withstandard IEC 61439-1 and 2.> guarantee a level of safety that has been100 % tested, from the day the switchboardis installed and throughout its service life.> ensure a lasting investment through easyupgrading of the installation in compliancewith the standard.> guarantee that the switchboard complieswith the technical specifications.Prisma Plus tested switchboardsThe conformity of the switchboard has been testedand proven.A Prisma Plus switchboard is:> made up of Schneider Electric low-voltage devices andcomponents that all comply with the applicable standards;> based on configurations in our catalogue;> made up of Prisma Plus mechanical and electricalcomponents that have been subjected to the verificationof original equipment manufacturer;> mounted and wired by a panelbuilder in compliancewith professional standards;> subjected to the individual verification.Schneider Electric makes available to the panelbuildereverything required to create tested Prisma Plusswitchboards, including the basic configurations inthe low voltage distribution catalogue, all the documentationfor switchboard design and mounting, calculation anddesign software, etc.Panelbuilders can demonstrate conformity with standardIEC 61439-1 and 2 by presenting the declarations orcertificates of conformity for type tests carried out byindependent laboratories (ASEFA, ASTA, KEMA, etc.)and supplied by Schneider Electric. The panelbuilderis responsible for the individual routine verification anddelivers the corresponding declarations of conformity.16
Original Manufacturer and Assembly Manufacturer:Both involvedin tested assembliesStandard IEC 61439 clearly definesthe type of verifications that must be conductedby both organisations involved in final conformity ofthe solution: the Original Manufacturer, guaranteeingassembly system design and the AssemblyManufacturer, responsible for the final conformityof the switchboard.Project specification*Specifier> Specifies the needs andconstraints for design,installation, operation andupgrading of the completesystem.> Checks that itsrequirements have been fullyintegrated by the AssemblyManufacturer. Depending onthe application, the specifiercould be the end-user or adesign office.OriginalManufacturerThe organisation that hascarried out the originaldesign and the associatedverification of an assemblysystem.Assembly SystemAssemblyManufacturer(Panel builder)The organisation (whetheror not the same as the OM)responsible for thecompleted assembly.He is responsible for"Routine verifications"on each panel produced,according to the standard.If he derivates from theinstructions of the originalmanufacturer he has to carryout again design verifications.Tested AssemblyEnd-UserShould ask for a certifiedLV switchboard.By systematically requestingroutine verifications,he ensures that the assemblysystem used is compliant.He is responsible for the"Design verifications" listed byIEC 61439-2 including manyelectrical tests.* Schneider Electric has developeda specification guide.17
Page 3 and 4: Prisma Plus GIndexp. 2Determining c
Page 5 and 6: IndexAlphabetical indexDesignationP
Page 7 and 8: IndexCatalogue number indexCat. no.
Page 13 and 14: Prisma Plus:the optimised, tested a
Page 15 and 16: P System3200 A630 A> Hospitals> Bot
Page 17: upgradeable LV switchboards…optim
Page 21 and 22: IEC 61 439-1 paragraph 11.4Protecti
Page 23 and 24: PresentationExamples of switchboard
Page 25 and 26: PresentationExamples of switchboard
Page 27 and 28: PresentationDetermining catalogue n
Page 29 and 30: PresentationDetermining catalogue n
Page 31 and 32: Functional systemContentsPresentati
Page 33 and 34: Functional systemPresentationThe Pr
Page 35 and 36: Functional systemFunctional unitsan
Page 43 and 44: OFFOI ONIONFunctional systemFunctio
Page 47: Functional systemFunctional unitsan
Page 54 and 55: 00604010060401000604010006040100Fun
Page 56 and 57: 1004060Functional systemFunctional
Page 58 and 59: Functional systemAccessoriesFront p
Page 60 and 61: Functional systemAccessoriesFixing
Page 62 and 63: Functional systemAccessoriesCable r
Page 64 and 65: Functional systemAccessoriesSwitchb
Page 66 and 67: Functional systemAccessoriesManagem
Page 68 and 69:
Functional systemDistributionPanora
Page 70 and 71:
Functional systemDistributionNon-Ce
Page 72 and 73:
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Functional systemDistributionCentra
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Prisma Plus Genclosures
Page 92 and 93:
Prisma Plus G enclosuresIP30, IP31,
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Prisma Plus G enclos
Page 105 and 106:
Page 107 and 108:
Page 109:
Prisma Plus G enclosuresIP55 enclos
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Pack enclosures
Page 124 and 125:
Pack enclosures
Page 126 and 127:
Pack enclosuresPack wall-mounted an
Page 128 and 129:
Pack enclosuresAccessoriesGland pla
Page 130 and 131:
Pack enclosuresDistributionInsulate
Page 132 and 133:
Pack enclosuresDistributionDistribu
Page 134 and 135:
Pack enclosuresAccessoriesDD381819C
Page 136 and 137:
Pack enclosuresDimensionsWall-mount
Page 138 and 139:
Additionalinformation
Page 140 and 141:
Additional informationElectrical ch
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Additional informationStandardsStan
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Additional informationEnclosure cha
Page 156 and 157:
Page 158 and 159:
Page 160 and 161:
Page 162 and 163:
Additional informationThermal chara
Page 164 and 165:
Page 166 and 167:
Page 168 and 169:
Page 170:
168Notes
show all

Prisma Plus G - Schneider Electric

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?