Linear bearings and units
Linear bearings and units
Linear bearings and units
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Axial <strong>and</strong> rotational www.lmotion.ru fixation skf@lmotion.ru Тел. (495)-921-34-60- for LBC <strong>and</strong> LPA linear <strong>bearings</strong>F WF WDesign 1 Design 2F WF WDesign 3 Design 4Dimensions Design 1) Appropriate Grub Pins 4)F w K 1 K 2 sgrease nipples 2) screws 3) Diametermm — mm5 6) - - - - - - -8 6) - - - - - - -12 3,0 3,0 - 1 VN-LHC 20 M 4 316 3,0 - - 2 VN-LHC 20 M 4 320 3,0 - - 2 VN-LHC 20 M 4 325 3,5 3,0 1,5 3 VN-LHC 40 M 5 3 / 3,530 3,5 3,0 2 4 VN-LHC 40 M 5 3 / 3,540 3,5 3,0 1,5 4 VN-LHC 40 M 5 3 / 3,550 4,5 5,0 2,5 4 VN-LHC 50 M 6 5 / 4,560 6,0 2,5 5 4 VN-LHC 80 M 8 6 5)80 8,0 2,5 5 4 VN-LHC 80 M 8 8 5)1)All linear plain <strong>bearings</strong> of Design 22)Recommendations for holes to take grease nipples: see page 26.3)Grub screws according to DIN 417 <strong>and</strong> ISO 7435 or DIN 915 <strong>and</strong> ISO 4028.4)Straight pins according to DIN 7, slotted pins - DIN 1481 or grooved pins - DIN 1470 <strong>and</strong> DIN 1471.5)Grub screw according to DIN 551 / ISO 4766 or DIN 913 / ISO 4026.6)<strong>Linear</strong> ball <strong>bearings</strong> are self-retaining when mounted in housings of at least bearing length.Retaining rings are required with shorter housings.25