Operation Manual - Home Mega Global Solution

INTRODUCTIONThe DSE 606 Module, has been designed to allow the OEM to meet most of the industry’s complexspecifications. It has been primarily designed to allow the user to start and stop the generator,transfer the load to the generator either manually or automatically. The user also has facility to viewall the system operating parameters via the LCD display.Once started the DSE 606 module monitors the engine, indicating the operational status and faultconditions; automatically shutting down the engine and giving a true first up fault condition of anengine failure by a flashing LED and other simultaneous faults by a steady LED. This information isalso indicated by the LCD display on the front panel.Selective operational sequences, timers and alarm trips can be altered by the customer via either thefront panel controls of via a PC.Access to critical operational sequences and timers for use by qualified engineers, are barred by asecurity code.The module is housed in a robust metal case for the front panel mounting. Connections to the moduleare via locking plug and sockets.CLARIFICATION OF NOTATION USED WITHIN THIS PUBLICATION.NOTE:CAUTION!:WARNING!:Highlights an essential element of a procedure to ensurecorrectness.Indicates a procedure or practice which, if not strictly observed,could result in damage or destruction of equipment.Indicates a procedure or practice which could result in injury topersonnel or loss of life if not followed correctly.ªDeep Sea Electronics Plc owns the copyright to this manual, whichcannot be copied, reproduced or disclosed to a third party withoutprior written permission.4606 OPERATING MANUAL ISSUE 2 11/27/00 MR