Composite mold resurfacing - Hawkeye Industries

More documents

Recommendations

Info

Polishing the <strong>mold</strong>Using a professionalbuffer, polish with a softpolishing pad.
Polishing the <strong>mold</strong>While polishing, thesurface should look wet.If not, add moreGlossMaster.Polishing speeds willvary depending onpolishing styles, but wehave found that speedsof 2400 rpm work well.
Page 1 and 2: COMPOSITE MOLD RESURFACINGWITH DURA
Page 3 and 4: Repair vs. Resurfacing Chips, crack
Page 5 and 6: Prepping the MoldThe surface should
Page 7 and 8: Prepping the moldWipe thesandedsurf
Page 9 and 10: Product preparationCatalyze at 2 pe
Page 11 and 12: Spraying the moldFollow with wet pa
Page 13 and 14: Allowing the mold to dryThe primer
Page 15 and 16: Cleaning the moldWipe the surface w
Page 17 and 18: Product PreparationThoroughly stir
Page 19 and 20: Spraying the topcoatWe recommend a
Page 21 and 22: Curing the topcoatAllow the topcoat
Page 23 and 24: Compounding the moldRemove scratche
Page 25 and 26: Compounding the moldUsing a profess
Page 27 and 28: Compounding the moldBuff the surfac
Page 29: Polishing the moldApplication—App
Page 33 and 34: Polishing the moldPolish until the

Composite mold resurfacing - Hawkeye Industries

Create successful ePaper yourself

Delete template?

Save as template?