water level measurement pertinent well data coding procedure manual

3. CHANGE IN LEVEL SINCE 'THE LAST MEASUREMENT:,No entry needed, the comp\iter calculates this value which will appear onsubsequent printouts.If needed, simply determine the 'difference betweenthe current m~asurement and the immediately preceding one.4~' MEASUREMENT NUMBER:", "Entry in'this column should ,be made iCE'1l!or,e than one measurement on the.' '. !.same date i~ t'o, be' add~d' to the, com~uter:tape." Enter eachmeasuremen:t , ". ,.,.', ,-in chronological order on ~:~parate'iines in the "Depth to Water from' MP". ,.:-,column"Nurriber':t:he. measurements beginning with the number "1" and pr9-'• f:ceedirig with "2", "3", etc", in 'this' column ..until all measUJ,ements entered-'., 'for, the 'l'ar'ticul'ar', date have' been numbered.~ 'j.' j .. 1-' ;\.Repeat the'measurement date,c. fo{, each measurement'.5', ' DEPTH TO lfATER FROM MP,:," ', ','"