ADI Process Analyzers

10Preconditioning andintegrated systemsNot only the chemical analysis, but also the sample preparationor preconditioning is of utmost importance forthe success of an Metrohm Applikon Analyzer. Fur ther -more, the location of the analyzer contributes significantlyto the quality of the analysis. The sample needs to beas representative as pos sible, which means that thesamp ling point needs to be as close to the analyzer aspossible.Metrohm Applikon can engineer and supply virtually any«unit operation» for sample preconditioning:Heavy duty sampling panel• Pressure reduction• Cooling• Heating, heat tracing• (ultra) filtration• Precipitation and settling• Dilution to avoid crystallization• Degassing• Homogenizing• Flow metering• Phase separationWith more than 35 years of experience Metrohm Applikoncan provide a complete and exact solution for almost anyapplication. Projects range from one Analyzer in combinationwith simple sample preparation to complete turnkeypackages with shelters, piping, wiring and interfacing.On-site, only the necessary utilities and the samplestream need to be connected, saving a lot of time andenergy in the start-up phase of the instrument.Air pneumatic multi-stream panelLiquid-to-gas samplingAnalyzer shelter with integrated sample preconditioning systemBlow-back filter