Specifications and additional Information - Boral

About This Guide
BOOK
3
PAGE
A6
Boral Masonry Construction Solutions
Boral Masonry offers a comprehensive range of proven
products and systems including Segmental Paving Products,
Masonry Blocks, Masonry Bricks, Masonry Fire and Acoustic
Wall Systems and Segmental Block Retaining Wall systems.
What’s in this Guide
The Boral Masonry Paving guide details a comprehensive
range of concrete paving products appropriate for
pedestrian, light traffic, commercial traffic, and industrial
applications.
Boral Masonry is at the forefront in design and manufacture
of paving systems developed specifically for commercial,
architectural and public area landscaping.
Boral Masonry is paving the way with the innovative use
of materials and technology to create pavers that have
the design flair and engineering qualities to exceed the
expectations of the most challenging paving projects.
This guide has been prepared as a comprehensive Boral
Product Reference Guide. It does not attempt to cover all
the requirements of the Codes and Standards which apply
to paving construction. All detailing should be checked and
approved by an appropriate engineer before construction.
A Guided Tour of a Typical Product Information Page in Book 3: Paving
Product pages are laid out in a consistent manner to assist with easy selection and specification of Boral pavers.
Book, Page
and Section
Identification
Product Icons
with dimensions
for products
available in your
region/state
Colour Swatch
Bradstone ® Classic Style Pavers
Large Format Paving Systems
BOOK
3
PAGE
D11
Flagstone and cobblestones have enhanced patios and recreate this warm, character-filled look in Australia with
gardens in Europe for centuries. Now it is possible to internationally renowned Bradstone from Boral.
450
Product
Old Town
40
300
40
300
450
Old Town Bullnose
50
450
300
Cobblestone
*A
40
300
*B
300
40
450 300
*C
40
600
300
Old Town Random
Suitable application legend
grey green gironde
Application and usage
7.4 units per sq metre
2.22 units per lineal metre
7.4 units per sq metre
7.5 units per sq metre
Pedestrian Pools
Boral reserves the right to change the contents of this guide
without notice.
Please note that this guide is based on products available
in New South Wales at the time of publication from Boral
Masonry.
Unit
weight (kg)
12.1
12.1
15.5
A) 8.3
B) 12.1
C) 16.5
Specifications and additional information
Content Cement, sand, aggregate, colour oxide
Dimensional Category DPB1
Characteristic Breaking Load (kN) 5
Abrasion Resistance Class 3,5
Slip Resistance Class V
Salt Tested to AS/NZS4456.10 Yes
Manufacturing and Test Standard AS/NZS4455, 4456 and 4586
Ordering Requirements No minimum order quantity applies
Lead Time 0-2 weeks
Bulk Ordering Requires extended lead times
Application Refer to product/laying system selection table on page�A3 in this
guide Random pattern on D10
Colour and Texture Variation: The supply of raw
materials can vary over time. In addition, variation can
occur between product types and production batches. Also
please recognise that the printed colours in this brochure
are only a guide. Always ask to see a sample of your
colour/texture choice before specifying or ordering.
Terms and Conditions of Sale: For a full set of Terms
and Conditions of Sale, please contact your nearest Boral
Masonry sales office.
Product Name or
other identifying
feature, such as
texture finish
Product Information
relating to features,
applications, colours
available by region
Application Icons Legend.
These products are
recommended for the
indicated applications
(subject to appropriate
laying systems and site
conditions and to region
available)
Product
Specifications