Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>VIPER</strong> <strong>Technical</strong> <strong>Manual</strong>Detailed hardware descriptionFPIF-LVDS-TX detailsThe FPIF-LVDS-TX enables LVDS displays to be connected to the <strong>VIPER</strong>.The FPIF-LVDS-TX in combination with the FPIF-LVDS-RX allows the <strong>VIPER</strong> to drive aTFT or STN LCD flat panel display up to 10 meters away.When using the FPIF-LVDS-TX, ensure the <strong>VIPER</strong> JP2 jumper is set to select3.3V to power the LVDS transceiver. Do not select 5V as damage will occur tothe LVDS transceiver.JP1J2J1J3JP2JP3The connectors on the following pages are shown in the same orientation as thepicture above, unless otherwise stated.ConnectorJP1JP2JP3J1J2J3FunctionTX strobe selectionCable power selectionMSL selection<strong>VIPER</strong> LCD output cable connectorLVDS Hirose connectorLVDS MDR connector© 2007 Arcom Issue D 43
Change language