Domnick Hunter Compressed Air Dryers - regula servis

More documents

Recommendations

Info

Dryer PerformanceDryer ModelsDewpoint(Standard)ISO 8573-1:2001Classification(standard)Dewpoint(Option 1)ISO 8573-1:2001Classification(Option 1)Dewpoint(Option 2)ºC ºF ºC ºF ºC ºFISO 8573-1:2001Classification(Option 2)MXS -40 -40 Class 2 -70 -100 Class 1 -20 -4 Class 3MXA -40 -40 Class 2 -70 -100 Class 1 -20 -4 Class 3Product SelectionPNEUDRI MXStated flows are for operation at 7 bar g (100 psi g) with reference to 20°C, 1 bar a, 0% relative water vapourpressure. For flows at other pressures apply the correction factors shown.Model Pipe Size L/s m 3 /min m 3 /hr cfmSingle BankMulti-BankMX 102C G 2 113 6.81 408 240MX 103C G 2 170 10.22 612 360MX 103 G 2 213 12.78 765 450MX 104 G 2 283 17.03 1020 600MX 105 G 2 1 /2 354 21 1275 750MX 106 G 2 1 /2 425 26 1530 900MX 107 G 2 1 /2 496 30 1785 1050MX 108 G 2 1 /2 567 34 2040 1200MX 205 G 2 1 /2 708 43 2550 1500MX 206 G 2 1 /2 850 51 3060 1800MX 207 G 2 1 /2 992 60 3570 2100MX 208 G 2 1 /2 1133 68 4080 2400MX 306 G 2 1 /2 1275 77 4590 2700MX 307 G 2 1 /2 1488 89 5355 3150MX 308 G 2 1 /2 1700 102 6120 3600Correction FactorTemperature Correction Factor CFTMaximum InletTemperature°C 25 30 35 40 45 50°F 77 86 95 104 113 122CFT 1.00 1.00 1.00 1.04 1.14 1.37Pressure Correction Factor CFPMinimumInlet Pressurebar g 4 5 6 7 8 9 10 11 12 13psi g 58 73 87 100 116 131 145 160 174 189CFP 1.60 1.33 1.14 1.00 0.89 0.80 0.73 0.67 0.62 0.57Dewpoint Correction Factor CFDRequiredDewpointPDP °C -20 -40 -70PDP °F -4 -40 -100CFD 0.91 1.00 1.43Dryer SelectionTo correctly select a dryer model, the flow rate of the dryer must be adjusted for the minimum operating pressure and, maximum operationaltemperature of the system. If the dewpoint required is different to the standard dewpoint of the dryer then the flow rate must also be adjustedfor the required outlet dewpoint.1. Obtain the minimum operating pressure, maximum inlet temperature and maximum compressed air flow rate at the inlet of the dryer.Obtain the outlet dewpoint required.2. Select correction factor for maximum inlet temperature from the CFT Table (always round up e.g. for 37°C use 40°C correction factor)3. Select correction factor for minimum inlet pressure from the CFP table (always round down e.g. for 5.3 bar use 5 bar correction factor)4. Select correction factor for required outlet dewpoint from the CFD table5. Calculate minimum drying capacityMinimum Drying Capacity = <strong>Compressed</strong> <strong>Air</strong> Flow x CFT x CFP x CFD6. Using the minimum drying capacity, select a dryer model from the flow rate tables above (dryer selected must have a flow rate equal to or greaterthan the minimum drying capacity)If the minimum drying capacity exceeds the maximum values of the models shown within the tables, please contact Parker domnick hunter foradvice regarding larger multi-banked dryers.
Technical DataDryerModelsMin Operating Max Operating Min Operating Max Operating Max AmbientNoiseElectrical ElectricalPressure Pressure Temp Temp TempThread Levelsupply supplyConnectionsbar g psi g bar g psi g °C °F °C °F °C °F(standard (optional)dB (A)MXS 4 58 13 190 2 35 50 122 55 13185 - 265 V1ph 50/60HzN/ABSPPor NPT
Page 4 and 5: The PNEUDRI modular designThe PNEUD
Page 6 and 7: Air qualityAdsorption dryers remove
Page 8 and 9: PNEUDRI OperationDrying of Compress
Page 10 and 11: Saving energy with the dewpoint dep
Page 12 and 13: PNEUDRI MPXHeatless (PSA) Regenerat
Page 14 and 15: Technical DataDryerModelsMin Operat
Page 18 and 19: PNEUDRI DHHeat Regenerative (TSA) R
Page 20 and 21: Technical DataDryerModelsMin Operat
Page 22 and 23: Dryer PerformanceDryer ModelsDewpoi
Page 24 and 25: PNEUDRI MiDASA totally clean and dr
Page 26: Technical DataDryerModelsMin Operat

Domnick Hunter Compressed Air Dryers - regula servis

Create successful ePaper yourself

Delete template?

Save as template?