13.07.2015 Views

VCI - Virtual CAN Interface - Ixxat

VCI - Virtual CAN Interface - Ixxat

VCI - Virtual CAN Interface - Ixxat

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Types and structures• wBusCoupling:[out] Type of bus coupling. The following values are defined for the bus coupling:<strong>CAN</strong>_BUSC_LOWSPEED:The <strong>CAN</strong> controller has a low-speed coupling.<strong>CAN</strong>_BUSC_HIGHSPEED:The <strong>CAN</strong> controller has a high-speed coupling.• dwFeatures:[out] Supported features. The value is a combination of one or more of the followingconstants:<strong>CAN</strong>_FEATURE_STDOREXT:The <strong>CAN</strong> controller supports 11-bit or 29-bit messages, but not both formats simultaneously.<strong>CAN</strong>_FEATURE_STDANDEXT:The <strong>CAN</strong> controller supports 11- and 29-bit messages simultaneously.<strong>CAN</strong>_FEATURE_RMTFRAME:The <strong>CAN</strong> controller supports Remote Transmission Request messages.<strong>CAN</strong>_FEATURE_ERRFRAME:The <strong>CAN</strong> controller returns error messages.<strong>CAN</strong>_FEATURE_BUSLOAD:The <strong>CAN</strong> controller supports calculation of the bus load.<strong>CAN</strong>_FEATURE_IDFILTER:The <strong>CAN</strong> controller allows exact filtering of messages.<strong>CAN</strong>_FEATURE_LISTONLY:The <strong>CAN</strong> controller supports the operating mode “List only”.<strong>CAN</strong>_FEATURE_SCHEDULER:Cyclic transmit list available.<strong>CAN</strong>_FEATURE_GENERRFRM:The <strong>CAN</strong> controller supports the generation of error frames.<strong>CAN</strong>_FEATURE_DELAYEDTX:The <strong>CAN</strong> controller supports delayed transmission of messages.• dwClockFreq:[out] Frequency of primary timers in Hz.• dwTscDivisor:[out] Divisor factor of the time stamp counter. The time stamp counter providesthe time stamp for <strong>CAN</strong> messages. The frequency of the time stampcounter is calculated from the frequency of the primary timer divided by thevalue specified here.• dwCmsDivisor:[out] Divisor factor for the timer of the cyclic transmit list. The frequency of thetimer is calculated from the frequency of the primary timer divided by the valuespecified here. If no cyclic transmit list is available, the field has the value 0.92Copyright IXXAT Automation GmbH C-API Programming Manual, Version 1.5

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!