TK 442/3

More documents

Recommendations

Info

20 5 Axis machining centres OptionalTK 442/3Full automatic protectionThe scope of the full enclosure is to protect the operator against accidental contacts with moving components of the machineand the produced chips and to reduce the noise level.The enclosure is installed on three perimeter sides and on top of the machine, it is made up of insulating and sound-absorbingpanels that can be removed for maintenance operations. It is provided with front shields made up of two frames of extrudedaluminum with transparent shields. In the TWIN mode, it is possible to independently open and close each half of the frontenclosure, by controlling them from the CNC system.
Optional5 Axis machining centresTK 442/321Circular bladeCarbide tipped circular blade that can be used to precisely perform common cutting processes in the 5-axis machining center.It is supplied with different diameters of 250 or 350 mm.Translator carriage for the clamping systemIt can be used only in machines with machinable lengths of 6600 and 8200 mm, operating in TWIN mode. The translatorcarriage is CNC-controlled and enables the operator to rapidly reposition the clamps in the opposite TWIN area during themachine operation. This system allows to improve the productivity of the machining center by minimizing the idle time.
Page 1 and 2: Technical SpecificationTK 442/35 Ax
Page 3 and 4: 5 Axis machining centresTK 442/3TEK
Page 5 and 6: 5 Axis machining centresTK 442/3
Page 7 and 8: 5 Axis machining centresTK 442/3350
Page 9 and 10: 5 Axis machining centresTK 442/3Mac
Page 11 and 12: 5 Axis machining centres11TK 442/3M
Page 13 and 14: 5 Axis machining centres13TK 442/3L
Page 15 and 16: 5 Axis machining centres15TK 442/3M
Page 17 and 18: 5 Axis machining centres17TK 442/3F
Page 19: 5 Axis machining centres19TK 442/3T
Page 23 and 24: Optional5 Axis machining centresTK
Page 25 and 26: Software5 Axis machining centresTK
Page 31 and 32: Optional software5 Axis machining c

TK 442/3

Create successful ePaper yourself

Delete template?

Save as template?