New Products - Chroma Systems Solutions

New ProductsVideo Pattern Generator Model 22294 Fully Comparable with HDMI 1.4 Standard- 3D Format Output- 4Kx2K Graphic Size- Audio Return Channel- sYCC601 / Adobe RGB / Adobe sYCC601- Ethernet Channel- CEC / Deep Color / Lip-Sync / xvYCC Multi ports output test application- HDMI port output x 3- SCART port x 2 330MHz digital (DVI) frequency Support Dual HDCP in DVI test application HDCP ON / OFF IN DVI & HDMI Interface S-Video / CVBS / SCART / RGB / Y.Pb.Pr / Y.Cb.Cr / Y,R-Y,B-Y / D-terminal NTSC / PAL / SECAM signals EDID Read/ Write/Compare Optical / coaxial audio input / output (SPDIF) Support pattern dynamic scrolling HDMI/DVI Hot-Plug function ESD protection circuit PIP & OSD function4 See Page 9-9Spectrocolorimeter Model 71611 Use of spectrophotometric technique Suitable for laboratories and production lines Display luminance, chromaticity and spectral measurement 0.01 cd/m 2 low luminance measurement Wide range of luminance display: 0.01 to 2000 cd/m 2 Highly accurate measurement Up to 9 display modes: xyY, TuvY, u v Y, XYZ, d/Pe, Spectral, Contrast, Program andUser Define Wide view color LCD to facilitate the reading and operation Able to control the Video Pattern Generator and DUT Built-in contrast measurement for contrast ratio calculation Embedded with programmable test items to test the planned items with one key Support USB interface for data control and process Equipped with judgment function for production line to use easily4 See Page 9-323D Optical Profiler Model 7503 Up to 0.1 nm height resolution for measurement Use white light interference measurement technique to do nondestructive and rapidsurface texture measurement and analysis Modulized design to select parts based on test demands or budget concerns Work with color or monochrome camera to do 2D measurement and enable the measuringmicroscope function Equipped with electric nose gear to mount various lens for switch programmatically LED or halogen light source for selection Measurement range 150 mm x150 mm Integrate low magnification lens (5X & 2.5X ratio) for large area 3D measurement Provide various surface measurement parameters, such as sectional difference,included angle, area, dimension, roughness, waviness, film thickness and flatness Powerful STA (Surface Texture Analysis) Master software providing more than 150 lines andsurfaces profiling parameters Automated rapid self calibration to ensure the systems measurement capability Provide measurement script for auto test4 See Page 10-34-5