Power Quality Monitoring

tChapter 5APPsAPP EmaxThe Emax application for Jasic ® devices integrates the maximummonitor functionality and constantly captures all electricalparameters. Smart control algorithms calculate the effectivepower trend and compare it with the fixed target effectivepower. The trend calculation allows the Emax application tointervene in the operational process precisely and to switch offnon-critical consumers temporarily.Depending on the APP or configuration level and FBM modules,up to 64 consumers can be controlled. Power data is captureddirectly via the measurement device current path and voltagepath or via a pulse input.Note for APP Emax: Full functionality for activated Emaxoption (item no 52.16.084).The following Emax APPs are currently available: APP Emax for UMG 604 and UMG 605(item no 51.00.213)The APP contains the peak load switch-off programme(maximum monitor function) for devices UMG 605 andUMG 604. Depending on the hardware configuration,a maximum of 60 switch-off stages may be realised.Name of the APP:EMAX_App_for_UMG604-605 (XX)-Build(X).appFig.: Emax displayt APP Emax for UMG 508 and UMG 511(item no 51.00.214)The APP contains the peak load switch-off programme(maximum monitor function) for devices UMG 508 andUMG 511. Depending on the hardware configuration,a maximum of 64 switch-off stages may be realised.Name of the APP:EMAX_App_for_UMG508-511 (XX)-Build(X).app APP Emax for UMG 604 and UMG 605SPS communication Modbus/Profibus(item no 51.00.215)The APP contains the peak load switch-off programme(maximum monitor function) for devices UMG 604 andUMG 605. The switch-off actions are added to the modbusregister. An additional add-on is required forthe profibus (item no 61.00.217).Name of the APP:EMAX_SPS_GLT_App_for_UMG604-605 (XX)-Build(X).app APP Emax for UMG 508 and UMG 511SPS communication modbus/profibus(item no 51.00.216)The APP contains the peak load switch-off programme(maximum monitor function) for devices UMG 508 andUMG 511. The switch-off actions are added to the modbusregister. An additional add-on is required for the profibusitem no 61.00.217Name of the APP:EMAX_SPS_GLT_App_for_UMG508-511 (XX)-Build(X).appFig.: Emax configuration APP Emax for UMG 604, UMG 605, UMG 508, UMG 511Profibus(item no 51.00.217)The APP installs an Emax profibus profile.Attention: Additionally, an APP Emax GLT/SPS 604/604or APP Emax GLT/SPS 508/511 must be installed separately.Name of the APP:EMAX_Profibus-ADDON(XX)-Build(X).appFor further information concerning the expansion ofEmax: see section 3, peak load optimisation.171