13.07.2015 Views

Power Quality Monitoring

Power Quality Monitoring

Power Quality Monitoring

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

tUMG 104Technical dataNominal voltage 3-phase 4-wire grid (L-N, L-L) 277/480 V AC3-phase 3-wire grid (L-L)480 V ACOvervoltage class300 V CATIIIQuadrants 4Continuous MeasurementyesSampling rate, 8 channels per channel 20 kHzWeight350 gDimensionsW=107.5 mm x D=90 mm x H=82 mmMounting according to IEC EN60999-1/ DIN EN 50022 35 mm DIN railWorking temperature -10…55 °CConnectable wires (U/I) one wire, more wires, fine stranded wires 0.08 - 2.5 mm²cable end sleeve1.5 mm²Protection class according to EN60529 IP 20Measuring rangeVoltage L-N, AC (without PT)Voltage L-L, AC (without PT)Current (Transformer: x/1 und x/5 A)Frequency of fundamentalGridsMeasurement in grids10…300 V AC17…520 V AC0.005...7.5 A45 ..65 HzIT, TN, TT1ph, 2ph, 3 ph, 4 phup to 4 times 1phMeasured valuesVoltage L1, L2, L3, L4, L1-L2, L2-L3, L1-L3 accuracy ±0.2%Current L1, L2, L3, L4, Sum L1-L3, Sum L1-L4 accuracy ±0.2%K-factor L1, L2, L3, L4 yesRotating current components Positive/ Negative/ Zero Phase Sequence yesReal, apparent, reactive power L1, L2, L3, L4, Sum L1-L3, Sum L1-L4 accuracy ±0.4% (EN61557-12)Cos-phi / power factor L1, L2, L3, L4, Sum L1-L3, Sum L1-L4 yesPhase angle L1, L2, L3, L4 yesReal energy (kWh)Reactive energy (Karh)L1, L2, L3, L4, Sum L1-L3, Sum L1-L4:- Consumed real energy (rate 1, rate 2)- Supplied real energy (rate 1, rate 2)L1, L2, L3, L4, Sum L1-L3, Sum L1-L4:- Inductive energy (rate 1, rate 2)- Capacitive reactive energyReactive energy (kVAh) L1, L2, L3, L4, Sum L1-L3, Sum L1-L4 yesWave form voltage L1, L2, L3, L4 yesFrequency of mainsClass 0.5S (…/5 A),Class 1 (…/1 A)Class 2accuracy ±0.01 HzTemperature input accuracy ±1.5%Average valuesMinimum and maximum valuesyesyes<strong>Power</strong> qualityHarmonics, 1st- 40thCurrent, voltage, real/reactive power (±)L1, L2, L3, L4Distortion factor THD-U in % L1, L2, L3, L4 yesDistortion factor THD-I in % L1, L2, L3, L4 yesUnbalancePositive/ Negative/ Zero Phase SequenceInrush-currents 10 ms noMalfunction writerShort-term interruptionsaccuracy V, I Class 1 (EN61000-4-7)yesyesnono22

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!