REFERENCE GUIDE

Create FonteUnderlineeStrikeOuteCharSeteOutputPrecisioneClipPrecisioneQualityBYTE Specifies whether the font is underlined.BYTE Specifies whether characters in the font arestruck out.BYTE Specifies the desired character set. The followingvalues are predefined:• ANSI CHARSET.OEM-CHARSET• SYMBOL CHARSET• The OEM-character set is system-dependent.Fonts with other character sets may exist in the system.If an application uses a font with an unknowncharacter set, it should not attempt to translate orinterpret strings that are to be rendered with that font.Instead, the strings should be passed directly to theoutput device driver.BYTE Specifies the desired output precision. Theoutput precision defines how closely the output mustmatch the requested font's height, width, characterorientation, escapement, and pitch. It can be anyone ofthe following values:• OUT CHARACTER PRECIS• OUT-DEFAULT PRECIS• OUT-STRING PRECIS.OUT=STROKE-='PRECISBYTE Specifies the desired clipping precision. Theclipping precision defines how to clip characters thatare partially outside the clipping region. It can be anyone of the following values:• CLIP CHARACTER PRECIS• CLIP-DEFAULT PRECIS• CLIP =STROKE_PRECISBYTE Specifies the desired output quality. The outputquality defines how carefully GDI must attempt tomatch the logical-font attributes to those of an actualphysical font. It can be anyone of the following values:• DEFAULT_QUALITY• DRAFT_QUALITY• PROOF_QUALITY194 Software development kit