Gold Cup Series - Paks'D

DENISON HYDRAULICSGold Cup Seriespiston pumps for open & closedcircuits zht01Publ.1 - LT3-00010-1-A 7/03Internet: http://www.denisonhydraulics.com E-mail: denison@denisonhydraulics.com

The product information, specifications, and descriptions contained in this publicationhave been compiled for the use and convenience of our customers from informationfurnished by the manufacturer; and we can not, and do not, accept any responsibility forthe accuracy or correctness of any description, calculation, specification, or informationcontained herein. No such description, calculation, specification, or information regardingthe products being sold has been made part of the basis of the bargain, nor has samecreated or amounted to an express warranty that the products would conform thereto. Weare selling the goods and merchandise illustrated and described on this publication on an“as is” basis, and disclaim any implied warranty, including any warranty of merchantabilityor warranty of fitness for any particular purpose whatsoever, with respect to the goodsand merchandise sold. All manufacturer warranties shall be passed on to our customers,but we shall not be responsible for special, indirect, incidental, or consequential damagesresulting from the use of any of the products or information contained or described onthis publication. Further, we reserve the right to revise or otherwise make productimprovements at any time without notification.2

CONTENTSPAGEcontents ................................................................................................................3technical data ......................................................................................................4features .................................................................................................................7description ............................................................................................................8pump, motor dimensionsP6, 7, 8 ........................................................................................................10M6, 7, 8 .......................................................................................................14P11, 14 ........................................................................................................17M11, 14........................................................................................................21P24, 30 ........................................................................................................24M24, 30........................................................................................................29controls dimensions10, 2A ....................................................................................................34, 412H, 4A..........................................................................................................355A, 5C....................................................................................................36, 427D, 7J ..........................................................................................................377F, 7K...........................................................................................................388A, 8C ...................................................................................................39, 419A, 9C ...................................................................................................40, 42**4................................................................................................................43**6, **8, **2 ..................................................................................................44rear adapterstable.............................................................................................................45P6,7,8 ..........................................................................................................46P11,14 .........................................................................................................47P24,30 .........................................................................................................50inlet conditions ....................................................................................................54performance curves ............................................................................................55pump primary displacement control options.......................................................61secondary control options...................................................................................69hydraulic schematics...........................................................................................71pump ordering code............................................................................................76motor ordering code ...........................................................................................803

TECHNICAL DATASeries Terms P6 P7 P8 P11 P14 P24 P30Displacement Max. displacement in 3 /rev. 6.00 7.25 8.00 11.00 14.00 24.60 30.60cm 3 /rev. 98,3 118,8 131,1 180,3 229,5 403,2 501,5Pressure Continuous psi 5000 5000 3600 5000 5000 5000 1) 5000 1)bar 350 350 250 350 350 350 1) 350 1)Intermittent psi 6000 7) 6000 7) 4500 7) 6000 7) 6000 7) 5000 1)7) 5000 1)7)bar 420 7) 420 7) 310 7) 420 7) 420 7) 350 1)7) 350 1)7)Speed (Pump) max. @ full stroke rpm 3000 3000 2100 2400 2400 2100 2) 1800(Motor ) max. @ full stroke rpm 3000 3000 NA 2400 2400 2100 2) 1800(Motor ) max. @ 50% stroke rpm 3600 3600 NA 2800 2800 2100 2) 1800Mounting Flange -2 bolt SAE 127-2 (C) 127-2 (C) 127-2 (C) - - - -Flange -4 bolt (opt. on 6,7 & 8) SAE 152-4 (D) 152-4 (D) 152-4 (D) 165-4 (E) 165-4 (E) 177-4 (F) 177-4 (F)Shaft - keyed SAE 32-1 (C) 32-1 (C) 32-1 (C) 44-1 (E) 44-1 (E) 50-1 (F) 50-1 (F)keyed SAE 44-1 (D) 44-1 (D) 44-1 (D) - - - -Shaft - splined SAE 32-4 (C) 32-4 (C) 32-4 (C) 44-4 (E) 44-4 (E) 50-4(F) 50-4 (F)splined SAE 44-4 (D) 44-4 (D) 44-4 (D) - - - -Weight (Pump) less controls lbs 175-300 175-300 175-300 325-530 325-530 750-835 750-835Mass kg. 80-135 80-135 80-135 145-240 145-240 340-375 340-375Weight (Motor Fixed) lbs 110 110 N/A 250 250 510 600Mass kg. 50 50 N/A 110 110 230 270Weight ( Motor Variable) less controls lbs 110 110 N/A 300 300 650 670Mass kg. 50 50 N/A 135 135 290 300Rotating inertia lbs-in 2 92 92 92 290 290 821 977kg.m 2 0,027 0,027 0,027 0,085 0,085 0,240 0,286Torque (Motor) theo. max. per 100 psi lbs-in 95.5 115.4 NA 175 222 392 487per 100 bar Nm 157 189 NA 287 362 623 797at 5000 psi lbs-in 4774 5769 NA 8750 11100 19576 24351at 350 bar Nm 539,5 651,9 NA 990 1250 2158 2752Power (Motor) theo. max.at 5000 psi, 350 barper 100 rpm hp 7.6 9.2 NA 13.8 17.6 31.1 38.6kW 5,7 6,8 NA 10,3 13,1 23,1 28,8at 2000 rpm hp 151.5 183.1 NA 277.8 353.5 621.3 695kW 113,0 136,6 NA 207,0 263,7 463,5 518,2Torque (Motor) efficiency - approx. stalled % theo. 81 81 NA 81 81 81 81running % theo. 93 93 NA 93 93 93 93Case pressure: max. allowable continuous psi 75 75 75 75 75 75bar 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2intermittent psi 125 125 125 125 125 125 125bar 8,6 8,6 8,6 8,6 8,6 8,6 8,6(Not to exceed 25 psi,1,7 bar above inlet in open circuit units)Flow (Pump) theo.at max.displ.@1500 rpm gpm 39 47 52 71 91 160 199lpm 148 178 197 269 344 606 753@1800 rpm gpm 47 57 62 86 109 192 238lpm 178 216 235 326 413 727 901Displacement (Internal aux. pump) P6,7,8P,S,V P11,14P,S P11,14V P24P P24S 3) P30P P30S 3)in 3 /rev. 1.07 (2) 1.07 4) 1.07 5) 2.81 6) 2.81 6) 2.81 6) 2.81 6)cm 3 /rev. 17,5 (2) 17,5 17,5 46,1 46,1 46,1 46,1Flow (Internal aux. pump) @1500 rpm gpm 6.9 (2) 6.9 6.9 18.2 6.5 18.2 6.5lpm 26,1 (2) 26,1 26,1 68,9 24,6 69,1 24,6@1800 rpm gpm 8.3 (2) 8.3 8.3 21.9 7.8 21.9 7.8lpm 31,4 (2) 31,4 31,4 82,9 29,5 82,9 29,51) Max.pressure 5000 psi, (275 bar) for M24 and 30 series variable motors. Higher servo pressure may be required - consult Denison.2) On HF-1 fluids, 1800 RPM Max. on HF-0 fluids.3) Internal cartridge provides servo flow and must be supercharged from external replenishing flow, from external auxiliary pump.4) One servo cartridge and one replenishing cartridge.5) Servo cartridge only.6) Standard, other sizes available, see ordering code.7) 10% of operation time, not exceeding 6 successive seconds.4

FEATURES123456Quick change valve block - easy toservice or replaceQuick change controls - easy toservice and changeDampened low inertia rocker cam -more stable, quieter and faster thanother designsExclusive zero-backlash rotary servodesign - lifetime accuracyField adjustable compensator override -easily adjusted without removing frommachineryPrecision barrel bearing, a distinctiveDenison Hydraulics feature for over 30years - permits high speeds, highpressure and provides long life101112131415Auxiliary pump can be changed withoutdisassembling the transmissionStandard SAE keyed or splined driveshafts are availableHigh pressure mechanical shaft sealscan be changed without disassemblingthe transmission. Double lip seals are alsoavailableOne piece stroking vane/cam means nolost motion, zero backlash, better control,and no linkages to wear outStroking vane seals are pressure loadedfor longer lifeStandard compensator vent ports allowfor a wide variety of controls (SeeApplications Manual)1718192021Modulated servo pressure saves powerStandard Code 62 SAE split flangeconnectionsConforms to SAE mounting standards.These products are qualified to meetMilitary specifications MIL-P-17869A andMIL-S-901-C Grade AFastest compensator response:Gives maximum of 10% pressureovershoot at rated conditions(guaranteed times under all conditionsfaster response times possibledepending upon application)Variable motors available for multiplespeed ranges or constant power7Versatile controls - can be located oneither side of pump or motor formaximum freedom of design16Rocker cam displacement indicator helpstroubleshoot the system89Patented ring style replenishing checksfastest operation with no sliding poppetsor parts and low pressure dropHot oil shuttle available - fast, reliableoperation18211961112201515172761618310812111372419147

DESCRIPTIONCLOSED HYDRAULIC CIRCUITPOWER CHARACTERISTICS OFHYDROSTATIC TRANSMISSIONSVariable Pump/Fixed Motor. This combination provides for a constant torque outputat a fixed maximum pressure over the full speed range. Speed and direction arecontrolled with a variable displacement over-center pump. Power from overhaulingloads is regenerated back into the pump prime mover. Motor speed is limited to themaximum speed permitted by full pump displacement. System is capable of fullpower only at maximum pump displacement.Variable Pump/Variable Motor. This combination provides for an extended range ofmotor speeds. The motor, at full displacement, delivers maximum torque while itsspeed and direction respond to displacement changes of the crossover center pump.Power is proportional to motor speed.This transmission system has the capability of constant torque and rising power untilthe pump reaches full displacement and full power at elevated speeds as motor displacementand torque are reduced.PACKAGE PUMPPACKAGE MOTOROPEN CIRCUIT PUMPAUXILIARY REAR DRIVEThe package pump contains the circuit elements shown in the hydraulic schematic onpgs. 56-58. These include the axial piston over-center variable displacement pumpwhich controls the speed and direction of the motor, the auxiliary pump which suppliesservo pressure (for controlling the displacement of the variable pump) andreplenishment pressure, the servo pressure relief valve, the replenishment pressurerelief valve and the replenishment check valves for ports A and B. The pumppackage also includes the displacement control valves as well as an external armwhich shows actual displacement. The various control features are described below.The package motor, shown in schematic pgs. 56-58, contains the axial piston fluidmotor, the shuttle valve that continuously removes hot oil from the low pressureside of the loop and a relief valve to establish minimum hydraulic loop pressure at themotor. The fluid motor is available with fixed displacement or with the variable displacementoption. The standard variable motors include an external indicator whichshows displacement.The open circuit pump contains the circuit elements shown on pages 59,60.These include a cross-center variable displacement pump which is normally limitedto one side of center. The auxiliary pump supplies only servo pressure to control themain pump displacement and inlet porting is enlarged to improve the pump’s inletcharacteristics. As the open loop pump operates on one side of center only, not allcontrols are available.Additional auxiliary flow is available with the rear drive pump option. The rear drivemay also be utilized for servo and other purposes.See ordering code for additional detail.“R” & “L” style pumps have no rear shaft seal, so any pump driven must be able towithstand case pressure of the pump driving it.8

DESCRIPTIONAUXILIARY PUMPMOUNTINGINLET PRESSURES,PORTS A & BDRAIN PORTIntegral to the package pump’s envelope is the gerotor auxiliary pump. (P24P, P24S,P30P & P30S have vane integral pump). It provides servo and replenishing pressure.See page 5 for factory settings.NOTE: Auxiliary pump inlet must be connected directly to the reservoir. Customermust supply external line from integral auxiliary pump back into main pump for filteringservo and/or replenishing oil. (see installation drawings starting on pg 10.)The pump or motor is designed to operate in any position. For vertical mounting it isrecommended that the shaft bearing be drained via the drain port provided. Themounting hub and mounting flange are in full conformance with SAE standard. Theshaft must be in alignment with the shaft of the driven load and should be checkedwith a dial indicator. The mounting pad or adapter into which the fluid pump pilots beconcentric with the pump shaft within 0.006 in., 0,152 mm to prevent bearing failure.This concentricity is particularly important if the shaft is rigidly connected to the drivingload without a flexible coupling. The shaft-coupling interface must be lubricated withlithium molydisulfide or similar grease.In a closed hydraulic loop the pump inlet or the fluid motor inlet (during dynamic braking)are supercharged by the integral replenishment system. Consult Denison incases where fluid viscosity or dynamics or line size may cause inlet pressure at eitherport A or B to be less than the 150 psi, 10,3 bar maintained by the integral replenishmentsystem. For operation in open loop or combination open-closed loops, consultDenison.Drain the package pump from the higher drain port. If drain port is above the fluidlevel in the tank install a 5 psi, 0,3 bar relief of suitable size in the drain line to tank.For vertical mounting it is recommended that the shaft bearing be drained via thedrain port provided.For pump speeds intermittently below 1000 rpm, install a back pressure relief40 psi, 2,8 bar of suitable size in the drain line from the higher port to tank.Motor case drain must be connected to pump case.Motor: Drain the motor from the higher drain ports into the lower pump drainport or tank. Make provision that the motor drain port pressure will not exceedthe maximum limits specified above.RETURN LINE FILTERAUXILIARY FLOW FILTERSRelatively inexpensive low pressure filters are recommended for installation inthe return lines and drain lines from circuits using these pumps or motors. Considerthe possibility of decompression surges and intensified flow in cylinder circuitsas well as the factors above in selecting return line filters.It is recommended the auxiliary pump fluid be fully filtered to aid in maintainingacceptable cleanliness levels. For good filtration and reasonable maintenanceintervals the filter capacity must be at least twice the auxiliary pump flow. To usethis feature, install the isolation plug and connect the filter between ports G&H,(P6,P7,P8,P24,P30), or J&K (P11,P14). See detailed schematics and drawingspages 10-19 for location of these ports.NOTE: Auxiliary and return filters must use bypass valves.9

P6-P7-P8F, M DIMENSIONSAL31.50 6000 PSISAE- DIA.(38,1) (414 BARS)4-BOLT FLG. CONN.DRAIN CONN.SAE-12 STR. THD.D1"D" CASE DRAIN CONN.SAE-12 STR. THD..72(18,3)3.00(76,2)3.00(76,2).84(21,3)BA3.12(79,2)1.56(39,6)1.53(38,9)3.06(77,7)AL4L2P*FINSTALLATION DWG. 23-9841-DD2 ALT. DRAIN CONN.SAE-12 STR. THD.L1MOUNTINGSAE 127-2(SAE-C)SAE 152-4(SAE-D)L111.19(284,2)11.59(294,3)L211.06(280,9)11.46(291,1)1.305/8-11UNC x (33,0)4-PLACESL34.90(124,5)5.30(134,6)L4.85(21,6).89(22,6)1.44(36,6)DEEP1.68(42,7)2.00 3000 PSISAE- DIA.(50,8) (207 BARS)4-BOLT FLG. CONN.1.051/2 -13UNC x DEEP(26,7)4-PLACESP*MINSTALLATION DWG. 23-10262-DAL3DRAIN CONN.SAE-12 STR. THD.D15/8-11 UNC-2B TAP x4 PLACES AS SHOWN1.30(33,0)DP.3.12(79.2)1.56(39.6)3.94(99,9).25(6.4).72(18.3)1.44(36.6)A3.94(99,9)L4L2D2 ALT. DRAIN CONN.SAE-12 STR. THD.L1SYSTEM PORT A (FAR SIDE)SYSTEM PORT B (NEAR SIDE)1.50 6000 PSISAE- DIA.(38.1) (418 BARS)4-BOLT FLG. CON4.50(114,3)MOUNTINGSAE 127-2(SAE-C)SAE 152-4(SAE-D)L113.40(340,4)13.80(350,5)L210.14(257,6)10.54(267,7)L34.90(124,5)5.30(134,6)L4.85(21,6).89(22,6)4.50(114,3)10NOTE: See page 16 for shaft information.See pages 45-53 for rear drive information.

P6-P7-P8V, D, P DIMENSIONS(LESS CONTROLS)( )(NEAR SIDE) AUXILIARY PUMP OUTLET GTO EXTERNAL FILTER & SERVO GAGE CONN.SAE-8 STR. THD.H AUXILIARY PUMP (FAR SIDE)FILTER RETURN PORTSAE-8 STR. THD.AL7L3L1ALT. DRAIN CONN.SAE-12 STR. THD.D1K AUXILIARY REPLENISH PORTSAE-16 STR. THD..72(18,3)4.50(114,3)3.00(76,2)4.50(114,3)3.00(76,2).84(21,3)5.27(133,9)3.87TYP.(98,3)1.56(39,6)BA1.53(38,9)3.12(79,2)3.06(77,7)P*VALT. DRAIN CONN. D2SAE-12 STR. THD.INSTALLATION DWG. 23-9704-DP*D & P*PINSTALLATION DWG. 23-9704-DAAL4L7L3L2C AUXILIARY PUMP INLETSAE-16 STR. THD.L1(NEAR SIDE) AUXILIARY PUMP OUTLET GTO EXTERNAL FILTER & SERVO GAGE CONN.SAE-8 STR. THD.3.87(98,3)ALT. DRAIN CONN.SAE-12 STR. THD.D1TYP.L5TABLE 1MOUNTINGSAE 127-2(SAE-C)SAE 152-4(SAE-D)BG THIS SIDEAG FAR SIDEMAIN LOOP GAGE CONN.SAE-6 STR. THD.L115.51(393,9)16.85(427,9)L213.70(348,0)15.04(382,1)3.70(93,9)L37.02(178,3)8.36(212,3)K AUXILIARY REPLENISH PORTSAE-16 STR. THD.3.12(79,2)PORT "A"2.00 3000 PSISAE- DIA.(50,8) (207 bar)4-BOLT FLG. CONNPORT "B"1.50SAE- DIA.(38,1)4-BOLT FLG. CONN1.00(25,4).86(21,8)1.56(39,6)10.64(270,3)11.98(304,3)H AUXILIARY PUMP (FAR SIDE)FILTER RETURN PORTSAE-8 STR. THD.5.27(133,9)L4.72(18,3)L51.44(36,6)6000 PSI(414 bar)L75.15(130,9)6.49(164,8)4.50(114,3)1.68(42,7)1/2-13UNC x 1.054-PLACES(26,7)5/8-11UNC x1.38(35,1) DEEP4-PLACES4.50(114,3)3.00 3.00(76,2)(76,2)B6.0 & 7.25 GOLD CUPA.72(18,3)1.56(39,6)3.12(79,2)3.70(93,9)AL4ALT. DRAIN CONN. D2SAE-12 STR. THD.L2L5C AUXILIARY PUMP INLETSAE-16 STR. THD.BG THIS SIDEAG FAR SIDEMAIN LOOP GAGE CONN.SAE-6 STR. THD.1.44(36,6)SAE-1.50DIA.6000 PSI(38,1) (414 bar)4-BOLT FLG. CONNTYP. PORTS "A" & "B"1.385/8-11UNC x8-PLACES (35,1)1.44(36,6)DEEP11NOTE: See page 16 for shaft information.See appropriate controls mounting starting on page 34.

P6-P7-P8X, R DIMENSIONS(LESS CONTROLS)AL7L3(NEAR SIDE) AUXILIARY PUMP OUTLET GTO EXTERNAL FILTER & SERVO GAGE CONN.SAE-8 STR. THD.L6ALT. DRAIN CONN.SAE-12 STR. THD.D1H AUXILIARY PUMP (FAR SIDE)FILTER RETURN PORTSAE-8 STR. THD.K AUXILIARY REPLENISH ANDPUMP FILTER RETURN PORTSAE-12 STR. THD.SYSTEM PORT A (FAR SIDE)SYSTEM PORT B (NEAR SIDE)SEE DETAIL "A"5.38(136,5)5.38(136,5)5.27(133,9)3.87(98,3).90(23,0).90(23,0)BA3.87(98,3)3.70(93,9)3.38(85,8)RAP*XL4ALT. DRAIN CONN. D2SAE-12 STR. THD.L5L2TABLE 3MOUNTINGSAE 127-2(SAE-C)SAE 152-4(SAE-D)INSTALLATION DWG. 23-9885-DL1L117.27(438,6)18.61(472,6)C AUXILIARY PUMP INLETSAE-16 STR. THD.L2 L3 L4 L5 L615.14 7.02 1.00 10.64 16.58(384,6) (178,3) (25,4) (270,3) (421,2)16.48 8.36 .86 11.98 17.92(418,6) (212,3) (21,8) (304,3) (455,2)L75.15(130,9)6.49(164,8).72(18,3)1.44(36,6)1.56(39,7)SYSTEM PORT A (FAR SIDE)SYSTEM PORT B (NEAR SIDE)SAE-1.50 DIA.(38,1)6000 PSI(414 BARS)4-BOLT FLG. CONNECTION1.315/8 -11UNC-2B THREAD x8-PLACES(33,3)3.13(79,4)DEEPP*RINSTALLATION DWG. 23-9726-DAL1L3L7D1 DRAIN CONN.SAE-12 STR. THD.1.305/8-11 UNC-2B TAP x DP.(33,0)4 PLACES AS SHOWN3.12(79.2)1.56(39.6).72(18.3)1.446.07(36.6)(154,1)3.87(98,3)3.87(98,3).25(6.3)3.70(94,0)SYSTEM PORT A (FAR SIDE)SYSTEM PORT B (NEAR SIDE)TABLE 2MOUNTING1.50SAE- DIA.(38.1)4-BOLT FLG. CON6000 PSI(418 BARS)L1 L2 L3 L4 L5SAE 127-2 15.51 11.88 7.02 1.00 10.64(SAE-C) (393,9) (301,8) (178,3) (25,4) (270,3)L615.14(384,6)L75.15(130,9)AL4L5ALT. DRAIN CONN. D2SAE-12 STR. THD.L2L6SAE 152-4(SAE-D)H SERVO GAGE CONN.SAE-4 STR. THD.REAR ADAPTER16.85(427,9)13.22 8.36 .86 11.98 16.48(335,9) (212,3) (21,8) (304,3) (418,7)6.49(164,8)B1 SYSTEM GAGE CONN.SAE-6 STR. THD.K REPLENISHING PORT INLETSAE-16 STR. THD.4.504.50 G CONTROL PRESSURE INLET(114,3)(114,3)SAE-8 STR. THD.4.50(114,3)A1 SYSTEM GAGE CONN.SAE-6 STR. THD.4.50(114,3)6.02(152,8)12NOTE: See page 16 for shaft information.See pages 45-53 for rear drive information.See appropriate controls mounting starting on page 34.

P6-P7-P8S, L DIMENSIONS(LESS CONTROLS)AL7L3(NEAR SIDE) AUXILIARY PUMP OUTLET GTO EXTERNAL FILTER & SERVO GAGE CONN.SAE-8 STR. THD.L6ALT. DRAIN CONN.SAE-12 STR. THD.D1H AUXILIARY PUMP (FAR SIDE)FILTER RETURN PORTSAE-8 STR. THD."BG" SYS. GAGE (N.S.)"AG" SYS. GAGE (F.S)SAE-6 STR. THD.5.27(133,9)3.87(98,3)SYSTEM PORT A (FAR SIDE)SYSTEM PORT B (NEAR SIDE)SEE DETAIL "A"1.315/8 -11UNC-2B THREAD x8-PLACES(33,3)DEEP3.87(98,3)3.70(93,9).721.44(36,6)(18,3)6.51(165,4)AL4ALT. DRAIN CONN. D2SAE-12 STR. THD.L5L2L1C AUXILIARY PUMP INLETSAE-16 STR. THD.DETAIL "A"1.56(39,7)3.13(79,4)SYSTEM PORTS A & B1.50 6000 PSISAE- DIA.(38,1) (414 BARS)4-BOLT FLG. CONNECTION4.50(114,3)5.38(136,5)TABLE 5MOUNTINGSAE 127-2(SAE-C)SAE 152-4(SAE-D)L119.97 15.14(507,3) (384,6)21.31(541,3)L216.48(418,6)L3 L4 L57.02 1.00 10.64(178,3) (25,4) (270,3)8.36 .86 11.98(212,3) (21,8) (304,3)L616.58(421,2)17.92(455,2)L75.15(130,9)6.49(164,8)4.50(114,3)5.38(136,5)P*SINSTALLATION DWG. 23-10174-D"KA" SHUTTLERELIEF INLETSAE-12 STR. THD."D3" DRAIN CONNECTIONSAE-16 STR. THD.P*LALT. DRAIN CONN.SAE-12 STR. THD.D1INSTALLATION DWG. 23-10133-DAL7L3L5G SERVO PRESSURE INLETSAE-8 STR. THD.K AUXILIARY REPLENISH ANDPUMP FILTER RETURN PORTSAE-12 STR. THD.REAR ADAPTER5.27(133,9)1.443.87TYP.(98,3)(36,6).72(18,3)2.04(51,8)1.56(39,7)3.137.38(79,4)(187,6)L4ALT. DRAIN CONN. D2SAE-12 STR. THD.SYSTEM PORT A (FAR SIDE)SYSTEM PORT B (NEAR SIDE)1.50 6000 PSISAE- DIA.(38,1) (414 BARS)4-BOLT FLG. CONNECTION1.315/8 -11UNC-2B THREAD x8-PLACES(33,3)DEEP4.50(114,3)AL1L2"D3" DRAIN CONNECTIONSAE-16 STR. THD."KA" SHUTTLE RELIEF INLETSAE-12 STR. THD.5.38(136,5)TABLE 4MOUNTINGSAE 127-2(SAE-C)SAE 152-4(SAE-D)L117.58(446,6)18.92(480,6)L215.14(384,6)16.48(418,6)L37.02(178,3)8.36(212,3)L41.00(25,4).86(21,8)L510.58(268,8)11.92(302,8)L616.58(421,2)17.92(455,2)L75.15(130,9)6.49(164,8)5.32(135,1)4.505.32(135,1)(114,3)5.38(136,5)13NOTE: See page 16 for shaft information.See pages 45-53 for rear drive information.See appropriate controls mounting starting on page 34.

M6-M7-M8 F, G, M, N DIMENSIONSM*F & M*GINSTALLATION DWG. 23-9294-DMOUNTINGSAE 127-2(SAE-C)SAE 152-4(SAE-D)L111.19(284,2)11.59(294,3)L2L3L411.06(280,9)11.46(291,1)4.90(124,5)5.30(134,6).85(21,6).89(22,6)AL3DRAIN CONN.SAE-12 STR. THD.D1"D" CASE DRAIN CONN.SAE-12 STR. THD..72(18,3)3.00(76,2)3.00(76,2)BA1.56(39,6)3.12(79,2)4.56(115,8)"M*G" ONLYAL4L2D2 ALT. DRAIN CONN.SAE-12 STR. THD.L11.44(36,6)1.305/8-11UNC x DEEP8-PLACES (33,0)1.50 6000 PSISAE- DIA.(38,1) (418 BARS)4-BOLT FLG. CONNM*M & M*NINSTALLATION DWG. 23-10262-DREAR ADAPTERAL3DRAIN CONN.SAE-12 STR. THD.D11.305/8-11 UNC-2B TAPx(33,0)4 PLACES AS SHOWNDP.3.12(79.2)1.56(39.6)3.94(99,9).25(6.4).72(18.3)1.44(36.6)3.94(99,9)5.67(144,0)"M*N" ONLYPORTS A & B1.50 6000 PSISAE- DIA.(38.1) (418 BARS)4-BOLT FLG. CONAL4D2 ALT. DRAIN CONN.SAE-12 STR. THD.L2L1PORT "A"- FAR SIDEPORT "B"- THIS SIDESEE PORT DETAIL4.50(114,3)MOUNTINGSAE 127-2(SAE-C)SAE 152-4(SAE-D)L1 L2 L3 L413.40(340,4)13.80(350,5)10.14(257,6)10.54(267,7)4.90(124,5)5.30(134,6).85(21,6).89(22,6)4.50(114,3)14NOTE: See page 16 for shaft information.See pages 45-53 for rear drive information.

H1M6-M7-M8 H, V, R, L MOTOR DIMENSIONS(LESS CONTROLS)M*H & M*VINSTALLATION DWG. 23-10029-DAL7L3(LESS CONTROLS)H2 CONTROL PRESSURE INLETSAE-8 STR. THD. (FAR SIDE)ALT. DRAIN CONN.SAE-12 STR. THD.D1TABLE 14MOUNTINGSAE 127-2(SAE-C)SAE 152-4(SAE-D)L113.16(334,3)14.50(368,3)H1 CONTROL PRESSURE INLETSAE-8 STR. THD. (NEAR SIDE).72(18,3)L212.80(325,1)14.14(359,2)L37.02(178,3)8.36(212,3)L41.00(25,4).86(21,8)4.50(114,3)3.00(76,2)L510.58(268,8)11.92(302,8)5.15(130,9)6.49(164,8)D CASE DRAIN PORTSAE-12 STR. THD.3.00(76,2)L74.50(114,3)3.87(98,3)3.87(98,3)1.16(29,5)4.56(115,8)"M*H" ONLY3.12(79,2)1.56(39,6)BAAL4ALT. DRAIN CONN. D2SAE-12 STR. THD.L5L2L11.44(36,6)1.385/8-11UNC x DEEP8-PLACES (35,1)1.50 6000 PSISAE- DIA.(38,1) (414 bar)4-BOLT FLG. CONN2-PLACESM*R & M*LINSTALLATION DWG. 23-10317-DREAR ADAPTERAL7L3D1 DRAIN CONN.SAE-12 STR. THD.1.305/8-11 UNC-2B TAP x(33,0)4 PLACES AS SHOWNDP.3.87(98,3).25(6.3).72(18.3)3.12(79.2)1.56(39.6)3.87(98,3)1.94(49,3)1.44(36.6)AALT. DRAIN CONN. D2SAE-12 STR. THD.5.67(144,0)"M*L" ONLYSYSTEM PORT A (FAR SIDE)SYSTEM PORT B (NEAR SIDE)1.50 6000 PSISAE- DIA.(38.1) (418 BARS)4-BOLT FLG. CONL3L2L1H1 CONTROL PRESSURE INLETSAE-8 STR. THD. (NEAR SIDE)H2 CONTROL PRESSURE INLETSAE-8 STR. THD. (FAR SIDE)4.50(114,3)4.50(114,3)TABLE 13MOUNTINGSAE 127-2(SAE-C)SAE 152-4(SAE-D)L115.14(384,6)16.48(418,7)L211.88(301,8)13.22(335,9)L37.02(178,3)8.36(212,3)L41.00(25,4).86(21,8)L510.36(263,1)11.70(397,2)L75.15(130,9)6.49(164,8)4.50(114,3)4.50(114,3)15NOTE: See page 16 for shaft information.See pages 45-53 for rear drive information.See appropriate controls mounting starting on page 34.

FOR 6-7-8 PUMPS & MOTORSM*F, M*G, M*H, M*V, P*S, P*X, P*D, P*P, P*V & P*F M*R, M*L, M*M, M*N, P*L & P*RS1S2S31.943(49,35).49(12,4).25(6,4)MAX.2.972.9175,473,9( )30˚1.71(43,4).12(3,0)6.0005.998) DIA.152,40( 152,352.76(70,1)SPLINE LENGTHDIA..83(21,1)3.18(80,8).78(M10 x 1.5) METRIC THREAD x(19,8)DEEP4.50(114,3)SHAFT DEGIGNATIONPUMP MODEL CODE042.97/2.91(75,4/73,9)2.64(67,0)30˚.12(3,0)SAE 152-4 ("D" 4 BOLT)SHAFTSAE 32-1(SAE-C)SAE 44-1("D" KEYED)S1S21.19(30,2).438/.437 SQ. KEY x LG.1.75(11,12/11,10)(44,4)SPLINE LENGTHSEE NOTE 11.75001.749444,4544,43DIA.NOTES:1. SPLINE LENGTH ONLY FOR:M*F, M*G, M*H, M*V, P*S, P*X, P*D, P*P, P*V & P*F2. SPLINE LENGTH ONLY FOR:2.23M*R, M*L, M*M, M*N, P*L & P*R2.1556,6( 54,6S1S2S3(S3().49(12,4).24(6,1)(.31(7,9)2.232.1556,654,6).06(1,5)SAE 152-4 ("D" 4 BOLT)SAE 44-4("D" SPLINE)SHAFT DEGIGNATIONPUMP MODEL CODE05x 45˚1.75(44,5)SAE INVOLUTE SPLINE J498-B 1969EXTERNAL CLASS 1 FLAT ROOT SIDE FIT8/16 DIA. PITCH30˚ PRESSURE ANGLE13 TEETH1.7210-1.7160MAJOR DIA(43,713/43,586).09(2,3)SPLINE LENGTHSEE NOTE 26.36(161,6)8.50(215,9)DIA.3.18(80,8)4.44(112,8).78(M10 x 1.5) METRIC THREAD x(19,8).73(18,4)6.36(161,6)8.88(225,6)VIEW A-AFOR SAE 152-4("D" 4-BOLT)DEEP4.50(114,3)1.386(35,20)30˚4.50(114,3)DIA.3.56(90,4)4.22(107,2)1.30(33,0)DIA.MIN.30˚.09(2,3)SAE 127-2 ("C" 2-BOLT)SHAFT DEGIGNATIONPUMP MODEL CODE02 or 0709 or 10SAE 32-1("C" KEYED)SHAFTSAE 32-1(SAE-C)SAE 32-1 LONG(SAE-C)(S12.23/2.15(56,6/54,6)3.36/3.28(85,3/83,3)1.25001.249431,75031,735)DIA.S21.88(47,8)3.01(76,4).312/.310(7,92/7,87).312/.310(7,92/7,87).31(7,9)SAE 127-2 ("C" 2-BOLT)S31.25/1.22SQ. KEY x LG. (31,8/31,0)2.38/2.35SQ. KEY x LG. (60,4/59,7)SAE 32-4("C" SPLINE).06(1,5)x 45˚(5.0004.998127,00126,95DIA.)SHAFT DEGIGNATIONPUMP MODEL CODE03 or 087.12(180,8)SAE INVOLUTE SPLINE J498-B 1969EXTERNAL CLASS 1 FLAT ROOT SIDE FIT12/24 DIA. PITCH30˚ PRESSURE ANGLE14 TEETH1.2293-1.2243MAJOR DIA(31,224/31,097)VIEW A-AFOR SAE 127-2("C" 2-BOLT)4.22(107,2)16

P11-P14 M, F DIMENSIONSB1.12(28.4)6.12(155.4)16.28(413,4)"D1" DRAIN CONN.SAE-16 STR. THD.REAR ADAPTER4.82(122,4)B5.91(150,0)B"D2" ALT. DRAIN CONN.SAE-16 STR. THD.13.60(345,4)1.56(39,7)3.13(79,4)5.94(150,9)5.94(150,9)P*MINSTALLATION DWG. 23-10188-D1.44(36,6).72(18,3)SYSTEM PORT A (FAR SIDE)SYSTEM PORT B (NEAR SIDE)1.50 6000 PSISAE- DIA.(38,1) (414 BARS)4-BOLT FLG. CONNECTION1.315/8 -11UNC-2B THREAD x8-PLACES(33,3)DEEPP*FINSTALLATION DWG. 23-7957-DB1.12(28.4)6.12(155.4)16.51(419,4)15.28(388,0)"D1" ALT. DRAIN CONN.SAE-16 STR. THD.1.315/8-11UNC-2B THREAD x8-PLACES(33,3)1.44.72(18.3)(36.4)3.00(76.2)DEEP3.00(76.2)1.44(36.4).72(18.3)4.82(122,4)BA1.56(39,6)3.12(79,2)4.82(122,4)B"D2" ALT. DRAIN CONN.SAE-16 STR. THD.SAE-1.506000 P.S.I.DIA.(38.1)(414 bar)4-BOLT FLG. CONN. (CODE 62)2-PLACES"D" DRAIN CONNECTIONSAE-16 STR. THD.17NOTE: See page 23 for shaft information.See pages 45-53 for rear drive information.

P11-P14 P, V DIMENSIONS(LESS CONTROLS)B1.12(28,4)L3L1"D1" DRAIN CONN.SAE-16 STR. THD.SAE-1.506000 P.S.I.DIA.(38.1)(415 bar)4-BOLT FLG. CONN. (CODE 62)TYPICAL 2-PLACES.72(18,3)1.44(36,6)3.00(76,2)3.00(76,2)5.17(131,3)5.83(148,0)BA1.56(39,6)3.12(79,2)5.174.91(131,3) (124,7) 5.33(135,3)P*PINSTALLATION DWG. 23-9700-DP*VINSTALLATION DWG. 23-9700-DBBL71.12(28,4)L3L4"D2" ALT. DRAIN CONN.SAE-16 STR. THD.L2L1"D1" DRAIN CONN.SAE-16 STR. THD."C" AUXILIARY PUMP INLETSAE-20 STR. THD.SAE-1.506000 P.S.I.DIA.(38.1)(415 bar)4-BOLT FLG. CONN. (CODE 62)TABLE 6PUMPP11P, P14P&P11V, P14V1.385/8-11UNC-2B x8-PLACES (35,1).72(18,3)L119.83(503,8)DEEP1.44(36,6)5.56 5.56141,3( 141,3 )L218.31(465,2)3.00(76,2)L38.48(215,3)3.25(82,6)L415.25(387,4)2.00(50,8)1.00(25,4)L76.38(162,0)5.835.17 (148,0)(131,3)BA1.56(39,6)3.12(79,2)1.75(44,4)3.50(88,9)5.17(131,3)4.91(124,7)5.33(135,3)BL7L4"D2" ALT. DRAIN CONN.SAE-16 STR. THD.L2"C" AUXILIARY PUMP INLETSAE-20 STR. THD.5/8-11UNC-2B x4-PLACES1.38(35,1)DEEP5.56141,32.50(63,5)2500 PSIDIA.(172 BARS)5.56( 141,3 )1/2-13UNC-2B x4-PLACES4-BOLT FLG.1.19(30,2)DEEP18NOTE: See page 23 for shaft information.See appropriate controls mounting starting on page 34.

P11-P14 S, X DIMENSIONS(LESS CONTROLS)B1.12(28,4)L3L5"D1" DRAIN CONN.SAE-16 STR. THD."K" AUXILIARY REPLENISH ANDPUMP FILTER RETURN PORTSAE-12 STR. THD.3.38(85,8)R5.17(131,3)5.83(148,0).90(23,0).90(23,0)BA5.17(131,3)4.91(124,7)6.51(165,4)BP*SINSTALLATION DWG. 23-9861-DP*XINSTALLATION DWG. 23-9861-DBL71.12(28,4)L3L4L1"D2" ALT. DRAIN CONN.SAE-16 STR. THD.TABLE 7PUMPP*SP*XL5L2L124.58(624,4)21.88(555,7)"D1" DRAIN CONN.SAE-16 STR. THD.L219.75(501,7)"C" AUXILIARY PUMP INLETSAE-20 STR. THD.L38.48(215,3)L415.25(387,4)L521.19(538.3)L76.38(162,0)"K" AUXILIARY REPLENISH ANDPUMP FILTER RETURN PORTSAE-12 STR. THD..72(18,3)1.44(36,6)SYSTEM PORT A (FAR SIDE)SYSTEM PORT B (NEAR SIDE)SAE-1.50(38,1)DIA.6000 PSI(414 BARS)4-BOLT FLG. CONNECTION1.56(39,7)5.38(136,5)5.56141,31.315/8 -11UNC-2B THREAD x8-PLACES(33,3)3.13(79,4)DEEP5.38(136,5)5.56( 141,3 )3.38(85,8)R5.17(131,3)5.83(148,0).90(23,0).90(23,0)BA5.17(131,3)4.91(124,7)5.33(135,3)BL7L4L1"D2" ALT. DRAIN CONN.SAE-16 STR. THD.L2"C" AUXILIARY PUMP INLETSAE-20 STR. THD.5.38(136,5)5.56141,35.38(136,5)5.56( 141,3 )19NOTE: See page 23 for shaft information.See pages 45-53 for rear drive information.See appropriate controls mounting starting on page 34.

P*R & P*LINSTALLATION DWG. 23-10097-DP11-P14 R, L DIMENSIONS(LESS CONTROLS)( )1.44(36,6)1.56(39,7)3.13(79,4)1.315/8 -11UNC-2B THREAD x8-PLACES(33,3)DEEPBTABLE 8PUMPP*R & P*LL118.31(465,2)L215.64(397,1)L38.48(215,3)L418.31(465,2)"D1" DRAIN CONN.SAE-16 STR. THD.L76.38(162,0)EXTERNAL SERVO SUPPLYINLET CONN. "G2"(NEAR & FAR SIDES)SAE-8 STR. THD.L4.725.15(130,8)(18,3)SYSTEM PORT A (FAR SIDE)SYSTEM PORT B (NEAR SIDE)1.50 6000 PSISAE- DIA.(38,1) (414 BARS)4-BOLT FLG. CONNECTIONREAR ADAPTER5.17(131,3)1.73(43,9)5.17(131,3)5.91(150,0)"P*R" ONLYSHOWN IN PHANTOMB1.12(28,4)L7L1L3"D2" ALT. DRAIN CONN.SAE-16 STR. THD.L28.08(205,1)"P*L" ONLYSHOWN"K" AUXILIARY REPLENISH(NEAR & FAR SIDES)SAE-12 STR. THD.SYSTEM PORT B REF.5.56( 141,3)5.94(150,9)5.56( 141,3)5.94(150,9)SYSTEM PORT A REF.20NOTE: See page 23 for shaft information.See pages 45-53 for rear drive information.See appropriate controls mounting starting on page 34.

M11-M14 H, V, F, G DIMENSIONS(LESS CONTROLS)B1.12(28.4)L3L4"D1" ALT. DRAIN CONN.SAE-16 STR. THD.11-14 MOTOR DIMENSIONS(LESS CONTROLS)1.315/8-11 UNC-2B THREAD x DEEP8-PLACES(33,3).72(18.3)1.44(36.4)3.00(76.2)SAE-1.506000 P.S.I.DIA.(38.1)(415 bar)4-BOLT FLG. CONN. (CODE 62)3.00(76.2)2-PLACES1.44(36.4).72(18.3)5.17(131.3)"H1" (NEAR SIDE)"H2" (FAR SIDE)CONTROL PRESSURE INLETSAE-8 STR. THD.2-PLACESBA1.43(36.3)1.56(39,6)3.12(79,2)5.17(131.3)BL7L2M*H & M*VINSTALLATION DWG. 23-9900-D2.75"D2" ALT. DRAIN CONN. (69,8)SAE-16 STR. THD.L1TABLE 15MOTORM11H, M11V&M14H, M14VL117.79(451.9)5.565.56141,3 ( 141,3 )17.32(439.9)8.48(215,3)"D" DRAIN CONNECTIONSAE-12 STR. THD.L2 L3 L414.56(369,9)L76.38(162,0)BM*F & M*GINSTALLATION DWG. 23-7957-D1.12(28.4)6.12(155.4)15.28(388,0)16.51(419,4)"D1" ALT. DRAIN CONN.SAE-16 STR. THD.5/8-11UNC-2B THREAD x8-PLACES.72(18.3)1.44(36.4)1.31(33,3)3.00(76.2)DEEPSAE-1.506000 P.S.I.DIA.(38.1)(414 bar)4-BOLT FLG. CONN. (CODE 62)3.00(76.2)2-PLACES1.44(36.4).72(18.3)4.82(122,4)BA1.56(39,6)3.12(79,2)4.82(122,4)B"D2" ALT. DRAIN CONN.SAE-16 STR. THD.SHUTTLE ("M*G" ONLY)"D" DRAIN CONNECTIONSAE-16 STR. THD.21NOTE: See page 23 for shaft information.See appropriate controls mounting starting on page 34.

M11-M14 M, N, R, L DIMENSIONS(LESS CONTROLS)B1.12(28.4)6.12(155.4)16.28(413,4)"D1" DRAIN CONN.SAE-16 STR. THD.REAR ADAPTER4.82(122,4)BB"D2" ALT. DRAIN CONN.SAE-16 STR. THD.5.91(150,0)"M*M" ONLYSHOWN IN PHANTOM7.72(196,1)"M*N" ONLYSHOWN13.60(345,4)5.94(150,9)5.94(150,9)M*M & M*NINSTALLATION DWG. 23-10188-D1.44(36,6)1.56(39,7)3.13(79,4)5/8-11UNC-2B THREAD x 1.318-PLACES(33,3)DEEPBM*R & M*LINSTALLATION DWG. 23-10330-DALTERNATE EXTERNAL SERVO SUPPLYINLET CONN. "G2"SAE-8 STR. THD."D1" DRAIN CONN.SAE-16 STR. THD.5.15(130,8).72(18,3)SYSTEM PORT A (FAR SIDE)SYSTEM PORT B (NEAR SIDE)1.50 6000 PSISAE- DIA.(38,1) (414 BARS)4-BOLT FLG. CONNECTION5.17(131,3)1.73(43,9)5.17(131,3)5.91(150,0)"M*R" ONLYSHOWN IN PHANTOM7.72B5.56( 141,3 )L71.12(28,4)L3L1L2"D2" ALT. DRAIN CONN.SAE-16 STR. THD.SYSTEM PORT B REF.5.94(150,9)(196,1)"M*L" ONLYSHOWNREAR ADAPTERTABLE 16MOTORM11R, M11L&M14R, M14LL118.31(465,2)L215.64(397,1)L38.48(215,3)L414.56(369,9)L76.38(162,0)5.56( 141,3 )5.94(150,9)SYSTEM PORT A REF.22NOTE: See page 23 for shaft information.See pages 45-53 for rear drive information.See appropriate controls mounting starting on page 34.

FOR 11-14 PUMPS & MOTORSM*F, M*G, M*H, M*V, P*S, P*X, P*P, P*V & P*F M*R, M*L, M*M, M*N, P*L & P*R10.34(262.6)8.84(224.5)5.17(131.3)4.42(112.3)1.50SPLINE LENGTH(38,1) SEE NOTE 12.972.9075,473,7.625.60515,8815,37.36(9.1)2.972.9075,473,71.62SPLINE LENGTH(41,1)SEE NOTE 2S1.09(2,3)S34.42(112.3)8.84(224.5)5.17(131.3)10.34(262.6)6.5006.498165.1165.0DIA..09(2,3)2.75(69.8)DIA..06(1,5)x 45˚30˚NECKSEE NOTE 11.941(49,30)1.75001.749544,4544,43DIA.30˚.81 (20.6) DIA. THRU4-PLACESVIEW B-BNOTES:1. SPLINE LENGTH AND NECK ONLY FOR:M*F, M*G, M*H, M*V, P*S, P*X, P*P, P*V & P*F2. SPLINE LENGTH ONLY FOR:M*R, M*L, M*M, M*N, P*L & P*R(M12 x 1.75) METRIC THREAD x1.18(30,0)DEEPSHAFT DEGIGNATIONPUMP MODEL CODE03 or 08SAE INVOLUTE SPLINE DATA J498B 1969FLAT ROOT SIDE FIT EXTERNAL CLASS 18/16 PITCH30˚ PRESSURE ANGLE13 TEETH1.7210-1.7160MAJOR DIA.(43,713-43,586)SAE 165-4 ("E" 4-BOLT)SAE 44-4("E" SPLINE)SHAFT DEGIGNATIONPUMP MODEL CODE02 or 0709 or 10SAE 165-4 ("E" 4-BOLT)SAE 44-1("E" KEYED)SHAFT S1 S3SAE 44-1(SAE-E)SAE 44-1 LONG(SAE-E)2.97/2.90(75,4/73,7)3.97/3.90(100,8/99,1).437/.435(11,10/11.05).437/.435(11,10/11.05)1.50SQ. KEY x LG.(38,1)2.50SQ. KEY x LG.(63,5)23

P24-P30 M, F DIMENSIONSC10.92(277,5)L2L124-30 PUMP DIMENSIONS"D1" SAE-20 STR. THD.CASE DRAIN.88(22,3)1.75(44,4)3.82(97,0)1.91(48,5)3/4-10UNC x8-PLACES1.50DEEP(38,1)7.31(185,7)6.18(157,0)SYSTEM PORT A (FAR SIDE)SYSTEM PORT B (NEAR SIDE)2.00 6000 PSISAE- DIA.(50,8) (414 bar)4-BOLT FLG. CONNB6.18(157,0)B G6.44(163,6)6.84K(173,7)7.31(185,7)C1.25(31,7)"D2" SAE-20 STR. THD.CASE DRAIN1.25(31,8)REAR ADAPTER7.86(199,6)6.44(163,6)7.86(199,6)P*MINSTALLATION DWG. 23-10206-DOVERHUNG SUPPORT POINT7/8"-9 UNC x 1.25(31,8)DEEP6.44(163,6)PUMPP24M(SHOWN)P30ML123.33(592,6)24.33(618,0)L218.09(459,4)19.09(484,8)P*FINSTALLATION DWG. 23-9825-D (P24)INSTALLATION DWG. 23-9764-D (P30).88(22,3)1.75(44,4)3.82(97,0)1.91(48,5)3/4-10 UNC x8-PLACES1.50(38,1)DEEPMOTORP24F(SHOWN)P30FL121.61(548,8)22.61(574,2)L220.46(519,6)21.46(545,0)SYSTEM PORTS A & BSAE- 2.00DIA.6000 PSI(50,8) (414 bar)4-BOLT FLG. CONNL1C10.92(277,5)L2"D1" SAE-20 STR. THD.ALTERNATE CASE DRAIN7.86(199,6)4.38(111,2)4.38(111,2)7.86(199,6)7.31(185,7)BA6.18(157,0)6.18(157,0)7.31(185,7)5.52(140.1)"M*F" ONLYSHOWN IN PHANTOM6.81(173,0)"M*G" ONLYSHOWNC"D2" SAE-20 STR. THD.ALTERNATE CASE DRAINCASE DRAIN"D" SAE-16 STR. THD.NOTE: See page 32 for shaft information.24

P24-P30 P DIMENSIONS(LESS CONTROLS)"D1" SAE-20 STR. THD.CASE DRAINL36.44(163,6)1.66(42,2)TABLE 10PUMPP24P(SHOWN)P30PL123.70(602,1)24.70(627,5)L218.08(459,4)19.08(484,7)L316.34(414,9)17.34(440,3)L418.80(477,4)19.80(502,8)L78.14(206,7)6.44(163,6).88(22,3)3.82(97,0)1.91(48,5)1.503/4-10UNC x DEEP(38,1)8-PLACES1.25(31,7)"H1" SAE-12 STR THDPUMP SERVO & REPLEN. SUPPLYINLET FROM EXTERNAL FILTER1.75(44,4)C10.92(277,5)L2L1SYSTEM PORT A (FAR SIDE)SYSTEM PORT B (NEAR SIDE)2.00SAE- DIA.6000 PSI(50,8) (414 bar)4-BOLT FLG. CONN7.316.08(185,7) (154,4)K O P T6.18(157,0)BA6.18(157,0)4.75(120,7)3.26(82,9)GK7.31(185,7)CL7"D2" SAE-20 STR. THD.CASE DRAINL4"G" SAE-12 STR THDAUX. PUMP (SERVO & REPLEN.)OUTLET TO EXTERNAL FILTER45˚7.15(181,6)1.82(46,2)7.15(181,6)"K" SAE-32 STR THDOPTIONAL-REPLEN. PUMP SUPPLY INLET1.061/2 -13UNC x DEEP4-PLACES (26,9)1.53(38,9)3.06(77,7)P*PINSTALLATION DWG. 23-9922-D (P24P)INSTALLATION DWG. 23-9913-D (P30P).84(21,3)1.68(42,7)2.00 3000 PSISAE- DIA.(50,8) (207 bar)4-BOLT FLG. CONNAUX. PUMP (SERVO & REPLEN.) SUPPLY INLET"C"25NOTE: See page 32 for shaft information.See appropriate controls mounting starting on page 34.

P24-P30 X DIMENSIONS(LESS CONTROLS)"D1" SAE-20 STR. THD.CASE DRAINL3REAR ADAPTER6.44(163,6)1.66(42,2)TABLE 11PUMPP24X(SHOWN)P30XL122.83(579,9)23.83(605,3)L218.08(459,4)19.08(484,7)L316.34(414,9)17.34(440,3)L418.80(477,4)19.80(502,8)L78.14(206,7)6.44(163,6).88(22,3)3.82(97,0)1.91(48,5)1.503/4-10UNC x DEEP8-PLACES (38,1)1.25(31,7)"H1" SAE-12 STR THDPUMP SERVO & REPLEN. SUPPLYINLET FROM EXTERNAL FILTER1.75(44,4)C10.92(277,5)L2L1SYSTEM PORT A (FAR SIDE)SYSTEM PORT B (NEAR SIDE)2.00 6000 PSISAE- DIA.(50,8) (414 bar)4-BOLT FLG. CONN7.31(185,7)6.08(154,4)6.18(157,0)GBA6.18(157,0)4.75(120,7)K O P T7.31(185,7)CL7"D2" SAE-20 STR. THD.CASE DRAINL47.15(181,6)7.15(181,6)1.061/2 -13UNC x DEEP4-PLACES (26,9)1.53(38,9)3.06(77,7)P*XINSTALLATION DWG. 23-10368-D.84(21,3)1.68(42,7)2.00 3000 PSISAE- DIA.(50,8) (207 bar)4-BOLT FLG. CONNAUX. PUMP (SERVO & REPLEN.) SUPPLY INLET"C"26NOTE: See page 32 for shaft information.See pages 45-53 for rear drive information.See appropriate controls mounting starting on page 34.

P24-P30 S DIMENSIONS(LESS CONTROLS)L3"D1" SAE-20 STR. THD.CASE DRAINREAR ADAPTER6.44(163,6)1.66(42,2)6.44(163,6).88(22,3)3.82(97,0)1.91(48,5)1.503/4-10UNC x(38,1)8-PLACESDEEP1.25(31,7)"H1" SAE-12 STR THDPUMP SERVO & REPLEN. SUPPLYINLET FROM EXTERNAL FILTER1.75(44,4)C10.92(277,5)L2L1SYSTEM PORT A (FAR SIDE)SYSTEM PORT B (NEAR SIDE)SAE-2.00DIA.6000 PSI(50,8) (414 bar)4-BOLT FLG. CONN7.31(185,7)6.08(154,4)6.18(157,0)GBA6.18(157,0)K O P T7.31(185,7)CL7"D2" SAE-20 STR. THD.CASE DRAIN9.89(251,3)7.15(181,6)7.15(181,6)TABLE 9PUMPP24S(SHOWN)P30SL1 L222.83 18.09(579,9)23.83(459,4)19.09(605,3) (484,8)L316.34(414,9)17.34(440,3)L78.14(206,7)P*S"D3" DRAIN CONNECTIONSAE-16 STR. THD.INSTALLATION DWG. 23-10285-D27NOTE: See page 32 for shaft information.See pages 45-53 for rear drive information.See appropriate controls mounting starting on page 34.

P24-P30 R, L DIMENSIONS(LESS CONTROLS)"D1" SAE-20 STR. THD.CASE DRAINL3REAR ADAPTER6.44(163,6)1.66(42,2)TABLE 12PUMPP24(SHOWN)P30L123.33(592,6)24.33(618,0)L218.08(459,4)19.08(484,7)L316.34(414,9)17.34(440,3)L78.14(206,7)6.44(163,6).88(22,3)3.82(97,0)1.91(48,5)1.503/4-10UNC x DEEP8-PLACES (38,1)1.25(31,7)"H1" SAE-12 STR THDPUMP SERVO & REPLEN. SUPPLYINLET FROM EXTERNAL FILTER1.75(44,4)C10.92(277,5)L2L1SYSTEM PORT A (FAR SIDE)SYSTEM PORT B (NEAR SIDE)2.00 6000 PSISAE- DIA.(50,8) (414 bar)4-BOLT FLG. CONN7.31(185,7)6.08(154,4)6.18(157,0)BBA7.31(185,7)6.18(157,0)B GK7.72(196,2)"P*R" ONLYSHOWN IN PHANTOM9.89(251,3)"P*L" ONLYSHOWN6.44(163,6)CL7"D2" SAE-20 STR. THD.CASE DRAIN7.15(181,6)7.15(181,6)1.25(31,8)OPTIONAL"K" SAE-16 STR THDREPLEN. SUPPLY INLETOVERHUNG SUPPORT POINT1.257/8"-9 UNC x DEEP(31,8)P*R & P*LINSTALLATION DWG. 23-10112-D28NOTE: See page 32 for shaft information.See pages 45-53 for rear drive information.See appropriate controls mounting starting on page 34.

M24-M30 H, V, F, G DIMENSIONS(LESS CONTROLS)24-30 MOTOR DIMENSIONS(LESS CONTROLS)M*H & M*VINSTALLATION DWG. 23-9818-D (M24)INSTALLATION DWG. 23-9765-D (M30).88(22,3)1.75(44,4)3.82(97,0)1.91(48,5)SYSTEM PORTS A & BSAE- 2.00 6000 PSIDIA.(50,8) (414 bar)4-BOLT FLG. CONN1.503/4-10 UNC x DEEP8-PLACES (38,1)TABLE 17MOTORM24(SHOWN)M30L121.61(548,8)22.61(574,2)L220.46(519,6)21.46(545,0)L317.80(452,0)18.80(477,4)L78.14(206,7)L1C10.92(277,5)L2"D1" SAE-20 STR. THD.ALTERNATE CASE DRAIN7.15(181,6)4.38(111,2)4.38(111,2)7.15(181,6)7.31(185,7)BA6.18(157,0)6.18(157,0)2.31(58,7)7.31(185,7)5.45(138,4)"M*V" ONLYSHOWN IN PHANTOM6.81(173,0)"M*H" ONLYSHOWNCL7L3"D2" SAE-20 STR. THD.ALTERNATE CASE DRAINCONTROL PRESSURE INLET"H1" SAE-4 STR THD (NEAR SIDE)"H2" SAE-4 STR THD (FAR SIDE)CASE DRAIN"D" SAE-16 STR. THD.M*F & M*GINSTALLATION DWG. 23-9825-D (M24)INSTALLATION DWG. 23-9764-D (M30)C10.92(277,5)L2L1.88(22,3)1.75(44,4)"D1" SAE-20 STR. THD.ALTERNATE CASE DRAIN3.82(97,0)1.91(48,5)SYSTEM PORTS A & BSAE- 2.00 6000 PSIDIA.(50,8) (414 bar)4-BOLT FLG. CONN1.503/4-10 UNC x DEEP8-PLACES (38,1)MOTORM24(SHOWN)M307.86(199,6)4.38(111,2)L121.61(548,8)22.61(574,2)L220.46(519,6)21.46(545,0)4.38(111,2)7.86(199,6)7.31(185,7)BA6.18(157,0)6.18(157,0)7.31(185,7)5.52(140.1)"M*F" ONLYSHOWN IN PHANTOM6.81(173,0)"M*G" ONLYSHOWNC"D2" SAE-20 STR. THD.ALTERNATE CASE DRAINCASE DRAIN"D" SAE-16 STR. THD.29NOTE: See page 32 for shaft information.See appropriate controls mounting starting on page 34.

M24-M30 M, N DIMENSIONSM*M & M*NINSTALLATION DWG. 23-10206-DPUMPM24(SHOWN)M30L123.33(592,6)24.33(618,0)L218.09(459,4)19.09(484,8)3/4-10UNC x1.50DEEPC10.92(277,5)L2L1"D1" SAE-20 STR. THD.CASE DRAIN.88(22,3)1.75(44,4)8-PLACES (38,1) 3.82(97,0)1.91(48,5)7.31(185,7)6.18(157,0)SYSTEM PORT A (FAR SIDE)SYSTEM PORT B (NEAR SIDE)2.00 6000 PSISAE- DIA.(50,8) (414 bar)4-BOLT FLG. CONNB7.31(185,7)6.18(157,0)B GK6.44(163,6)6.84(173,7)"M*M" ONLYSHOWN IN PHANTOM8.13(206,5)"M*N" ONLYSHOWNC"D2" SAE-20 STR. THD.1.25CASE DRAIN1.25(31,7) (31,8)REAR ADAPTER7.86(199,6)6.44(163,6)7.86 6.44(199,6)(163,6)OVERHUNG SUPPORT POINT1.257/8"-9 UNC x DEEP(31,8)30NOTE: See page 32 for shaft information.See pages 45-53 for rear drive information.

M24-M30 R, L DIMENSIONSM*R & M*LINSTALLATION DWG. 23-10335-DTABLE 18PUMPM24(SHOWN)M30L123.33(592,6)24.33(618,0)L218.09(459,4)19.09(484,8)L78.14(206,7)"H1" SAE-6 STR THD (NEAR SIDE)"H2" SAE-6 STR THD (FAR SIDE)CONTROL PRESSURE INLET1.503/4-10UNC x DEEP8-PLACES (38,1)C10.92(277,5)L2L1"D1" SAE-20 STR. THD.CASE DRAIN2.00(50,7).88(22,3)1.75(44,4)3.82(97,0)1.91(48,5)7.31(185,7)6.18(157,0)SYSTEM PORT A (FAR SIDE)SYSTEM PORT B (NEAR SIDE)2.00 6000 PSISAE- DIA.(50,8) (414 bar)4-BOLT FLG. CONNB7.31(185,7)6.18(157,0)B GK6.44(163,6)6.84(173,7)"M*R" ONLYSHOWN IN PHANTOM8.13(206,5)"M*L" ONLYSHOWNC1.25(31,7)L7"D2" SAE-20 STR. THD.CASE DRAIN1.25(31,8)REAR ADAPTER7.15(181,6)6.44(163,6)7.15(181,6)6.44(163,6)OVERHUNG SUPPORT POINT1.257/8"-9 UNC x DEEP(31,8)31NOTE: See page 32 for shaft information.See pages 45-53 for rear drive information.See appropriate controls mounting starting on page 34.

FOR 24-30 PUMPS & MOTORSM*F, M*G, M*H, M*V, P*S, P*X, P*P & P*F M*R, M*L, M*M, M*N, P*L & P*R1.06DIA. THRU(26,9)2.00DIA. S'FACE (FAR SIDE)(50,8)4 PLACES3.473.4188,186,6.25(6,2).61(15,5)3.473.4188,186,6S1SPLINE LENGTHSEE NOTE 11.75(44,4)2.12(53,8)SPLINE LENGTHSEE NOTE 2S39.75(247,6)SQ.4.87(123,7)TYP.7.0006.998177,80177,75DIA..12(3,0)2.75(69,8)x 45˚DIA..32(8,1)1.999450,8050,782.2182.21256,3456,18DIA..12x 45˚(3,0).06(1,5)x 45˚VIEW C-CNOTES:1. SPLINE LENGTH AND NECK ONLY FOR:M*F, M*G, M*H, M*V, P*S, P*X, P*P & P*F2. SPLINE LENGTH ONLY FOR:M*R, M*L, M*M, M*N, P*L & P*R1.00(M16 x 2) METRIC THREAD x DEEP(25,4)SHAFT DEGIGNATIONPUMP MODEL CODE03 or 08SAE INVOLUTE SPLINE DATA J498-B 1969FLAT ROOT SIDE FIT EXTERNAL CLASS-18/16 PITCH30˚ PRESSURE ANGLE15 TEETH1.9710-1.9660/ (50,063-49,936) MAJOR DIA.SAE 177-4 ("F" 4-BOLT)SAE 50-4("F" SPLINE)SHAFT DEGIGNATIONPUMP MODEL CODE02 or 0709 or 10SHAFTSAE 50-1(SAE-F)SAE 50-1 LONG(SAE-F)SAE 177-4 ("F" 4-BOLT)SAE 50-1("F" KEYED)S13.47/3.41(88,1/86,6)5.35/5.29(135,9/134,4).500/.498(12,70/12.65).500/.498(12,70/12.65)S32.25SQ. KEY x LG.(57,1)4.13SQ. KEY x LG.(104,9)32

GOLD CUP VALVE BLOCKVB INDIVIDUAL ("B" SIDE) COMPENSATOR VENT CONN.SAE-4 STR.THD."V" COMMON COMPENSATOR VENT CONN.SAE-4 STR. THD.VA INDIVIDUAL ("A" SIDE)COMPENSATOR VENT CONN.SAE-4 STR. THD.KG REPLENISHING PRESS. GAGE CONN.SAE-6 STR. THD.ACCESS PORT PILOT RELIEF VALVESAE-3 STR.THD.COMPENSATOR ADJUSTMENT33

PUMP PRIMARY CONTROLS-B- CONTROL MTG. POSITION-A- CONTROL MTG. POSITIONCONTROLOPTIONFIG.PUMPROT.ROTARY SERVOINPUT SHAFT ROTATIONPORT"A"CONTROLOPTIONFIG.PUMPROT.ROTARY SERVOINPUT SHAFT ROTATIONPORT"A""10*"11CWCCWCCWCWINLETINLET"10*"22CWCCWCWCCWINLETINLETSEE ROTARY SERVOSHAFT DETAILL7SEE TABLES 1-18L7SEE TABLES 1-18SEE ROTARY SERVOSHAFT DETAILFOFFOF1.40(35,6)MIN. VOLUME STOP (CW ROT.)SCREW ADJ. (CCW ROT.)FIGURE -1SCREW ADJ. (CW ROT.)MIN. VOLUME STOP (CCW ROT.).251/4-20UNC TAP x DEEP(6,4).32(8,1).45(11,4)FIGURE -21.40(35,6)MIN. VOLUME STOP (CW ROT.)SCREW ADJ. (CCW ROT.)ROYTARY SERVO SHAFT DETAIL.45(11,5)SEE ROTARY SERVOSHAFT DETAILL7SEE TABLES 1-18.513.50813.03( 12.90)MAJOR DIA. KNURL(32 TEETH PER INCH)L7SEE TABLES 1-18SEE ROTARY SERVOSHAFT DETAIL.45(11,5)FOF"Y""X"2.50(63,5)2.50(63,5)"X""Y"FOF1.40(35,6)1.00MAX. VOLUME STOP (CCW ROT.) (25,4)MIN. VOLUME STOP (CW ROT.)CONTROLOPTION"2A*"FIG.11FIGURE -11.00(25,4)-B- CONTROL MTG. POSITIONCONTROL SPRING OFF-SET TO MIN, VOLUMEPRESSURE SIGNAL TO:PUMPROT. 1/8-27 N.P.T.F. 1/8-27 N.P.T.F.PORT "X"PORT "Y"CW MAX. VOL. MIN. VOL.CCWMIN. VOL.MAX. VOL.MIN. VOLUME STOP (CCW ROT.)MAX. VOLUME STOP (CW ROT.)PORT"A"INLETINLETCONTROLOPTION"2A*"FIG.221.00(25,4)1.00(25,4)1.40(35,6)MIN. VOLUME STOP (CCW ROT.)MAX. VOLUME STOP (CW ROT.)FIGURE -2-A- CONTROL MTG. POSITIONCONTROL SPRING OFF-SET TO MIN, VOLUMEPRESSURE SIGNAL TO:PUMPROT.CW1/8-27 N.P.T.F.PORT "X"MIN. VOL.1/8-27 N.P.T.F.PORT "Y"MAX. VOL.CCW MAX. VOL. MIN. VOL.PORT"A"INLETINLET34

PUMP PRIMARY CONTROLS-B- CONTROL MTG. POSITIONCONTROL SPRING OFF-SET TO MIN, VOLUME-A- CONTROL MTG. POSITIONCONTROL SPRING OFF-SET TO MIN, VOLUMECONTROLOPTIONFIG.PUMPROT.PRESSURE SIGNALTO SAE-4STR. THD. PORT:ROTARY SERVOINPUT SHAFTROTATIONPORT"A"PORT"B"CONTROLOPTIONFIG.PUMPROT.PRESSURE SIGNALTO SAE-4STR. THD. PORT:ROTARY SERVOINPUT SHAFTROTATIONPORT"A"PORT"B"1CW"X"CCWINLETOUTLET2CW"Y"CWINLETOUTLET"2H*"111CCWCWCCW"Y""Y""X"CWCWCCWINLET OUTLETOUTLET INLETOUTLET INLET"2H*"222CCWCWCCW"X""X""Y"CCWCCWCWINLET OUTLETOUTLET INLETOUTLET INLETSEE ROTARY SERVOSHAFT DETAILSEE ROTARY SERVOSHAFT DETAIL.47(12,0)L7SEE TABLES 1-18L7SEE TABLES 1-182.47(62,7)"Y"FOF"X""X"FOF"Y"2.47(62,7)1.40(35,6)MAX. VOLUME STOPFIGURE -11.00(25,4)1.00(25,4)TRIMMER ADJ..251/4-20UNC TAP x DEEP(6,4)MAX. VOLUME STOP.32(8,1).45(11,4)1.00(25,4)1.00(25,4)FIGURE -2MAX. VOLUME STOP1.40(35,6)ROYTARY SERVO SHAFT DETAILSEE ROTARY SERVOSHAFT DETAILL7SEE TABLES 1-18.513.50813.03( )MAJOR DIA. KNURL(32 TEETH PER INCH)12.90TRIMMER ADJ.L7SEE TABLES 1-18SEE ROTARY SERVOSHAFT DETAILFOFFOF1.40(35,6)CONTROLOPTION"4A*"MAX. VOLUME STOPFIGURE -1-B- CONTROL MTG. POSITIONCONTROL SPRING OFF-SET TO MIN, VOLUMEFIG.1111PUMPROT.CWCCWCWCCWROTARY SERVOINPUT SHAFTROTATIONCCWCWCWCCWPORT"A"TRIMMER ADJ.PORT"B"INLET OUTLETINLET OUTLETOUTLET INLETOUTLET INLETMAX. VOLUME STOPCONTROLOPTION"4A*"MAX. VOLUME STOPFIGURE -21.40(35,6)-A- CONTROL MTG. POSITIONCONTROL SPRING OFF-SET TO MIN, VOLUMEFIG.2222PUMPROT.CWCCWCWCCWROTARY SERVOINPUT SHAFTROTATIONCWCCWCCWCWPORT"A"INLETINLETOUTLETOUTLETPORT"B"OUTLETOUTLETINLETINLET35

MARYSVILLE , OHIO U.S.A.ASS'Y NO.SERIAL NO.ELEC. RATINGS:L = 1.5 mh MAX.I = 330 ma MAX. V = 10.56 VOLTS D.C. MAX.HAZARDOUS LOCATION SUITABILITY:1. NONINCENDIVE CLASS I, DIVISION 2,GROUPS A, B, C, AND D.2. CLASS II, DIVISION 2, GROUPS F AND G.WARNING- DO NOT DISCONNECTWHILE CIRCUIT IS LIVE UNLESSLOCATION IS KNOWN TO BENONHAZARDOUS.033-91428-B033-91428-BGROUPS A, B, C, AND D.2. CLASS II, DIVISION 2, GROUPS F AND G.ELEC. RATINGS:L = 1.5 mh MAX.V = 10.56 VOLTS D.C. MAX.HAZARDOUS LOCATION SUITABILITY:ASS'Y NO.SERIAL NO.PUMP PRIMARY CONTROLS-B- CONTROL MTG. POSITIONCONTROL SPRING OFF-SET TO MIN, VOLUMEROTARY SERVOCONTROLPORT PORTOPTIONFIG.PUMPINPUT SHAFTROT.ROTATION "A" "B"1 CWCCW INLET OUTLET"5A*" 1 CCWCW INLET OUTLET1 CWCW OUTLET INLET1 CCWCCW OUTLET INLET-A- CONTROL MTG. POSITIONCONTROL SPRING OFF-SET TO MIN, VOLUMEROTARY SERVOCONTROLPUMPPORT PORTOPTIONFIG.INPUT SHAFTROT.ROTATION "A" "B""5A*"22CWCCWCWCCWINLETINLETOUTLETOUTLET22CWCCWCCWCWOUTLETOUTLETINLETINLETNULL ADJ.SCREWSEE ROTARY SERVOSHAFT DETAIL4.10(104,0)L7SEE TABLES 1-18TRIMMER ADJ.MAX. VOLUME STOPL7SEE TABLES 1-18SEE ROTARY SERVOSHAFT DETAIL4.30(109,3)5.02(127,6)LOCATION IS KNOWN TO BENONHAZARDOUS.WARNING- DO NOT DISCONNECTWHILE CIRCUIT IS LIVE UNLESSI = 330 ma MAX.1. NONINCENDIVE CLASS I, DIVISION 2,MARYSVILLE , OHIO U.S.A.5.02(127,6)4.30(109,3)FIGURE -1A B+CURRENT AT FULL DISPL.350 MA. NOM.COIL RESISTANCE25 NOM.WITH ELECTRICAL POLARITY AS SHOWNINPUT SHAFT WILL ROTATE CCWELECTRICAL INPUT(ELECT. RECEPTACLE CONN. 5/8-24UNEF xMATING CONN. HALF, MS3106E-10SL-4S)NULL ADJ.SCREWSEE ROTARY SERVOSHAFT DETAIL4.10(104,0).390MAX.(9,91)L7.59(15,1)MAX. VOLUME STOPINPUT19˚ CCWACW(MECH.STOP)TRIMMER ADJ.OOMAX. VOLUME STOPCCW(MECH.STOP)A+POLARITY19˚ CW"Z" BRAKE ACTUATOR PORTSAE-6 STR. THD..3760.3755(9,550)(9,538)DIA.MANUAL OVERRIDE DETAILTRIMMER ADJ..56(14,2).49(12,5).31(7,9).15(3,8)TO OPERATE, DISCONNECT OILSUPPLY TO STROKERDO NOT EXCEED50in/lbsTORQUE.(6 N.m)MAX. VOLUME STOPL7FIGURE -24.10(104,0)DIA. WITH .20 WIDE FLATSEE ROTARY SERVOSHAFT DETAIL4.30(109,3)NULL ADJ.SCREW.45(11,4)2.47(62,7)L82.47(62,7).45(11,4)4.30(109,3)MAX. VOLUME STOPTRIMMER ADJ.MAX. VOLUME STOP"Z" BRAKE ACTUATOR PORTSAE-6 STR. THD.FIGURE -1 FIGURE -2.59(15,1)4.10(104,0)NULL ADJ.SCREWCONTROLOPTION"5C*"-B- CONTROL MTG. POSITIONCONTROL SPRING OFF-SET TO MIN, VOLUMEFIG.111PUMPROT.1 CWCCWCWCCWROTARY SERVOINPUT SHAFTROTATIONCCWCWCWCCWPORT"A"INLETINLETOUTLETOUTLETPORT"B"OUTLETOUTLETINLETINLETSERIES SIZE L7 L86, 7 & 8(SAE 127-2)6, 7 & 8(SAE 152-4)11 & 1424 & 305.15(130,9)6.49(164,8)6.38(162,0)8.14(206,7)6.20(157,4)6.77(171,9)8.64(219,4)CONTROLOPTION"5C*"-A- CONTROL MTG. POSITIONCONTROL SPRING OFF-SET TO MIN, VOLUMEFIG.ROTARY SERVOPUMPPORT PORTINPUT SHAFTROT.ROTATION "A" "B"2 CWCW INLET OUTLET22CCWCWCCWCCWINLETOUTLETOUTLETINLET2 CCWCW OUTLET INLET36

PUMP PRIMARY CONTROLSCONTROLOPTION"7D*"-B- CONTROL MTG. POSITIONFIG.1111PUMPROT.CWCCWCWCCWIINDICATORROTATIONCCWCWCWCCWPORT"A"INLETINLETOUTLETOUTLETPORT"B"OUTLETOUTLETINLETINLETSERIES SIZE L7 L86, 7 & 8(SAE 127-2)6, 7 & 8(SAE 152-4)11 & 1424 & 305.15(130,9)6.49(164,8)6.38(162,0)8.14(206,7)9.43(239,6)10.00(254,1)11.87(301,5)L95.63(143,1)6.20(157,5)8.07(205,0)CONTROLOPTION"7D*"-A- CONTROL MTG. POSITIONFIG.2222PUMPROT.CWCCWCWCCWIINDICATORROTATIONCWCCWCCWCWPORT"A"INLETINLETOUTLETOUTLETPORT"B"OUTLETOUTLETINLETINLETA-B+"B" OVERRIDETUBEB2PT1AA+B-"A" OVERRIDETUBEL7SERVOVALVE INLETSAE-8 STR. THD.SERVOVALVE INLETSAE-8 STR. THD.L7PUMPROT.SERVOVALVE DIAGRAMSERVOVALVECAM COILPOLARITY PORTINGPORT"A"PORT"B"FOFL9L8CWCWABOVEBELOWA+ or B-A- or B+P---2P---1OUTLETINLETINLETOUTLETMATING CONN.DENISON #721-30004FOFCCWCCWBELOWABOVEA+ or B-A- or B+P---2P---1OUTLETINLETINLETOUTLETFIGURE -1+-DCDC5MA/DC/NOM.FIGURE -2-BB+AA5MA/DC/NOM.SERVOVALVE DIAGRAMCONTROLOPTION"7J*"-B- CONTROL MTG. POSITIONFIG.1111PUMPROT.CWCCWCWCCWENERGIZESOLENOIDBAABIINDICATORROTATIONCCWCWCWPORT"A"INLETINLETOUTLETPORT"B"OUTLETOUTLETINLETCCW OUTLET INLETSERIES SIZE6, 7 & 8(SAE 127-2)6, 7 & 8(SAE 152-4)11 & 1424 & 30L75.15(130,9)6.49(164,8)6.38(162,0)8.14(206,7)L810.63(270,1)11.20(284,5)13.07(332,0)L95.63(143,1)6.20(157,5)8.07(205,0)CONTROLOPTION"7J*"-A- CONTROL MTG. POSITIONENERGIZEFIG.PUMPROT. SOLENOID2 CW A2 CCW B2 CW B2 CCW AIINDICATORROTATIONCWCCWCCWCWPORT PORT"A"INLETINLET"B"OUTLETOUTLETOUTLET INLETOUTLET INLETABABTSOLENOIDAPT4DC01 DIAGRAMSOLENOIDBTL7L7L9L8FOFFOFFIGURE -1EC01 DC2701-00801-8SOL. BSOL. AZ24+Z26-B24+B26-COILS ARE NOT POLARITY SENSITIVESOL.BFIGURE -2D32+24V OUTD14 4-20mASPOOL VALVE FEEDBACKGND B6/Z28/Z30250OHMSSOL.A4DC01 WIRING DIAGRAMFDBK31237

312PUMP PRIMARY CONTROLSCONTROLOPTION"7F*"-B- CONTROL MTG. POSITIONFIG.1111PUMPROT.CWCCWCWCCWROTARY SERVOPORT PORTINPUT SHAFTROTATION "A" "B"CCWCWCWCCWINLETINLETOUTLETOUTLETOUTLETOUTLETINLETINLETSERIES SIZE6, 7 & 8(SAE 127-2)6, 7 & 8(SAE 152-4)11 & 1424 & 30L75.15(130,9)6.49(164,8)6.38(162,0)8.14(206,7)L89.43(239,6)10.00(254,1)11.87(301,5)L95.63(143,1)6.20(157,5)8.07(205,0)MATING CONN.DENISON #721-30004+-+-D D5MA/DC/NOM.C CB B5MA/DC/NOM.A ASERVOVALVE DIAGRAMMANUAL SERVOVALVE SHUT-OFFSHOWN IN OPEN POSITIONCONTROLOPTION"7F*"-A- CONTROL MTG. POSITIONFIG.2222PUMPROT.CWCCWCWCCWROTARY SERVOINPUT SHAFTROTATIONCWCCWCCWCWPORT"A"PORT"B"INLET OUTLETINLET OUTLETOUTLET INLETOUTLET INLETA-B+"B" OVERRIDETUBEBPT2 1AA+B-"A" OVERRIDETUBESEE ROTARY SERVOSHAFT DETAILL7SERVOVALVE INLETSAE-8 STR. THD.TRIMMER ADJ.L7SEE ROTARY SERVOSHAFT DETAILPUMPROT.CAMSERVOVALVE DIAGRAMSERVOVALVECOILPOLARITY PORTINGPORT"A"PORT"B"FOFL9L8CWABOVEA+ or B-P---2OUTLETINLETFOFCWBELOWA- or B+P---1INLETOUTLETCCWCCWBELOWABOVEA+ or B-A- or B+P---2P---1OUTLET INLETINLET OUTLET1.40(35,6)FIGURE -1MAX. VOLUME STOPTRIMMER ADJ.MAX. VOLUME STOP1/4-20UNC TAP x.25(6,4)DEEP.32(8,1)SERVOVALVE INLETSAE-8 STR. THD..45(11,4)MAX. VOLUME STOPFIGURE -21.40(35,6)SERIES SIZE6, 7 & 8(SAE 127-2)6, 7 & 8(SAE 152-4)11 & 14L75.15(130,9)6.49(164,8)6.38(162,0)L810.63(270,1)11.20(284,5)L95.63(143,1)6.20(157,5)MANUAL SERVOVALVE SHUT-OFFSHOWN IN OPEN POSITION.513.50813.03( 12.90)MAJOR DIA. KNURL(32 TEETH PER INCH)ROYTARY SERVO SHAFT DETAILAA BP T4DC01 DIAGRAMB24 & 308.14(206,7)13.07(332,0)8.07(205,0)TSOLENOIDASEE ROTARY SERVOSHAFT DETAILTRIMMER ADJ.SEE ROTARY SERVOSHAFT DETAILSOLENOIDBTL7L7L9L8FOFFOFCONTROLOPTION"7K*"FIG.1111PUMPROT.CWCCWCWCCW1.40(35,6)MAX. VOLUME STOPFIGURE -1-B- CONTROL MTG. POSITIONROTARY SERVOENERGIZEINPUT SHAFTSOLENOID ROTATIONBAABCCWCWCWCCWPORT"A"PORT"B"INLET OUTLETINLET OUTLETOUTLET INLETOUTLET INLETMAX. VOLUME STOPTRIMMER ADJ.EC01 DC2701-00801-8Z24 COILS ARE NOT POLARITY SENSITIVE+SOL. B Z26-B24SOL.+SOL. ABB26-D32+24V OUTD14 4-20mASPOOL VALVE FEEDBACKGND B6/Z28/Z30250SOL.OHMSA4DC01 WIRING DIAGRAMFDBKCONTROLOPTION"7K*"MAX. VOLUME STOPFIGURE -2-A- CONTROL MTG. POSITIONFIG.ROTARY SERVOPUMP ENERGIZEPORT PORTINPUT SHAFTROT. SOLENOID ROTATION "A" "B"2 CW ACW INLET OUTLET2 CCW BCCW INLET OUTLET2 CW BCCW OUTLET INLET2 CCW ACW OUTLET INLET38

PUMP PRIMARY CONTROLS-B- CONTROL MTG. POSITIONCONTROL SPRING OFF-SET TO MIN, VOLUME-A- CONTROL MTG. POSITIONCONTROL SPRING OFF-SET TO MIN, VOLUMECONTROLOPTIONFIG.PUMPROT.PRESSURE SIGNALTO SAE-4STR. THD. PORT:ROTARY SERVOINPUT SHAFTROTATIONPORT"A"PORT"B"CONTROLOPTIONFIG.PUMPROT.PRESSURE SIGNALTO SAE-4STR. THD. PORT:ROTARY SERVOINPUT SHAFTROTATIONPORT"A"PORT"B"1CW"P1"CCWINLETOUTLET2CW"P2"CWINLETOUTLET"8A*"1 CCW11CWCCW"P2""P2""P1"CWCWCCWINLET OUTLETOUTLET INLETOUTLET INLET"8A*" 222CCWCWCCW"P1""P1""P2"CCWCCWCWINLET OUTLETOUTLET INLETOUTLET INLET.54(13,7)SEE ROTARY SERVOSHAFT DETAILL7SEE TABLES 1-18TRIMMER ADJ. LOCKNUTL7SEE TABLES 1-18SEE ROTARY SERVOSHAFT DETAIL.54(13,7)FOF"P2""P1"2.47(62,7)2.47(62,7)"P1""P2"FOF1.49(37,9)MAX. VOLUME STOPFIGURE -11.00(25,4)1.00(25,4)MAX. VOLUME STOPTRIMMER ADJ.1/4-20UNC TAP x.25 DEEP.32(6,4)(8,1).45(11,4)1.00(25,4)1.00(25,4)FIGURE -2MAX. VOLUME STOP1.49(37,9)SEE ROTARY SERVOSHAFT DETAIL.54(13,7)"Z" BRAKE ACTUATOR PORT37 1/2˚ FLARED FITTING9/16-18 UNFL7SEE TABLES 1-18.513.50813.03( 12.90).59(15,1)MAJOR DIA. KNURL(32 TEETH PER INCH)TRIMMER ADJ. LOCKNUTROYTARY SERVO SHAFT DETAIL1.00(25,4)L7SEE TABLES 1-181.00(25,4)SEE ROTARY SERVOSHAFT DETAIL.54(13,7)4.39(111,4)FOF6.20(157,4)"P2""P1"2.47(62,7)2.47(62,7)FOF4.39(111,4)1.49(37,9)CONTROLOPTION"8C*"MAX. VOLUME STOPFIG.1111FIGURE -11.00(25,4)1.00(25,4)-B- CONTROL MTG. POSITIONCONTROL SPRING OFF-SET TO MIN, VOLUMEPRESSURE SIGNAL ROTARY SERVOPUMPTO SAE-4 INPUT SHAFTROT.STR. THD. PORT: ROTATIONCW"P1"CCWCCW"P2"CWCW"P2"CWCCW"P1"CCWMAX. VOLUME STOPTRIMMER ADJ."Z" BRAKE ACTUATOR PORT37 1/2˚ FLARED FITTING9/16-18 UNF.59(15,1)MAX. VOLUME STOPFIGURE -2-A- CONTROL MTG. POSITIONCONTROL SPRING OFF-SET TO MIN, VOLUMEPORT PORTPRESSURE SIGNAL ROTARY SERVOCONTROLFIG.PUMP"A" "B"OPTIONTO SAE-4 INPUT SHAFTROT.STR. THD. PORT: ROTATIONINLET OUTLET2 CW"P2"CWINLET OUTLET"8C*" 2 CCW"P1"CCWOUTLETOUTLETINLETINLET22CWCCW"P1""P2"CCWCW1.49(37,9)PORT"A"PORT"B"INLETINLETOUTLETOUTLETOUTLET INLETOUTLET INLET39

PUMP PRIMARY CONTROLSCONTROLOPTION"9A*"FIG.1111SEE MANUAL OVERRIDESHAFT DETAIL2.67(67,8)-B- CONTROL MTG. POSITIONPUMPROT.CWCCWCWCCWENERGIZESOLENOID"A""B""B""A"L7SEE TABLES 1-18MANUALOVERRIDE SHAFTPORTROTATION "A"OPORT"B"CCW INLET OUTLET2 CW"B"CWCW INLET OUTLET"9A*" 2 CCW"A"CCWCW OUTLET INLET2 CW"A"CCWCCW OUTLET INLET2 CCW"B"CWTRIMMER ADJ. LOCKNUTCONTROLOPTIONFIG.-A- CONTROL MTG. POSITIONPUMPROT.SOL. "B"ENERGIZESOLENOIDL7SEE TABLES 1-18SOL. "A"MANUALOVERRIDE SHAFTPORTROTATION "A"5.12(130,1)SEE MANUAL OVERRIDESHAFT DETAIL3.17(80,5)INLETINLETPORT"B"OUTLETOUTLETOUTLET INLETOUTLET INLET3.17(80,5)5.12(130,1)MAX. VOLUME STOPFIGURE -1SOL. "A"SOL. "B".55(14,0)MAX. VOLUME STOPTRIMMER ADJ..19HEX RECESS x.12DEEP(4,8)(3,0)MANUAL OVERRIDESHAFT DETAILO2.67(67,8)MAX. VOLUME STOPFIGURE -2.54(13,7)2.67(67,8)"Z" BRAKE ACTUATOR PORT37 1/2˚ FLARED FITTING9/16-18 UNFL7SEE TABLES 1-18.59(15,1)TRIMMER ADJ. LOCKNUTSOL. "B"L7SEE TABLES 1-18SOL. "A"3.17(80,5).54(13,7)4.39(111,4)O6.20(157,4)5.12(130,1)5.12(130,1)O4.39(111,4)CONTROLOPTION"9C*"3.17(80,5)SEE MANUAL OVERRIDESHAFT DETAILFIG.SOL. "A"MAX. VOLUME STOPFIGURE -1ENERGIZESOLENOIDSOL. "B"-B- CONTROL MTG. POSITIONPUMPROT.1 CW "A"1 CCW"B"1 CW"B"CCW1 "A"MANUALOVERRIDE SHAFTROTATIONCCWCWCWCCWPORT"A"INLETINLETOUTLETOUTLETOUTLET INLETOUTLET INLETMAX. VOLUME STOPTRIMMER ADJ.PORT"B"CONTROLOPTION"9C*""Z" BRAKE ACTUATOR PORT37 1/2˚ FLARED FITTING9/16-18 UNFFIG.22.59(15,1)FIGURE -22.67(67,8)MAX. VOLUME STOP-A- CONTROL MTG. POSITIONPUMPROT.CWCCW2 CCWENERGIZESOLENOID"B""A"2 CW "A""B"SEE MANUAL OVERRIDESHAFT DETAILMANUALOVERRIDE SHAFTPORT PORTROTATION "A" "B"CW INLET OUTLETCCW INLET OUTLETCCW OUTLET INLETCW OUTLET INLET40

MOTOR PRIMARY CONTROLS-B- CONTROL MTG. POSITIONCONTROL SPRING OFF-SET TO FULL VOLUME-A- CONTROL MTG. POSITIONCONTROL SPRING OFF-SET TO FULL VOLUMECONTROLOPTIONFIG.MOTORROT.PRESSURE SIGNALTO SAE-4STR. THD. PORTP2ROTARY SERVOINPUT SHAFTROTATIONPORT"A"PORT"B"CONTROLOPTIONFIG.MOTORROT.PRESSURE SIGNALTO SAE-4STR. THD. PORTP1ROTARY SERVOINPUT SHAFTROTATIONPORT"A"PORT"B""8A*"11CWCCWFULL SPEEDCWCWINLET OUTLETOUTLET INLET"8A*"22CWCCWFULL SPEEDCCWCCWINLET OUTLETOUTLET INLETSEE ROTARY SERVOSHAFT DETAILTRIMMER ADJ. LOCKNUTSEE ROTARY SERVOSHAFT DETAIL.54(13,7)L7SEE TABLES 1-18TRIMMER ADJ. LOCKNUTL7SEE TABLES 1-18.54(13,7)FOF"P2""P1"2.47(62,7)2.47(62,7)"P1""P2"MIN. VOLUME STOPFOF1.49(37,9)MIN. VOLUME STOPFIGURE -11.001.00 (25,4)(25,4)1/4-20UNC TAP x.25(6,4)MAX. VOLUME STOPTRIMMER ADJ.DEEP.32(8,1).45(11,4)1.00(25,4)1.00(25,4)FIGURE -2MAX. VOLUME STOPTRIMMER ADJ.1.49(37,9)ROYTARY SERVO SHAFT DETAIL.45(11,5)SEE ROTARY SERVOSHAFT DETAILL7SEE TABLES 1-18.513.50813.03( 12.90)MAJOR DIA. KNURL(32 TEETH PER INCH)L7SEE TABLES 1-18SEE ROTARY SERVOSHAFT DETAIL.45(11,5)FOF"Y""X"2.50(63,5)2.50(63,5)"X""Y"FOF1.40(35,6)MIN. VOLUME STOP1.00(25,4)1.00(25,4)MAX. VOLUME STOPMIN. VOLUME STOP1.00(25,4)1.00(25,4)MAX. VOLUME STOP1.40(35,6)FIGURE -1FIGURE -2-B- CONTROL MTG. POSITIONCONTROL SPRING OFF-SET TO FULL VOLUME-A- CONTROL MTG. POSITIONCONTROL SPRING OFF-SET TO FULL VOLUMECONTROLOPTION"2A*"FIG.1MOTORROT.CW1 CCWPRESSURE SIGNAL TO:1/8-27 N.P.T.F.PORT "X"REDUCED SPEED1/8-27 N.P.T.F.PORT "Y"FULL SPEEDPORT"A"INLETOUTLETCONTROLOPTION"2A*"FIG.2MOTORROT.CW2 CCWPRESSURE SIGNAL TO:1/8-27 N.P.T.F.PORT "X"FULL SPEED1/8-27 N.P.T.F.PORT "Y"REDUCED SPEEDPORT"A"INLETOUTLET41

MARYSVILLE , OHIO U.S.A.ASS'Y NO.SERIAL NO.ELEC. RATINGS:L = 1.5 mh MAX.I = 330 ma MAX. V = 10.56 VOLTS D.C. MAX.HAZARDOUS LOCATION SUITABILITY:1. NONINCENDIVE CLASS I, DIVISION 2,GROUPS A, B, C, AND D.2. CLASS II, DIVISION 2, GROUPS F AND G.WARNING- DO NOT DISCONNECTWHILE CIRCUIT IS LIVE UNLESSLOCATION IS KNOWN TO BENONHAZARDOUS.033-91428-B033-91428-BGROUPS A, B, C, AND D.2. CLASS II, DIVISION 2, GROUPS F AND G.ELEC. RATINGS:L = 1.5 mh MAX.V = 10.56 VOLTS D.C. MAX.HAZARDOUS LOCATION SUITABILITY:ASS'Y NO.SERIAL NO.MOTOR PRIMARY CONTROLS-B- CONTROL MTG. POSITIONCONTROL SPRING OFF-SET TO FULL VOLUME-A- CONTROL MTG. POSITIONCONTROL SPRING OFF-SET TO FULL VOLUMECONTROLOPTION"5A*"FIG.11MOTORROT.CWCCWROTARY SERVOINPUT SHAFTCCW ROTATIONREDUCED SPEEDROTARY SERVOINPUT SHAFTCW ROTATIONFULL SPEEDPORT"A"INLETOUTLETPORT"B"OUTLETINLETCONTROLOPTION"5A*"FIG.22MOTORROT.CWCCWROTARY SERVOINPUT SHAFTCCW ROTATIONFULL SPEEDROTARY SERVOINPUT SHAFTCW ROTATIONREDUCED SPEEDPORT"A"INLETOUTLETPORT"B"OUTLETINLETNULL ADJ.SCREWSEE ROTARY SERVOSHAFT DETAIL4.10(104,0)L7SEE TABLES 1-18MAX. VOLUME STOPTRIMMER ADJ.MAX. VOLUME STOPL7SEE TABLES 1-18SEE ROTARY SERVOSHAFT DETAIL4.30(109,3)5.02(127,6)LOCATION IS KNOWN TO BENONHAZARDOUS.WARNING- DO NOT DISCONNECTWHILE CIRCUIT IS LIVE UNLESSI = 330 ma MAX.1. NONINCENDIVE CLASS I, DIVISION 2,MARYSVILLE , OHIO U.S.A.5.02(127,6)FIGURE -119˚ NULLED AT 0 CURRENT(MECH.STOP)6˚ CW(MECH.OSTOP)A O A+POLARITYCONTROLOPTION"9A*"4.30(109,3) TRIMMER ADJ.SEE MANUAL OVERRIDESHAFT DETAIL2.67(67,8)MIN. VOLUME STOPAB+CURRENT AT FULL DISPL.350 MA. NOM.COIL RESISTANCE25 NOM.WITH ELECTRICAL POLARITY AS SHOWNINPUT SHAFT WILL ROTATE CWELECTRICAL INPUT(ELECT. RECEPTACLE CONN. 5/8-24UNEF xMATING CONN. HALF, MS3106E-10SL-4S)-B- CONTROL MTG. POSITIONO.390(9,91).55(14,0)MAX.CONTROL SPRING OFF-SET TO FULL VOLUMEMANUALENERGIZEFIG.MOTORPORT PORTOVERRIDE SHAFTROT. SOLENOIDROTATION "A" "B"1 CWCW INLET OUTLETFULL SPEED1 CCWCW OUTLET INLETMAX. VOL. LOCKNUTL7SEE TABLES 1-18MIN. VOLUME STOP.3760.3755(9,550)(9,538)MANUAL OVERRIDESHAFT DETAILDIA..56(14,2).49(12,5)FIGURE -2.15.31(7,9)DIA. WITH.20 WIDE FLAT5.12(130,1)4.10(104,0)NULL ADJ.SCREW(3,8)MANUAL OVERRIDE DETAIL-A- CONTROL MTG. POSITIONCONTROL SPRING OFF-SET TO FULL VOLUMEMANUALCONTROLMOTOR ENERGIZEPORT PORTOPTIONFIG.OVERRIDE SHAFTROT. SOLENOIDROTATION "A" "B"2 CWCCW INLET OUTLET"9A*"FULL SPEED2 CCWCCW OUTLET INLETL7SEE MANUAL OVERRIDESEE TABLES 1-18SHAFT DETAIL.19 HEX RECESS x 3.17(4,8) .12DEEP(80,5)(3,0)3.17(80,5)5.12(130,1)MIN. VOLUME STOPMAX. VOLUME STOPMIN. VOLUME STOPMAX. VOL. LOCKNUTFIGURE -1 FIGURE -2O2.67(67,8)MAX. VOLUME STOP42

PUMP SECONDARY CONTROLCONTROLOPTION"**4"-A- CONTROL MTG. POSITIONFIG.3113PUMPROT.CWCCWCCWCWINPUT SHAFTROTATIONCWCCWCWCCWL7PORT"A"INLETINLETOUTLETOUTLETPORT"B"OUTLETOUTLETINLETINLETTORQUELIMITERADJ.EFEFSERIES SIZE6, 7 & 8(SAE 127-2)6, 7 & 8(SAE 152-4)11 & 1424 & 30"F" TORQUE LIMITERADJUSTMENT SCREWL75.15(130,9)6.49(164,8)6.38 5.83(162,0) (148,0)8.14(206,7)L106.20(157,4)7.15(181,6)L116.48(164,5)5.83(148,0)7.15(181,6)"E" TORQUE LIMITERADJUSTMENT SCREWCONTROLOPTION"**4"-B- CONTROL MTG. POSITIONFIG.4 CW CCW INLET224PUMP INPUT SHAFT PORTROT. ROTATION "A"CCWCCWCWCWCCWCWL7INLETOUTLETOUTLETPORT"B"OUTLETOUTLETINLETINLETTORQUELIMITERADJ.FEFEFOFL10L114.97(126,2)FOF1.40(35,5)FIGURE -1"E" TORQUE LIMITERADJUSTMENT SCREW"F" TORQUE LIMITERADJUSTMENT SCREWFIGURE -21.40(35,5)"F" TORQUE LIMITERADJUSTMENT SCREW"E" TORQUE LIMITERADJUSTMENT SCREWL7L7FOFL11L104.97(126,2)FOF1.40(35,5)FIGURE -3"E" TORQUE LIMITERADJUSTMENT SCREW"F" TORQUE LIMITERADJUSTMENT SCREWFIGURE -41.40(35,5)43

P/NPUMP & MOTOR SECONDARY CONTROLSCONTROLOPTION-A- CONTROL MTG. POSITIONFIG.PUMPROT.INPUT SHAFTROTATIONPORT"A"PORT"B"CONTROLOPTION-B- CONTROL MTG. POSITIONFIG.PUMPROT.INPUT SHAFTROTATIONPORT"A"PORT"B""**6"or"**8"2222CWCCWCWCCWCWCCWCCWCWINLET OUTLETINLET OUTLETOUTLET INLETOUTLET INLET"**6"or"**8"1111CWCCWCWCCWCCWCWCWCCWINLET OUTLETINLET OUTLETOUTLET INLETOUTLET INLETL7SEE TABLES 1-18L7SEE TABLES 1-18F"**6""**8"3.76(95,5)4.15(105,4)MATING CONN.DENISON #721-30059MATING CONN.DENISON #721-30059REDB B+15VDCFIGURE -2 RED8 D D FIGURE -1+15VDCOUTCOMMON-15VDCBLUEGREENBLACKCFDCFDOUT-15VDC47BL2WHGNC CB BF F3.76(95,5)4.15(105,4)"**6""**8"DC RVDT DIAGRAM("**8" REF.)POTENTIOMETER DIAGRAM("**6" REF.)CONTROLOPTION-A- CONTROL MTG. POSITIONFIG.PUMPROT.INPUT SHAFTROTATIONPORT"A"PORT"B"CONTROLOPTION-B- CONTROL MTG. POSITIONFIG.PUMPROT.INPUT SHAFTROTATIONPORT"A"PORT"B"2CWCWINLETOUTLET1CWCCWINLETOUTLET"**2"222CCWCWCCWCCWCCWCWINLET OUTLETOUTLET INLETOUTLET INLET"**2"111CCWCWCCWCWCWCCWINLET OUTLETOUTLET INLETOUTLET INLETL7SEE TABLES 1-18L7SEE TABLES 1-18OOFMARYSVILLE, OHIO 43040 USAELECTROHYDRAULIC SYSTEMSS/NMARYSVILLE, OHIO 43040 USAELECTROHYDRAULIC SYSTEMSP/N S/NFOFCFFFOF1.40(35,5)FIGURE -2 FIGURE -11.40(35,5)44

REAR ADAPTERSRear drives ..............................................................................................................(P6P-02R1C-8A2-A00-0B1-M2SAEMounting & CouplingMounting None / plugged 82-2 (A) 101-2 (B) 101-4 (B) 127-2 (C) 127-4 (C) 152-4 (D) 165-4 (E) 177-4 (F)coupling 16-4 (A) 22-4 (B) 22-4 (B) 32-4 (C) 32-4 (C) 44-4 (D) 44-4 (E) 50-4 (F)P6,7,8 0 A B - - - - - -P6,7,8 R,L 0 A B - C - - - -P11,14 0 A B - - - - - -P11,14 R,L 0 A B - C C D E -P24,30 0 - B - C - - - -P24,30 R,L 0 - B B C C D E F45

6,7,8 REAR ADAPTERSP6-14 S,XSAE 82-2 (A) WITH COUPLING 16-4SAE 101-2 (B) WITH COUPLING 22-4M6,7 R,L,M,NP6,7,8 R,L,MSAE 127-2 (C) WITH COUPLING 32-4SAE 101-2 (B) WITH COUPLING 22-4SAE 82-2 (A) WITH COUPLING 16-4SAE-"A" INTERNAL SPLINE DATAFLAT ROOT SIDE FIT J498B9 TEETH16-32 PITCH30˚ PRESSURE ANGLE.6360-.6250MAJOR DIA.(16,154-15,875).5139-.5089MINOR DIA.(13,053-12,926)SAE "A"AUX. MTG.2.40(61,0).29(7,4).39(9,9)MIN.1.38(34,9)MIN.2.09(53,1)3.2513.25382,5882,63SPLINE LENGTH.14(3,6)X 45˚DIA.4.19(106,4).753/8 -16 UNC-2B TAP x2 PLACES AS SHOWN (19,0) DP.SAE-"B" INTERNAL SPLINE DATAFLAT ROOT SIDE FIT J498B13 TEETH16-32 PITCH30˚ PRESSURE ANGLE.8860-.8750MAJOR DIA.(22,504-22,225 ).7583-.7533MINOR DIA.(19,261-19,134)SAE "B"AUX. MTG.2.40(61,0).40(10,2).39(9,9)MIN.1.38(34,9)MIN.2.24.08(56,9)X 45˚(2,0)SAE-C INTERNAL SPLINE DATAFLAT ROOT SIDE FIT (J498B)14 TEETH12-24 PITCH30˚ PRESSURE ANGLE2.881.2500-1.2630MAJOR DIAMETER(73,0)(31.750-32.080)1.0862-1.0912MINOR DIAMETER4.002(27.589-27.716)4.006DIA.101,65 5.75101,75(146,0)1.00SAE "C"1/2 -13 UNC-2B TAP x(25.4) DP. 2 PLACES AS SHOWNAUX. MTG.SPLINE LENGTHSPLINE LENGTH1.32(33,5)MIN..53(13.5)5.0025.006127.05127.153.56(90,4)DIA..74MIN.(18,8).08(2.0)7.12(180,8)x45˚5/8 -11 UNC-2B TAP x2 PLACES AS SHOWN1.00(25.4)DP.SAE 82-2 (A) SAE 101-2 (B) SAE 127-2 (C)46

11,14 REAR ADAPTERSM11,14 R,L,M,NP11,14 R,LBLANKING PLATEM11,14 R,L,M,NP11,14 R,LSAE 82-2 (A) WITH COUPLING 16-447

11,14 REAR ADAPTERSM11,14 R,L,M,NP11,14 R,LSAE 101-2 (B) WITH COUPLING 22-4SAE 101-4 (B) WITH COUPLING 22-4M11,14 R,L,M,NP11,14 R,LSAE 127-2 (C) WITH COUPLING 32-4SAE 127-4 (C) WITH COUPLING 32-448

11,14 REAR ADAPTERSM11,14 R,L,M,NP11,14 R,LSAE 152-4 (D) WITH COUPLING 44-4M11,14 R,L,M,NP11,14 R,LSAE 165-4 (E) WITH COUPLING 44-41.06(26.9)3.50(88.9)3.50(88.9)49

P24, 30 REAR ADAPTERSP24,30 P,S,XSAE 101-2 (B) WITH COUPLING 22-41.8246,23.2682,83.2682,81.8246,2P24,30 P,S,XSAE 127-2 (C) WITH COUPLING 32-4SAE 127-4 (C) WITH COUPLING 32-41.8246,23.2682,83.2682,81.8246,250

24,30 REAR ADAPTERSM24,30 R,L,M,NP24,30 R,LBLANKING PLATE7/8"-9 UNC X1.25 (31,8) DP.OVERHUNG SUPPORTFITTING.67(17.1)M24,30 R,L,M,NP24,30 R,LSAE 101-2 (B) WITH COUPLING 22-4SAE 101-4 (B) WITH COUPLING 22-4.44( 11,2)2 BOLT MOUNT1/2 -13 UNC X 1.00 DP.(25,4)AS SHOWN2.875( 73,02 )5.750( 146,05)SAE 22-4 ("B")SAE 22-4 INTERNAL INVOLUTE SPLINE DATAPER J498b 1969FLAT ROOT SIDE FIT CLASS-116/32 PITCH30˚ PRESSURE ANGLE13 TEETH.7583-.7533 (19,261-19,134) MINOR DIA.30 ˚4.0044.002101,69101,67( )DIA.4.21(107,0)DIA7/8"-9 UNC X1.25 (31,8) DP.OVERHUNG SUPPORTFITTINGSEALING "O" RINGARP - 15545˚( )2.52 17,0(64,0)MIN..52.6713,2SAE 101-2 ("B" 2 BOLT)SAE 101-4 ("B" 4 BOLT)4 BOLT MOUNT1/2 -13 UNC X 1.00 DP.(25,4)ON 5.000 BOLT CIRCLE(127,00)EQUALLY SPACED51

24, 30 REAR ADAPTERSM24,30 R,L,M,NP24,30 R,LSAE 127-2 (C) WITH COUPLING 32-4SAE 127-4 (C) WITH COUPLING 32-41.31(33,3)45˚.53( 13,5 )2 BOLT MOUNT5/8 -11 UNC X 1.25 DP.(31,8)ON 7.125 BOLT CIRCLE(180,98)AS SHOWN90˚30˚7/8"-9 UNC X1.25 (31,8) DP.OVERHUNG SUPPORTFITTING5.0045.002127.09127.07( ) DIA.SEALING "O" RINGARP - 1595.21(132,4)DIA4 BOLT MOUNT1/2 -13 UNC X 1.00 DP.(25,4)ON 6.375 BOLT CIRCLE(161,93)EQUALLY SPACED3.82( 97,0).54.71( )13,718,0SAE 127-2 ("C" 2 BOLT)SAE 127-4 ("C" 4 BOLT)SAE 32-4 ("C")SAE 32-4 INTERNAL INVOLUTE SPLINE DATAPER J498b 1969FLAT ROOT SIDE FIT CLASS-112/24 PITCH30˚ PRESSURE ANGLE1.0912-1.0862 (27,716-27,589) MINOR DIA.M24,30 R,L,M,NP24,30 R,LSAE 152-4 (D) WITH COUPLING 44-41.31(33,3).50( 12,7 )30˚6.0046.002DIA.152.46( 152.44 )8 BOLT MOUNT3/4 -10 UNC THRU (1.31 DEEP REF.)ON 9.000 BOLT CIRCLE(228,60)8 PLACES - EQUALLY SPACEDAS SHOWN6.21(157,8)DIA7/8"-9 UNC X1.25 (31,8) DP.OVERHUNG SUPPORTFITTINGSEALING "O" RINGARP - 163SAE 44-4 ("D" & "E")SAE 44-4 INTERNAL INVOLUTE SPLINE DATAPER J498b 1969FLAT ROOT SIDE FIT CLASS-18/16 PITCH30˚ PRESSURE ANGLE13 TEETH1.5110-1.5060 (38,379-38,252) MINOR DIA.3.82( 97,0 ).54.71( )13,718,0SAE 152-4 ("D" 4 BOLT)52

24, 30 REAR ADAPTERSM24,30 R,L,M,NP24,30 R,LSAE 165-4 (E) WITH COUPLING 44-41.31(33,3).64( 16,3 )4 BOLT MOUNT3/4-10 UNC THRUON 12.500 BOLT CIRCLE(317,50)4 PLACES - EQUALLY SPACED16.52(419,6)DIA30˚6.5046.502165.14( )165.12DIA.6.71(170,6)DIA7/8"-9 UNC X1.25 (31,8) DP.OVERHUNG SUPPORTFITTINGSEALING "O" RINGARP - 1653.82( 97,0 ).54.71( ) SAE 165-4 ("E" 4 BOLT)13,718,0SAE 44-4 ("D" & "E")SAE 44-4 INTERNAL INVOLUTE SPLINE DATAPER J498b 1969FLAT ROOT SIDE FIT CLASS-18/16 PITCH30˚ PRESSURE ANGLE13 TEETH1.5110-1.5060 (38,379-38,252) MINOR DIA.M24,30 R,L,M,NP24,30 R,LSAE 177-4 (F) WITH COUPLING 50-41.31(33,3).64( 16,3)16.52(419,6)DIA4 BOLT MOUNT1" -8 UNC X 1.31 DP.4-PLACES (33,3)30˚9.75( 247,6 )SQUARE7.0017.003( )177,82177,88DIA.7.28(184,9)DIA4.88( 123,8)7/8"-9 UNC X1.25 (31,8) DP.OVERHUNG SUPPORTFITTINGSEALING "O" RINGARP - 1673.82( 97,0).54.71( )13,718,0SAE 177-4 ("F" 4 BOLT)SAE 50-4 ("F")SAE 50-4 INTERNAL INVOLUTE SPLINE DATAPER J498b 1969FLAT ROOT SIDE FIT CLASS-18/16 PITCH30˚ PRESSURE ANGLE15 TEETH1.7524-1.7574 (44,511-44,638) MINOR DIA.53

INLET CONDITIONSAbsolute pressure, PSIA21.720.719.718.717.716.715.714.713.712.711.7INLET CONDITIONS AT SEA LEVEL10.71200 1400 1600 1800 2000 2200 2400Speed, RPMP6V & P6F1.501.431.361.291.221.151.081.010.950.880.810.74Absolute pressure, BarAbsolute pressure, PSIA21.720.719.718.717.716.715.714.713.712.711.7INLET CONDITIONS AT SEA LEVEL10.71200 1400 1600 1800 2000 2200 2400Speed, RPMP7V & P7F1.501.431.361.291.221.151.081.010.950.880.810.74Absolute pressure, BarAbsolute pressure, PSIA21.720.719.718.717.716.715.714.713.712.711.7INLET CONDITIONS AT SEA LEVEL10.71200 1400 1600 1800 2000 2200 2400Speed, RPMP8V & P8F1.501.431.361.291.221.151.081.010.950.880.810.74Absolute pressure, BarAbsolute pressure, PSIA21.720.719.718.717.716.715.714.713.712.711.7INLET CONDITIONS AT SEA LEVEL10.71200 1400 1600 1800 2000 2200 2400Speed, RPMP11V1.501.431.361.291.221.151.081.010.950.880.810.74Absolute pressure, BarAbsolute pressure, PSIA21.720.719.718.717.716.715.714.713.712.711.7INLET CONDITIONS AT SEA LEVEL10.71200 1400 1600 1800 2000 2200 2400Speed, RPMP14V1.501.431.361.291.221.151.081.010.950.880.810.74Absolute pressure, BarNote: The absolute inlet pressure is the pressure required to fill the pump with petroleum based fluids. The maximum pressure in the inlet port is 200psi, 14 bar. For unboosted systems, the diameter of the suction line must be sized to allow a maximum velocity not higher than 4 ft/sec. A coarsescreen may be considered in the suction line, no filter. For water in oil invert emulsions and water glycols increase the inlet absolute pressure by 25%,for phosphate ester increase the absolute inlet pressure by 35%. Any inlet pressures above atmospheric may increase noise levels and decrease efficienciesnoted in this literature. Please consult your nearest Denison Office for further details.Note: Maximum pressure on inlet port C is 200 psi, 14 bar.Inlet characteristics-auxiliary pump, port CSeries Speed Displacement Pressure absoluterpm in 3 /rev cm 3 /rev psi bar6, 7, 8, 11, 14 1200 1.07 17,5 9.5 0,666, 7, 8, 11, 14 1800 1.07 17,5 9.5 0,666, 7, 8, 11, 14 2400 1.07 17,5 10.5 0,7224, 30 1200 4.84 79,3 9.5 0,6624, 30 1800 4.84 79,3 10.5 0,7254

PERFORMANCE CURVES U.S./METRICPRESSURE - PSIPerformance curves Series 6Pump at full displacementPRESSURE - BARPerformance curves Series 6Pump at full displacementSPEED - RPMPerformance curves Series 6Motor at full displacementSPEED - RPMPerformance curves Series 6Motor at full displacement55

PERFORMANCE CURVES U.S./METRICPRESSURE - PSIPerformance curves Series 7Pump at full displacementPRESSURE - BARPerformance curves Series 7Pump at full displacementSPEED - RPMSPEED - RPMPerformance curves Series 7Motor at full displacementPerformance curves Series 7Motor at full displacement56

PERFORMANCE CURVES U.S./METRICPRESSURE - PSIPerformance curves Series 8Pump at full displacementPRESSURE - PSIPerformance curves Series 8Pump at full displacement57

PERFORMANCE CURVES U.S./METRICPRESSURE - PSIPerformance curves Series 11Pump at full displacementPRESSURE - BARPerformance curves Series 11Pump at full displacementSPEED - RPMSPEED - RPMPerformance curves Series 11Motor at full displacementPerformance curves Series 11Motor at full displacement58

PERFORMANCE CURVES U.S./METRICPRESSURE - PSIPerformance curves Series 14Pump at full displacementPRESSURE - BARPerformance curves Series 14Pump at full displacementSPEED - RPMSPEED - RPMPerformance curves Series 14Motor at full displacementPerformance curves Series 14Motor at full displacement59

PERFORMANCE CURVES U.S./METRIC* PRESSURE - PSI **PRESSURE-BARPRESSURE - BARPerformance curves Series 24Pump at full displacementPerformance curves Series 24Pump at full displacement* PRESSURE - PSI PRESSURE - BAR*Performance curves Series 30Pump at full displacementPerformance curves Series 30Pump at full displacement60

PUMP PRIMARY DISPLACEMENT CONTROL OPTIONSCODE DESCRIPTION HYDRAULIC CIRCUITTO VANE CHAMBERS10 MANUAL SCREW ADJUSTSERVOTO VANE CHAMBERS2ATWO POSITION CONTROLXYSERVOTO VANE CHAMBERS2H3 POSITION CONTROLXYSERVOTO VANE CHAMBERS2M2 POSITION CONTROL WITH4DO1 VALVESERVO61

PUMP PRIMARY DISPLACEMENT CONTROL OPTIONSTYPICAL PERFORMANCECAM ANGLEo19DESCRIPTION OF OPERATIONSpring loaded toward maximum displacement, with an adjustmentscrew to limit the displacement anywhere between 0% and 100%.A minimum volume stop is also supplied so that when the rotaryservo shaft is turned, the displacement can be varied onlybetween the minimum and maximum settings.o19o19SHAFT ROTATIONTorque required to rotate servo shaft: 20 lb-in, 2.56 Nm.o19CAM ANGLE19oHydraulically piloted non-proportionally between adjustable minimumand maximum displacements. The control is spring loadedtoward minimum when used on pumps, to maximum on motors.Servo pressure is switched by an external valve to drive the controlin either direction. When used on motors, the minimum settingcan be set no lower than 30% of maximum.MINMAX19oSERVOSHAFTROTATIONCAM ANGLEo19Hydraulically piloted non-proportionally between an adjustableminimum displacement of 0±5% and two fully adjustable maximumdisplacements, one in either direction, and spring loadedtoward minimum. Servo pressure is switched by an external valveto drive the control in either direction.o1912o193o19SHAFTROTATION19CAM ANGLEoSame as 2A except a 4D01 two position directional valve is mountedto the control. With the solenoid de-energized, the control is springloaded to zero for pumps and to maximum displacement formotors. Energizing the solenoid drives the control toward maximumdisplacement on pumps, minimum on motors. When used onmotors, the minimum settings can be no less than 30% of maximum.19SHAFT ROTATIONo62

PUMP PRIMARY DISPLACEMENT CONTROL OPTIONSCODE DESCRIPTION HYDRAULIC CIRCUITTO VANE CHAMBERS2N3 POSITION CONTROLWITH 4DO1 VALVESERVOTO VANE CHAMBERS40 SPRING CENTEREDROTARY SERVOSERVOTO VANE CHAMBERS4ASPRING CENTERED ROTARYSERVO WITH ADJUSTABLESTOPSSERVOTO VANE CHAMBERS4BSPRING CENTERED ROTARYSERVO WITH AUTOMATICBRAKE AND BYPASSCONTROLSERVOBRAKEREPLENISHING63

PUMP PRIMARY DISPLACEMENT CONTROL OPTIONSTYPICAL PERFORMANCECAM ANGLEo19DESCRIPTION OF OPERATIONSame as 2H except a 4D01 three position directional valve is mountedto the control. With the solenoids de-energized, the control is springloaded to zero. Energizing a solenoid drives the control toward maximumdisplacement in one of the two directions.o1912o193o19SERVO SHAFTROTATIONSTROKE RATEZERO TO MAXIMUMP6,7,8 0.8 SECP11,14 1.5 SECP24, 30 1.8 SECo19CAM ANGLEo19o19o19SHAFT ROTATIONANGLEThe 40 is the basic displacement control for all Goldcup. It is actuatedby a servo shaft that is rotated from 0º - 19º, either side of center. Thisaction opens a unique slide valve to port servo oil to and from the vanechambers that actuate the rocker cam. Vanes, integral to the cam,move the cam so that it follows the rotary servo input shaft motionexactly. When the cam reaches the position equal to that of the inputshaft, the slide valve closes. Any cam motion due to pumping forcesimmediately opens the slide valve to correct the cam position.Springs cause the control to return to zero stroke when no externalforce is applied to the servo shaft. An adjustment is provided to locatethe exact zero position, to prevent machine creep.CAM ANGLEo19The 4A control is the same as the 40, with addition of adjustable maximumvolume stop screws, with locking caps, to limit the control to lessthan 100% displacement. Stops are present on both sides of centerand may be set independently to different settings.o19o19o19SERVO SHAFTROTATION ANGLEThe 4B control is the same as the 4A control, with theaddition of an output port that will provide servo pressureto control a spring applied, pressure released parkingbrake. The control contains anticoincidence functionsthat cause the brake to release immediately uponCAM ANGLEo19application of an on-stroke motion at the rotary servoshaft, and that cause the brake to remain released evenafter the rotary servo shaft is recentered, until the pumprocker cam actually returns to zero, at which time thebrake will set. Additionally, a small bypass is openedbetween the pump A & B ports to bypass any flow that isgenerated if the pump is not exactly zeroed. The bypasscloses whenever the brake is released.BRAKE PRESSURE HIGHBYPASS CLOSEDo19o19SERVO SHAFTROTATION ANGLEo19o19±2 o19 oBRAKE PRESSURE LOWBYPASS OPEN64

PUMP PRIMARY DISPLACEMENT CONTROL OPTIONSCODE DESCRIPTION HYDRAULIC CIRCUITTO VANE CHAMBERS4CSPRING CENTERED BRAKEAND ADJUSTABLE BYPASSCONTROL (AUTOMATICBRAKE CONTROL)SERVOTO VANE CHAMBERS5AELECTRO HYDRAULICCONTROLSERVOTO VANE CHAMBERS8AHYDRAULIC STROKERP2P1SERVO65

PUMP PRIMARY DISPLACEMENT CONTROL OPTIONSTYPICAL PERFORMANCEDESCRIPTION OF OPERATIONCAM ANGLEThis control combines the features of the 4A and 4B controls.See above descriptions.o19o19o19o19SERVO SHAFTROTATION ANGLECAM ANGLEo19The 5A control controls displacement in proportion to an electriccurrent between zero and 350 milliamps. The control is availablewith or without a 10% deadband. Positive polarity drives the controlin one direction, and negative polarity in the other. Adjustablemaximum displacement stops are included. The 5C option, withautomatic brake control, is also available.IMAXIMAXINPUT CURRENTDEADBANDo19CAM ANGLEo19The 8A control controls displacement in proportion to a hydraulicpressure, values listed below. Pressure applied in the P1 port drivesthe pump on stroke in one direction, P2 port in the other.Adjustable maximum displacement stops are included. The 8Coption, with automatic brake control, is also available.P IMAX MAXP IMAXo1966

PUMP PRIMARY DISPLACEMENT CONTROL OPTIONSCODE DESCRIPTION HYDRAULIC CIRCUITTO VANE CHAMBERS9AELECTRIC STROKERSERVOTO VANE CHAMBERSCOMMAND7D67D87F67F8HIGH IQ SERVOVALVECONTROLSERVOCOMPENSATORPILOT(V PORT)FEEDBACK(POTENTIOMETEROR RVDT67

PUMP PRIMARY DISPLACEMENT CONTROL OPTIONSTYPICAL PERFORMANCEDESCRIPTION OF OPERATIONThe 9A control controls displacement in proportion to an electric currentbetween zero and 350 milliamps for the 24 volt version, and up to 650 milliampsfor the 12 volt version. The control signal is a Pulse Width Modulated signal.Current signal to one coil drives the pump in one direction, and to the othercoil in the opposite. Adjustable maximum displacement stops are included.The 9C option, with automatic brake control, is also available.CAM ANGLESpecifications:Hysteresis5% typical, 8% maximumLinearity 8%Response P6,7,8 0.9 seconds, zero to full stroke or backP11,14 1.5 seconds, zero to full stroke or backP24, 30 1.8 seconds, zero to full stroke or backRepeatability 2%Temperature null shift

SECONDARY CONTROL OPTIONSCODE DESCRIPTION HYDRAULIC CIRCUITTO VANE CHAMBERS7J67J87K67K8HIGH IQ4DCO1 CONTROLPROPORTIONALVALVECOMPENSATORPILOT (VPORT)ELECTRONICSCAM POSITIONFEEDBACKCOMMANDTO VANE CHAMBERS--4 TORQUE LIMITER OVERRIDE69

15 0 15 0SECONDARY CONTROL OPTIONSTYPICAL PERFORMANCEDESCRIPTION OF OPERATIONCAM ANGLEo19The 700 controls are high response displacement controls that use proportionaldirectional flow control valves to direct high flow levels to and fromthe vane chambers, in order to achieve high stroke rates on the pump Afeedback potentiometer or RVDT (Rotary Variable Differential Transformer)is used to feed back the rocker cam position to the controlling electronics toachieve stable operation.100%100%COMMANDThe 7J6 control uses a proportional directional control valve and a feedbackpotentiometer for feedback, the 7J8 uses an RVDT.o19The 7K6 control uses proportional directional control valve and a the feedbackpotentiometer, but also has a special valve block with a valve in it toshut off the servovalve, so that control may be taken over by a 4A2 controlalso mounted to the pump as a manual override. The 7K8 is the same,except using an RVDT.Specifications for 7J, 7KP6,7,8 P11,14 P24/30Hysteresis

716,7,8 HYDRAULIC SCHEMATIC (CLOSED CIRCUIT)

7211,14 HYDRAULIC SCHEMATIC (CLOSED CIRCUIT)

7324,30 HYDRAULIC SCHEMATIC (CLOSED CIRCUIT)

6, 7, 8 HYDRAULIC SCHEMATIC (OPEN CIRCUIT)SERIES 6 & 7 INFORMATION3/8"-16 UNC-2A x 1/2" SOC. SETSCREWINSTALLED ONLY IF PORT "G" CONNECTSEXTERNALLY TO PORT "H".PORT "H". INSTALL1/8" PLUG IN PORT "H"PACKAGE PUMPCD1GRECOMMENDEDSTRAINERD2DGFBBG1/2ACONTROLOPTIONSHFAAGRECOMMENDEDEXTERNAL FILTERTHE MAXIMUM PRESSUREDROP IN THE FILTERCIRCUIT SHOULD NOTEXCEED 150 PSI UNDERCOLD START CONDITIONSPLUG ON FACE OF PORT BLOCKA1/2AK2A2AAABVBVKGVAARECOMMENDEDCHECK VALVESERIES 6, 7, 8 OPEN CIRCUIT PUMPpump rotary servo input port portrotation shaft rotation “A” “B”input command “A” side R CW inlet outletL CCW inlet outletinput command “B” side R CCW inlet outletL CW inlet outletNOTES:1. The auxiliary pump inlet must be connected directly to the reservoir. See page 39for main pump and auxiliary pump inlet requirements.2. Case pressure must not exceed inlet pressure by more than 25 psi, 1,7 bar.3. Maximum allowable inlet (port C) pressure: 200 psi, 13,8 bar.4. Filters must use bypass valves.5. Absolute inlet pressure must be increased for the following fluids:a. 25% for water glycolsb. 35% for phosphate esters6. A check valve in the outlet line between the pump and load is highly recommendedwhere hoses, accumulators or other components may decompress when pump isvented by the compensator.74

11,14 HYDRAULIC SCHEMATIC (OPEN CIRCUIT)SERIES 11 & 14 INFORMATIONPACKAGE PUMPCD1GD2RECOMMENDEDSTRAINERDGFBCONTROLOPTIONSFABG1/2AA1/2AK2A2ABG2AAAG2BVBVKGVAARECOMMENDEDCHECK VALVESERIES 11, 14 OPEN CIRCUIT PUMPpump rotary servo input port portrotation shaft rotation “A” “B”input command “A” side R CW inlet outletL CCW inlet outletinput command “B” side R CCW inlet outletL CW inlet outletNOTE:A check valve in the outlet line between the pump and load is highly recommendedwhere hoses, accumulators or other components may decompress when pump isvented by the compensator.75

PUMP ORDERING CODEGold Cup pumpsModel number sheetExample model code:P 11 P -2 R 1 * -40 2 -B 00 -0 B 0PumpPDisplacement6.00 cu.in./rev. (98 cc/rev.) 67.25 cu.in./rev. (119 cc/rev.) 78.00 cu.in./rev. (131 cc/rev.) 811.0 cu.in./rev. (180 cc/rev.) 1114.0 cu.in./rev. (229 cc/rev.) 1424.6 cu.in./rev. (403 cc/rev.) 2430.6 cu.in./rev. (501 cc/rev.) 30TypeFixed displacement, closed circuitFFixed displacement with high torque thru-drive, closed circuitMVariable displacement, closed circuitPVariable displacement with medium torque thru-drive, closed circuitXVariable displacement with medium torque thru-drive & shuttle package, closed circuitSVariable displacement with high torque thru-drive, closed circuitRVariable displacement with high torque thru-drive & shuttle package, closed circuitLVariable displacement, open circuit (for P6, 7, 8, 11, & 14 only)VVariable displacement, open & closed circuit (for P6, 7, & 8 only)DEfficiencyHigh efficiency (for P24 only)HStandard efficiencyleave blankShaftKeyed SAE - mechanical shaft seal (single lip seal on P6/7/8F/M) -2 or -02Splined SAE - mechanical shaft seal (single lip seal on P6/7/8F/M) -3 or -03Keyed SAE-D (mounting & shaft) - mechanical shaft seal (for P6/7/8 only)(single lip seal on P6/7/8F/M) -4 or -04Splined SAE-D (mounting & shaft) - mechanical shaft seal (for P6/7/8 only)(single lip seal on P6/7/8F/M) -5 or -05Keyed SAE - double lip shaft seal -7 or -07Splined SAE - double lip shaft seal -8 or -08Keyed (long) SAE - double lip shaft seal -9 or -09Keyed (long) SAE - mechanical shaft seal -10RotationClockwiseRCounter-clockwiseLSealsNitrile (Buna N) 1EPR (not available when using "5A" or "5C" primary controls)(pump will be unpainted unless otherwise specified) 4Flourocarbon (Viton) 5Design letter(assigned by manufacturer) *Primary controlsNone (for fixed displacement units only)omitScrew adjustment (spring offset to maximum displacement) -10Cylinder control w/ adjustable maximum volume stops -2ACylinder control - 3 position (spring centered with zero adjustment) -2HCylinder control - 2 position electro-hydraulic w/ adjustable maximum volume stop (spring offset to maximum displacement) -2MCylinder control - 3 position (spring centered) electro-hydraulic -2NRotary servo - spring centered -40Rotary servo - spring centered w/ adjustable maximum volume stops -4ARotary servo - spring centered w/ automatic brake control -4BRotary servo - spring centered w/ adjustable maximum volume stops & automatic brake control -4CElectro-hydraulic stroker w/ adjustable maximum volume stops -5AElectro-hydraulic stroker w/ adjustable maximum volume stops & automatic brake control -5CHigh IQ with 10 gpm servovalve & volume indicator -7DHigh IQ with 10 gpm servovalve & 4A (rotary servo) control -7FHigh IQ with 4DC01 valve & volume indicator -7JHigh IQ with 4DC01 valve & 4A (rotary servo) control -7KHydraulic stroker w/ adjustable maximum volume stops -8AHydraulic stroker w/ adjustable maximum volume stops & automatic brake control -8CElectro-hydraulic stroker w/ adjustable maximum volume stops -9AElectro-hydraulic stroker w/ adjustable maximum volume stops & automatic brake control -9CSecondary controlsNone (for fixed displacement units only)omitVolume indicator 2Torque limiter & volume indicator 4Cam position feedback potentiometer 6Cam position feedback RVDT (DC) 8Control locationNone (for fixed displacement units only)omitPrimary control on port A side -APrimary control on port B side -B76

PUMP ORDERING CODEGold Cup pumpsModel number sheetExample model code:P 11 P -2 R 1 * -40 2 -B 00 -0 B 0Control and displacement features2M* & 2N* controls4D01 valve, 110VAC/60Hz with Hirschmann connector 004D01 valve, 12VDC with Hirschmann connector 014D01 valve, 240VAC/50Hz with Hirschmann connector 024D01 valve, 110VAC/60Hz, wiring box 034D01 valve, 12VDC, wiring box 04Cetop3 (D03)(NG6) interface, no directional valve 054D01 valve, 24VDC with Hirschmann connector 064D01 valve, 110VAC/50Hz with Hirschmann connector 075** controlswith deadband 00without deadband 017** controlswithout manual override shutoff 00with manual override shutoff (required for F, G, L & K primary options) 018** controls75 - 350 psi (5 - 24 bar) 0075 - 435 psi (5 - 30 bar) 01100 - 380 psi (7 - 26 bar) 02150 - 400 psi (10 - 28 bar) 0375 - 250 psi (5 - 17 bar) 049** controls24VDC 0012VDC 01All other controls 00Reduced displacement options for P*F & P*MStandard cam (19-degree) 00P6 with 17-degree cam {5.3 cu.in./rev. (87 cc/rev.)} 10P7 with 17-degree cam {6.4 cu.in./rev. (105 cc/rev.)} 10P8 with 17-degree cam {7.1 cu.in./rev. (116 cc/rev.)} 10P6 with 15-degree cam {4.6 cu.in./rev. (76 cc/rev.)} 20P7 with 15-degree cam {5.6 cu.in./rev. (92 cc/rev.)} 20P8 with 15-degree cam {6.2 cu.in./rev. (102 cc/rev.)} 20P6 with 13-degree cam {4.0 cu.in./rev. (66 cc/rev.)} 30P7 with 13-degree cam {4.8 cu.in./rev. (79 cc/rev.)} 30P8 with 13-degree cam {5.3 cu.in./rev. (88 cc/rev.)} 30P11 with 17-degree cam {9.7 cu.in./rev. (160 cc/rev.)} 10P14 with 17-degree cam {12.5 cu.in./rev. (205 cc/rev.)} 10P11 with 15-degree cam {8.5 cu.in./rev. (140 cc/rev.)} 20P14 with 15-degree cam {10.9 cu.in./rev. (179 cc/rev.)} 20P24 with 17-degree cam {22.0 cu.in./rev. (360 cc/rev.)} 10P30 with 17-degree cam {27.2 cu.in./rev. (446 cc/rev.)} 10Internal pump1.07 cu.in./rev. (17.5 cc/rev.) (P6/7/8P/S/X/V/D & P11/14V only) -0 (omit if no external drive is required)2.14 cu.in./rev. (35 cc/rev.) (P11/14P/S/X only) -0 (omit if no external drive is required)2.81 cu.in./rev. (46 cc/rev.) (P24/30P/S/X only) (standard) -0 (omit if no external drive is required)1.61 cu.in./rev. (26.4 cc/rev.) (P24/30P/S/X only) (auxiliary external replenishing flow required) -11.05 cu.in./rev. (17.2 cc/rev.) (P24/30P/S/X only) (auxiliary external replenishing flow required) -23.56 cu.in./rev. (58.3 cc/rev.) (P24/30P/S/X only) -34.84 cu.in./rev. (79.3 cc/rev.) (P24/30P/S/X only) -45.42 cu.in./rev. (88.8 cc/rev.) (P24/30P/S/X only) -56.10 cu.in./rev. (100.0 cc/rev.) (P24/30P/S/X only) -6No internal pump (standard on P*R/L/F/M) -XExternal driveNoneomitBlanking plate (for P6/7/8/11/14S/X only)MSAE-A (SAE 82-2)(P6/7/8/11/14S/X/R/L/M only)ASAE-B (SAE 101-2 for P6/7/8S/X/R/L/M & P11/14/24/30S/X)(SAE 101-2 & SAE 101-4 for P11/14/24/30R/L/M)BSAE-C (SAE 127-2 for P6/7/8R/L/M & P24/30S/X)(SAE 127-2 & SAE 127-4 for P11/14/24/30R/L/M)CSAE-D (SAE 152-4)(P11/14/24/30R/L/M only)DSAE-E (SAE 165-4)(P11/14/24/30R/L/M only)ESAE-F (SAE 177-4)(P24/30R/L/M only)FExternal mountingNo external pump mounted0 (omit if no external drive is required)External pump mounted (requires special modification "-M2")(must be separately specified) 1Special modificationNoneomitNo paint-NPOther special modification (example: bronze caged barrel bearing for low viscosity fluids, tandem pumps, etc.) -M277

GOLD CUP PUMP CONTROL COMBINATIONSGOLD CUP PUMP CONTROL COMBINATIONS102 2M2 *00 2N2 *00 402 5A2 *00 7D6 *00 8A2 *00 8C2 *00 9A2 *00104 2M2 *01 2N2 *01 404 5A2 *01 7D6 *01 8A2 *01 8C2 *01 9A2 *01106 2M2 *02 2N2 *02 4068A2 *02 8C2 *02107 2M2 *03 2N2 *03 407 5A4 *00 7D7 *00 8A2 *03 8C2 *03 9A4 *00108 2M2 *04 2N2 *04 408 5A4 *01 7D7 *01 8A2 *049A4 *012M2 *05 2N2 *05 8C4 *002A2 2M2 *06 2N2 *06 4A2 5A6 *00 7D8 *00 8A4 *00 8C4 *01 9A6 *002A4 2M2 *07 2N2 *07 4A4 5A6 *01 7D8 *01 8A4 *01 8C4 *02 9A6 *012A6 4A68A4 *02 8C4 *032A7 2M4 *00 2N4 *00 4A7 5A7 *00 7F6 *01 8A4 *039A7 *002A8 2M4 *01 2N4 *01 4A8 5A7 *01 7F7 *01 8A4 *04 8C6 *00 9A7 *012M4 *02 2N4 *02 7F8 *018C6 *012H2 2M4 *03 2N4 *03 4B2 5A8 *00 8A6 *00 8C6 *02 9A8 *002H4 2M4 *04 2N4 *04 4B4 5A8 *01 7J6 *00 8A6 *01 8C6 *03 9A8 *012H6 2M4 *05 2N4 *05 4B6 7J6 *01 8A6 *022H7 2M4 *06 2N4 *06 4B7 5C2 *00 8A6 *03 8C7 *00 9C2 *002H8 2M4 *07 2N4 *07 4B8 5C2 *01 7J7 *00 8A6 *04 8C7 *01 9C2 *017J7 *018C7 *022M6 *00 2N6 *00 4C2 5C4 *00 8A7 *00 8C7 *03 9C4 *002M6 *01 2N6 *01 4C4 5C4 *01 7J8 *00 8A7 *019C4 *012M6 *02 2N6 *02 4C6 7J8 *01 8A7 *02 8C8 *002M6 *03 2N6 *03 4C7 5C6 *00 8A7 *03 8C8 *01 9C6 *002M6 *04 2N6 *04 4C8 5C6 *01 7K6 *01 8A7 *04 8C8 *02 9C6 *012M6 *05 2N6 *05 7K7 *018C8 *032M6 *06 2N6 *06 5C7 *00 7K8 *01 8A8 *009C7 *002M6 *07 2N6 *07 5C7 *01 8A8 *018A8 *029C7 *012M7 *00 2N7 *00 5C8 *00 8A8 *039C8 *002M7 *01 2N7 *01 5C8 *01 8A8 *049C8 *012M7 *02 2N7 *022M7 *03 2N7 *032M7 *04 2N7 *042M7 *05 2N7 *052M7 *06 2N7 *062M7 *07 2N7 *072M8 *00 2N8 *002M8 *01 2N8 *012M8 *02 2N8 *022M8 *03 2N8 *032M8 *04 2N8 *042M8 *05 2N8 *052M8 *06 2N8 *062M8 *07 2N8 *07• Unless otherwise specified on purchase order, the followingfactory setting will be used.Maximum Stop: Full Displacement (both sides of center pumps)Minimum Stop: Zero Displacement ("V" units & 2A controls only)Pressure Compensator Override: 1000 psi nominalTorque Limiter (**4): P6 @ 1800 rpm = 60 hp nominal(40% of full torque) P7 @ 1800 rpm = 72.5 hp nominalP8 @ 1800 rpm = 80 hp nominalP11 @ 1800 rpm = 110 hp nominalP14 @ 1800 rpm = 140 hp nominalP24 @ 1800 rpm = 240 hp nominalP30 @ 1800 rpm = 300 hp nominal78

79Notes:

MOTOR ORDERING CODEGold Cup motorsModel number sheetExample model code:M 11 R -2 N 1 * -9A 5 -B 0 0 -B 0MotorMDisplacement6.00 cu.in./rev. (98 cc/rev.) 67.25 cu.in./rev. (119 cc/rev.) 78.00 cu.in./rev. (131 cc/rev.) 811.0 cu.in./rev. (180 cc/rev.) 1114.0 cu.in./rev. (229 cc/rev.) 1424.6 cu.in./rev. (403 cc/rev.) 2430.6 cu.in./rev. (501 cc/rev.) 30TypeFixed displacementFFixed displacement with shuttle packageGFixed displacement with thru-driveMFixed displacement with thru-drive & shuttle packageNVariable displacementVVariable displacement with shuttle packageHVariable displacement with thru-driveRVariable displacement with thru-drive & shuttle packageLEfficiencyHigh efficiency (for M24 only)HStandard efficiencyleave blankShaftKeyed SAE - mechanical shaft seal (single lip seal on M6/7/8F/G/M/N) -2 or -02Splined SAE - mechanical shaft seal (single lip seal on M6/7/8F/G/M/N) -3 or -03Keyed SAE-D (mounting & shaft) - mechanical shaft seal (for M6/7/8 only)(single lip seal on M6/7/8F/G/M/N) -4 or -04Splined SAE-D (mounting & shaft) - mechanical shaft seal (for M6/7/8 only)(single lip seal on M6/7/8F/G/M/N) -5 or -05Keyed SAE - double lip shaft seal -7 or -07Splined SAE - double lip shaft seal -8 or -08Keyed (long) SAE - double lip shaft seal -9 or -09Keyed (long) SAE - mechanical shaft seal -10RotationBi-directionalNSealsNitrile (Buna N) 1EPR (not available when using "5A" primary control)(pump will be unpainted unless otherwise specified) 4Flourocarbon (Viton) 5Design letter(assigned by manufacturer) *Primary controlsNone (for fixed displacement units only)omitCylinder control w/ adjustable maximum volume stops -2ACylinder control - 2 position electro-hydraulic w/ adjustable maximum volume stop (spring offset to maximum displacement) -2MElectro-hydraulic stroker w/ adjustable maximum volume stops -5AHydraulic stroker w/ adjustable maximum volume stops (required for M24/30 reverse compensator units) -8AElectro-hydraulic stroker w/ adjustable maximum volume stops -9ASecondary controlsNone (for fixed displacement units only)omitVolume indicator 0Reverse compensator (spring offset to maximum displacement) + volume indicator 3Reverse compensator (spring offset to minimum displacement) + volume indicator 5Cam position feedback potentiometer 6Cam position feedback RVDT (AC) 7Cam position feedback RVDT (DC) 8Reverse compensator (3) + cam position feedback potentiometer (6)UReverse compensator (3) + cam position feedback RVDT (7)VReverse compensator (3) + cam position feedback RVDT (8)WReverse compensator (5) + cam position feedback potentiometer (6)XReverse compensator (5) + cam position feedback RVDT (7)YReverse compensator (5) + cam position feedback RVDT (8)ZControl locationNone (for fixed displacement units only)Primary control on port A side -APrimary control on port B side -Bomit80

MOTOR TITLE ORDERING LINE CODEGold Cup motorsModel number sheetExample model code:M 11 R -2 N 1 * -9A 5 -B 0 0 -B 0Control and displacement features2M control4D01 valve, 110VAC/60Hz with Hirschmann connector 04D01 valve, 12VDC with Hirschmann connector 14D01 valve, 240VAC/50Hz with Hirschmann connector 24D01 valve, 110VAC/60Hz, wiring box 34D01 valve, 12VDC, wiring box 4Cetop3 (D03)(NG6) interface, no directional valve 54D01 valve, 24VDC with Hirschmann connector 64D01 valve, 110VAC/50Hz with Hirschmann connector 75A controlwith deadband 0without deadband 18A control75-250 psi (5-17 bar) 0250-450 psi (17-31 bar) 19A control24VDC 012VDC 1All other controls 0Reduced displacement options for M*F, M*G, M*M, & M*NStandard cam (19-degree) 0M6 with 17-degree cam {5.3 cu.in./rev. (87 cc/rev.)} 1M7 with 17-degree cam {6.4 cu.in./rev. (105 cc/rev.)} 1M8 with 17-degree cam {7.1 cu.in./rev. (116 cc/rev.)} 1M6 with 15-degree cam {4.6 cu.in./rev. (76 cc/rev.)} 2M7 with 15-degree cam {5.6 cu.in./rev. (92 cc/rev.)} 2M8 with 15-degree cam {6.2 cu.in./rev. (102 cc/rev.)} 2M6 with 13-degree cam {4.0 cu.in./rev. (66 cc/rev.)} 3M7 with 13-degree cam {4.8 cu.in./rev. (79 cc/rev.)} 3M8 with 13-degree cam {5.3 cu.in./rev. (88 cc/rev.)} 3M11 with 17-degree cam {9.7 cu.in./rev. (160 cc/rev.)} 1M14 with 17-degree cam {12.5 cu.in./rev. (205 cc/rev.)} 1M11 with 15-degree cam {8.5 cu.in./rev. (140 cc/rev.)} 2M14 with 15-degree cam {10.9 cu.in./rev. (179 cc/rev.)} 2M24 with 17-degree cam {22.0 cu.in./rev. (360 cc/rev.)} 1M30 with 17-degree cam {27.2 cu.in./rev. (446 cc/rev.)} 1Shuttle valve featureswithout orifices0 (omit for M*F/M/V/R units)with orifices 2External driveNone (for M*F/G/V/H units only)omitSAE-A (SAE 82-2)(for M6/7/8/11/14M/N/R/L units only) -ASAE-B (SAE 101-2 for M6/7/8M/N/R/L)(SAE 101-2 & SAE 101-4 for M11/14/24/30M/N/R/L) -BSAE-C (SAE 127-2 for M6/7/8M/N/R/L)(SAE 127-2 & SAE 127-4 for M11/14/24/30M/N/R/L) -CSAE-D (SAE 152-4)(for M11/14/24/30M/N/R/L units only) -DSAE-E (SAE 165-4)(for M11/14/24/30M/N/R/L units only) -ESAE-F (SAE 177-4)(for M24/30M/N/R/L units only) -FExternal mountingNo external motor mounted 0External motor mounted (requires special modification "-M2")(must be separately specified) 1Special modificationNoneomitNo paint-NPOther special modification (example: bronze caged barrel bearing for low viscosity fluids, tandem motors, etc.) -M281

GOLD CUP MOTOR CONTROL COMBINATIONSGOLD CUP MOTOR CONTROL COMBINATIONS2A0 *2M3 *05A0 *0 8A0 *0 9A0 *0*2A3 *2M3 *15A0 *1 8A0 *1 9A0 *1*2A5 *2M3 *22A6 *2M3 *3 *5A3 *0 8A3 *0*9A3 *02A7 *2M3 *4 *5A3 *1 8A3 *1*9A3 *12A8*2M3 *5*2M3 *6 *5A5 *0 8A5 *0*9A5 *02M0 *0 *2M3 *7 *5A5 *1 8A5 *1*9A5 *12M0 *12M0 *2 *2M5 *05A6 * 0 8A6 *0 9A6 *02M0 *3 *2M5 *15A6 *1 8A6 *1 9A6 *12M0 *42M0 *5*2M5 *2*2M5 *35A7 *0 8A7 *0 9A7 *02M0 *6 *2M5 *45A7 *1 8A7 *1 9A7 *12M0 *7*2M5 *5*2M5 *65A8 *0 8A8 *0 9A8 *0*2M5 *75A8 *1 8A8 *1 9A8 *12M6 *02M6 *12M6 *22M6 *32M6 *42M6 *52M6 *62M6 *72M7 *02M7 *12M7 *22M7 *32M7 *42M7 *52M7 *62M7 *72M8 *02M8 *12M8 *22M8 *32M8 *42M8 *52M8 *62M8 *7* Not available for M24 or M30Unless otherwise specified on purchase order, the followingfactory setting will be used.Maximum Stop: Full DisplacementMinimum Stop: Approximately 30% DisplacementReverse Pressure Compensator Override (**3 & **5): 1000 psinominal82

83Notes:

SALES & SERVICE WORLDWIDEDenison Hydraulics Inc14249 Industrial ParkwayMarysville, OH 43040 USATel :........................... 937-644-3915Fax :.......................... 937-642-3738E-mail:denison@denisonhydraulics.comCall toll-free800-551-5956in North America orvisitwww.denisonhydraulics.comto locate aDenison representativenearest you.North AmericaCanadaDenison Hydraulics Canada Inc.2880 Brighton Road, Unit 1Oakville, ON L6H 5S3, CanadaTel : +1 (905) 829-5800Fax : +1 (905) 829-5805Latin AmericaMexico, Central America, SouthAmerica, Caribbean countriesDenison Hydraulics Inc.7850 NW 146 StreetSuite 512Miami Lakes, FL 33016, USATel : +1 (305) 362-2246Fax : +1 (305) 362-6220Asia-PacificFor more information, please contact:AustraliaDenison Hydraulics PTY41-43 St Hilliers RoadP.O.Box 192Auburn N.S.W. 2144, AustraliaTel : +61 (2) 9646 5200Fax : +61 (2) 9643 1305Hong KongDenison Hydraulics Ltd.Unit 6A, 33/F Cable TV Tower9 Hoi Shing Road, Tsuen WanNT, Hong KongTel : +852 2498 8381Fax : +852 2499 1522JapanDenison Japan Inc.4-2-1 Tsujido-ShinmachiFujisawa 251-0042, JapanTel : +81 (466) 35-3050Fax : +81 (466) 35-2019People Republic of ChinaShanghai Denison HydraulicsEngineering Ltd.Room 8018, No. 601Zhang Yang Road,Pudong New AreaShanghai 200120, P.R. ChinaTel : +86 (21) 58205042 / 34Fax : +86 (21) 58205014SingaporeDenison Hydraulics PTE LTDBlk 4012 Ang Mo Kio Ave 10,Unit #07-01D Techplace ISingapore 569628Tel : +65 268 7840Fax : +65 268 7847TaiwanDenison Hydraulics LTD6F-10, No. 79,Sec. 2 Roosevelt Rd,Taipei, Taiwan, ROCTel : +886-2-23645101Fax : +886-2-23639025EuropeAustriaDenison Hydraulics GmbHZweigniederlassung LinzHaibachstraße 694061 Pasching, AustriaTel : +43 (72 29) 48 87Fax : +43 (72 29) 6 30 92BeneluxDenison Hydraulics Benelux B.V.Pascalstraat 1003316 GR Dordrecht, HollandTel : +31 (78) 6543 070Fax : +31 (78) 6175 755DenmarkDenison Hydraulics Denmark A/SIndustrikrogen 22635 Ishöj, DenmarkTel : +45 (4371) 15 00Fax : +45 (4371) 15 16FinlandDenison Lokomec OyPolunmäenkatu 22P.O. Box 11633721 Tampere, FinlandTel : + 358 (3) 357 5100Fax : + 358 (3) 357 5111FranceDenison Hydraulics S.A.14 route du bois blancBP 53918105 Vierzon, FranceTel : +33 (2) 48 53 01 20Fax : +33 (2) 48 75 02 91Great BritainDenison Hydraulics UK LTDKenmore RoadWakefield 41, Industrial ParkWakefield, WF2 OXEWest Yorkshire, EnglandTel : +44 (1924) 826 021Fax : +44 (1924) 826 146GermanyDenison Hydraulics GmbHAuf dem Sand 14D 40721 Hilden, GermanyTel : +49 (0) 2103 / 940-3Fax : +49 (0) 2103 / 940-558ItalyDenison Hydraulics SrlVia Le Europa 6820090 Cusago (MI), ItalyTel : +39 (02) 90330-1Fax : +39 (02) 90390694/5/6Denison Calzoni S.p.AVia Caduti di Sabbiuno15/1740011 Anzola dell'EmiliaBologna, ItalyTel : +39 (051) 6501611Fax : +39 (051) 736221SpainDenison Hydraulics S.A.Gomis 108023 Barcelona, SpainTel : +34 (93) 253 1990Fax : +34 (93) 211 6507SwedenDenison Hydraulics Svenska ABSporregatan 13213 77 - Malmö, SwedenTel : +46 (40) 600 13 00Fax : +46 (40) 600 13 50OthersOther European, Middle East,African countriesDenison Hydraulics S.A.ATTN: Export Office14 route du bois blancBP 53818105 Vierzon, FranceTel : +33 (2) 48 53 01 20Fax : +33 (2) 48 53 01 46AGS Printed in U.S.A. 5/03http://www.denisonhydraulics.comCopyright © 2002 Denison Hydraulics Inc. All rights reserved. 4-30-02