Assembly Instruction 485-8900 CRIB ENCHANTMENT - Cribs.com
Assembly Instruction 485-8900 CRIB ENCHANTMENT - Cribs.com
Assembly Instruction 485-8900 CRIB ENCHANTMENT - Cribs.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Assembly</strong> <strong>Instruction</strong><strong>485</strong>-<strong>8900</strong> <strong>CRIB</strong> <strong>ENCHANTMENT</strong>HARDWARE ENCLOSED:(F) Hex bolt screws: M6 x 40 – 8pcs(G) Bottom head bolt M6 x 16 – 4pcsNOTE: Store all hardware out of child’s reach.TOOLS REQUIRED:(H) Hex Allen Wrench with Ball tip -1pc (included)Phillips Screwdriver (not included)PRE- ASSEMBLY: Remove all parts and hardware from the box and lay out on a clear carpeted or scratch-free worksurface, as this will avoid damaging parts during assembly. The shipping box provides an ideal worksurface. Do not dispose of any packaging or contents of the shipping carton until assembly is <strong>com</strong>pleted to avoidaccidentally discarding small parts or hardware. Use the parts and hardware lists above to identify and separate each of the pieces included. The illustrations provided allow for easier assembly when used in conjunction with the assemblyinstructions. The use of power tools for assembly is not re<strong>com</strong>mended. Power tools can damage hardware or splitwood.ASSEMBLY INSTRUCTIONS:1. Remove the assembly instructions from the envelope attached to the Crib and review. Keep them handyfor referring to the part and hardware descriptions2. Assemble the Left Side Gate (A) and Right Side Gate (B) to the Mattress Metal Base Brackets (C) with 4Bolts (G) using the Hex Allen Wrench (H). Adjust the brackets of the Mattress Metal Base (C) to fit thehole of Side Gate once assembling (See Fig 1)NOTE: The Mattress support base may be at the highest level when the child is born. It must be at thelowest level by the time the child can stand up.Page 3 of 6
Change language