700 Series Manual - Fusion

To lock or unlock a channel:1. Press the Menu key.2. (if required) turn and then press the Encoder to select Parental > Unlock.Enter your access code.3. Select the Lock/Unlock menu item.4. Turn the Encoder to highlight a channel then press the Encoder tolock ( ) or unlock ( ) the channel, as required.5. Press the Menu key (or leave to time out) to exit.ADVANCED SETTINGSThe settings described in this section are usually set up when the unit isinstalled and not changed again.Menu keyRotaryEncoderSub filterUse the sub filter setting to control the sub-woofer cutoff frequency. Audiosignals above the selected frequency will not be passed on to the sub-woofer.The sub filter settings apply to all sub-woofer outputs.50