TEDDERS ROTARY RAKES WHEEL RAKES - AGCO Iron

4240 Rotary RakeMODEL 4240Dimensions & WeightsLength (transport) 12.4 ft. (3.77 m)Length (working) 15.75 ft. (4.80 m)Width (transport) 5.5 ft. (1.67 m)Width (working) 151 to 174 ft. (3.83 to 4.42 m)Height (transport) 6.83 ft. (2.08 m)Height (working) 3.66 ft. (1.12 m)Weight lb (kg)1,422 lb. (645 kg)Weight (crated) lb (kg)1,522 lb. (690 kg)MainframeTypePull-typeWorking widths ft (m) Up to 14.75 ft. (4.50 m)PTO driveline1 3/8” – 6 Spline with torque limiterWindrow deflector curtainThree positionsMax. raking speed mph (km/hr)8 mph (13 km/hr)Tandem axleStandardTires16 x 6.50 /8 Ply ribbed with tubesRotorOverall diameter 11.66 ft. (3.55 m)Number of toothbars 124200 Series TeddersMODEL 4210 4227Dimensions & WeightsWidth (field) 9.75 ft. (3.0 m) 17.55 ft. (5.35 m)Width (transport) 6.17 ft. (1.9 m) 8.2 ft. (2.5 m)Height (field) 3.12 ft. (0.95 m) 3.87 ft. (1.18 m)Height (transport) 5.58 ft. (1.2 m) 8.37 ft. (2.55 m)Length 6.89 ft. (2.1 m) 8.20 ft. (2.5 m)Weight 468 lbs. (212.3 kg) 730 lbs. (331.1 kg)MainframeRotors 2 4Rotor speed 189 rpm 189 rpmDouble tines per rotor 6 6Tooth length 15.75 in. (400 mm) 15.75 in. (400 mm)Wheels 2 4Tire size 15 X 6.00 X 6 15 X 6.00 X 6GeneralTractor attachment Pull-type or mounted Pull-type or mountedHorsepower - (min.)15 hp (11.2 kW) pull-type or25 hp (19 kW) 3-pt. mounted20 hp (14.9 kW) pull-type or40 hp (30 kW) mountedPTO speed 540 rpm 540 rpmHydraulics N/A One double-acting remote valveWheel Rakes/Rotary Rakes/Tedders SpecificationsNumber of double tines per toothbar 4Number of double tines 48Tooth controlCam follower bearings in sealed caseRotor speed rpm 67.5GeneralHorsepower - (min.)HydraulicsPTO speed35 hp (26.1 kW)One single-acting remote (frame lift)540 rpm19 19