Rada individual showers

More documents

Recommendations

Info

commercial showeringTECHNICAL SPECIFICATIONInstallation and MaintenancePlease refer to the appropriate Product Manual.Quick and easy to install and service. Each panel supplied with15mm isolating ball valves on inlets as standard. All componentsthat require routine test and maintenance are easily accessible.ConnectionsInlet: 15mm compression to both hot and cold water inlet pipeApprovalsBuildcert TMV3 Thermostatic Mixing Valve Scheme approved:-LP-S Low Pressure ShowerHP-S High Pressure ShowerCertificate No. ETC/179/0602Complies with the technical requirements ofBS7942 for the same designations.Designed to comply with European Standards EN1111 and EN1287.WRAS approved (Water Regulations Advisory Scheme).Designed, manufactured and supported in accordance with accreditedBS EN ISO 9001:2000 Quality Management Systems andBS EN ISO 14001:1996 Environmental Management Systems.OperationThe flow cycle is activated by pressing the flow button. Theflow rate is constant and is automatically turned off afterapproximately 30 seconds. Further economy of water usagecan be achieved by means of an internal flow rate adjuster.Showering temperature can be selected (up to apre-set maximum temperature) via rotary control knob.MaterialsPanel Case: Brushed stainless steel or stainlesssteel white powder coated finish.Stainless steel braided flexible hoses withEPDM liner used throughoutRada 215-t3 thermostatic mixing valve: Body is of chromeplatedDZR brass with chrome-plated knob.Timed flow control: Body and some internal componentsare manufactured from copper alloys. Other internalcomponents are made from engineering plastics.Shower head: Chromium plated copper alloybody and engineering plastic spray plate.PressuresMinimum maintained pressure with 9 l/min flowregulator fitted in shower head: 0.5 barMinimum maintained pressure with flow regulators removed: 0.2 barMaximum static pressure: 7.0 barApplicationFor leisure centres, sports clubs, schools, healthcarefacilities, factories, military establishments, etc, wheresafe adjustable temperature control, vandal resistanceand water economy are prime requirements.Long slim line panel aids wall coverage. Particularly suitablefor upgrading existing surface mounted shower installationsas no chasing out of walls or breaking of tiles is required.Flow Diagram14.012.0Flow Rate - L/min10.08.06.04.0001.0 2.0 3.0 4.0 5.0Pressure - Barwith flow regulatorswithout flow regulatorsWeightProductGross Weight(Kgs)Total PackagedWeight (Kgs)Rada PA - 215TF/TFW 9.70 11.30Temperature RangeOptimum thermostatic control range: 35 °C - 45 °CRecommended hot: 55 °C - 65 °CRecommended cold: 5 °C - 20 °CMaximum hot: 85 °CKohler Mira LimitedCromwell Road, CheltenhamGloucestershire, GL52 5EPSpecification EnquiriesTel: 01242 282527, Fax: 01242 282404Email: rada_technical@mirashowers.comwww.radacontrols.comRada is a registered trademark of Kohler Mira Limited.The company reserves the right to alter product specification without notice.© March 2006 Kohler Mira Limited. All rights reserved.No part of this document, or any accompanying document, may bereproduced or transmitted in any form or by any means, includingphotocopying or electronically, without the permission of Kohler Mira Limited.P5574
Commercial Shower panelPA - V8F / V8FW• Pre-plumbed shower panel with integral TMV3approved thermostatic mixing valve with flowand temperature adjustment and with easy cleansingle spray handset, flexible hose and slide bar• User selection of flow and temperature(up to a safe, pre-set maximum)• Concealed pipe-work which protects usersfrom high surface temperatures• Long, sleek design – suitable for all ages and abilities• Robust & durable materials used throughout• Easy to install and maintain - Integralisolators & flexible connections provided• Satin stainless steel or whitepowder coated panel finish• For connection to hot & cold suppliesDimensions (mm)Specify as: Rada PA-V8F Shower Panel Assembly (1.1613.048)Ready to install satin finish stainless steel panel with hot and coldwater pipe entry connecting to a Meynell V8/3 TMV3 approvedthermostatic mixing valve, having independent flow and temperaturecontrol, with easy clean single spray handset, flexible hose and robustslide bar with easy to use slide mechanism.Specify as: Rada PA-V8FW Shower Panel Assembly (1.1613.049)Ready to install white powder coated stainless steel panel withhot and cold water pipe entry connecting to a Meynell V8/3 TMV3approved thermostatic mixing valve, having independent flow andtemperature control, with easy clean single spray handset, flexiblehose and robust slide bar with easy to use slide mechanism.121745192 490Kohler Mira LimitedCromwell RoadCheltenhamGloucestershireGL52 5EPSpecification EnquiriesTel: 01242 282527Fax: 01242 282404Email: rada_technical@mirashowers.comwww.radacontrols.com
Page 1 and 2: individual showeringrada 415 fc pre
Page 3: i/tlindividual showeringrada exact-
Page 7 and 8: individual showeringmeynell v6 ther
Page 9 and 10: individual showeringIndividual show
Page 11 and 12: individual showeringmeynell v4 sing
Page 13 and 14: individual showeringrada revive-3 t
Page 15 and 16: individual showeringmeynell v8/3 b
Page 17 and 18: individual showeringrada 415 fbc pr
Page 19 and 20: i/tlindividual showeringrada exact-
Page 21 and 22: individual showeringmeynell v6 B th
Page 23 and 24: COMMERCIAL Shower panelrada 15tf /
Page 25: Commercial Shower panelPA - 215TF /
Page 29 and 30: individual/group showeringRada 215-
Page 31 and 32: individual/group showeringRada 215-

Rada individual showers

Create successful ePaper yourself

Delete template?

Save as template?