1 - ГрандСервис. Телекоммуникационное оборудование

BYAJHVFWBZ LKZ PFRFPJD13FC for FC-type connector (not available in SF1,SF2 and SF3 options)SC/APC for SC/APC-type connector with SFS only(for OP-XLT1 only)+ 85 for 850 nm, multimode (not available forOP-1550)13 for 1310 nm, multimode (not available forOP-4T1, OP-4T1C, OP-4E1, OP-4E1C)13L for 1310 nm, single mode, laser diode15L for 1550 nm, single mode, laser diode13LH for 1310 nm, single mode, long haul laserdiode (not available for OP-4T1C, OP-4E1C)15LH for 1550 nm, single mode, long haul laserdiode (not available for OP-4T1C, OP-4E1C)SF1 for transmit 1310 nm, receive 1550 nm(not available for OP-M, OP-4E1C, OP-4T1C,OP-1550, OP-1551, OP-1553)SF2 for transmit 1550 nm, receive 1310 nm(not available for OP-M, OP-4E1C, OP-4T1C,OP-1550, OP-1551, OP-1553)SF3 for transmit and receive at 1310 nmSC/APC connector (not available for OP-M,OP-1550, OP-1551, OP-1553)Note: When one of the devices is ordered with SF1 interface, the otherside has to be ordered with SF2 interface.d Specify D for optional second redundant link (same type asmain link)$ Specify S for optional service channel (not available withcoax uplink)? Specify LRS-24 chassis typeF Front (ETSI version)B Back (ANSI version)@ Specify E1 connector typeTB Terminal blockU Unbalanced mini-BNC (OP-4E1C only)SC SCSI, including SCSI to 4 x RJ-45 octopus cable~ Specify main link type34 34 Mbps (E3) coax interface (for OP-XLE1 only)45 45 Mbps (T3) coax interface (for OP-T3 and OP-T3Lonly)155 155 Mbps (STM-1/OC-3) coax interface (for OP-1551and OP-1553 only)! Specify fiber typeMM for multimode fiberSM for single mode fiberSF1 for single fiber transmit 1310 nm, receive 1550 nm(for OP-1551 and OP-1553)SF2 for single fiber transmit 1550 nm, receive 1310 nm(for OP-1551 and OP-1553)abceSF3 for single fiber transmit and receive at 1310 nm(for OP-1551 and OP-1553)Specify number of E1/T1 ports or alternatively, type ofEthernet interface2E1U 2 unbalanced E1 ports (OP-XLE1 only)2T1 2 T1 ports (OP-XLT1 only)4E1U 4 unbalanced E1 ports (OP-XLE1 only)2E1B 2 balanced E1 ports (OP-XLE1 only)4E1B 4 balanced E1 ports (OP-XLE1 only)4T1 4 T1 ports (OP-XLT1 only)ETH 1 Ethernet 10BaseT portFETH 1 Fast Ethernet 10/100BaseT port with VLAN supportSpecify number of ports and rate per port (default is a singleport)4/1.5 Quad port, 1.5 Mbps each (OP-XLT1 only)4/2 Quad port, 2 Mbps each (OP-XLE1 only)8 Single port, 8 Mbps (OP-XLE1 only)N64/c Single port, n x 64 kbps (OP-XLE1 only)Specify optional additional E1/T1 ports2E1B 2 E1 ports, balanced2E1U 2 E1 ports, unbalancedSpecify type of data interfaceV35 V.35V.36 V.36 (not available for OP-XLT1)X21 X.21 (not available for 8 Mbps, single port option)530 RS-530HSSI HSSI (for single port, 6 or 8 Mbps only)Jgnjdjkjrjyyst vjltvs# ghtj,hfpjdfntkbFOMi-E3/q/ab/g/&FOMi-T3/q/ab/g/&FOMi-E3CF/ab/gFOMi-E3CB/ab/gFOMi-T3CF/ab/gFOMi-T3CB/ab/gFOMi-E1T1/*/~/#FOMi-E1T1CF/#FOMi-E1T1CB/#FOMi-E1T1CDF/#FOMi-E1T1CDB/#FOMi-40/*/~/#/^FOMi-40CF/#/^E3 or HSSI fiber optic modem, standalone withremote controlT3 or HSSI fiber optic modem, standalone withremote controlE3 fiber optic modem card for LRS-24,ETSI versionE3 fiber optic modem card for LRS-24,ANSI versionT3 fiber optic modem card for LRS-24,ETSI versionT3 fiber optic modem card for LRS-24,ANSI versionE1/T1 modem with remote controlE1/T1 modem card for ETSI LRS-24E1/T1 modem card for ANSI LRS-24Dual E1/T1 modem card for ETSI LRS-24Dual E1/T1 modem card for ANSI LRS-2464–2048 kbps sync modem with remote control64–2048 kbps sync modem card for ETSI LRS-24BYAJHVFWBZ LKZ PFRFPJDRAD Data Communications 2005 Rfnfkju175