1 - ГрандСервис. Телекоммуникационное оборудование

BYAJHVFWBZ LKZ PFRFPJD+ Specify power supplyAC for 100–240 VACDC for 20–70 VDC= Specify power supplyAC for 100–240 VAC24 for 24 VDC48 for –48 VDC^ Specify interfaceV24 V.24/RS-232V35 V.35V36 V.36/RS-449/RS-422X21 X.21UTP Built-in Ethernet bridgeUTPQ Built-in Ethernet bridge with VLAN supportUTP/QN 10/100BaseT bridge with VLAN supportUTP-IP Built-in IP router, RJ connectorVtcnysq ljcneg gj EthernetETX-102/#/*/%Ethernet network termination unit withFE uplink# Specify power supplyAC AC power supply 100–240 VACDC DC power supply –40 to –72 VDC* specify type of SFP for network interfaceSFP-FE-1 SFP, 100BaseFx, MM 1310 nm, up to 2 km, LCSFP-FE-2 SFP, 100BaseFx, SM 1310 nm, up to 15 km, LCSFP-FE-3 SFP, 100BaseFx, SM 1310 nm, up to 40 km, LCSFP-FE-4 SFP, 100BaseFx, SM 1550 nm, up to 80 km, LCNull No SFP% Number of 10/100BaseT user with ports1ETH Single 10/100BaseT user port4ETH Four 10/100BaseT user portETX-202/#/*/%/@Ethernet network termination unit with GE uplink# Specify power supplyAC AC power supply 100–240 VACDC DC power supply –40 to –72 VDC* Specify type of SFP for network interfaceSFP-GE-1 SFP, 1000Base-SX, MM 850 nm, up to 550 m, LCSFP-GE-2 SFP, 1000Base-LX10, SM 1310 nm, up to 10 km, LCSFP-GE-3 SFP, GbEth, SM 1550 nm, up to 80 km, LCNull No SFP% Specify user port 1SFP-GE-1 SFP, 1000Base-SX, MM 850 nm, up to 550 m, LCSFP-GE-2 SFP, 1000Base-LX10, SM 1310 nm, up to 10 km, LC9SFP-GE-3 SFP, GbEth, SM 1550 nm, up to 80 km, LCUTP Fixed 10/100/1000BaseT UTP LC, 500 m@ Specify user part 2SFP-GE-1 SFP, 1000Base-SX, MM 850 nm, up to 550 m, LCSFP-GE-2 SFP, 1000Base-LX10, SM 1310 nm, up to 10 km, LCSFP-GE-3 SFP, GbEth, SM 1550 nm, up to 80 km, LCUTP Fixed 10/100/1000BaseT UTP LC, 500 mNull No SFPMIC-21T/35C/$MIC-232/485/*/&MIC-232/530/*MIC-24/11/*/@MIC-24/35/*MIC-24T/21CMIC-35T/21C/!CBL-36T/21CCBL-530/449/*CBL-530T/21C/*UCI/HS/~UCI-M/^PS/~/+Ghtj,hfpjdfntkb crjhjcnbgthtlfxb b bynthatqcjdX.21 DTE to V.35 DCE (male/female selection onV.35) (requires 9 VDC power supply – see PS)RS-232 to RS–485 converter (may require 9 VDCpower supply – see PS)V.24 to RS-530, DTE/DCE selectable(male/female selection on RS-530)Async V.24 to V.11, DTE/DCE selectable(male/female selection on V.24)V.24 to V.35, DTE/DCE selectable (male/femaleselection on V.35 and V.24)V.24 DTE to X.21 DCEV.35 DTE to X.21 DCE (male/female selectionon V.35)V.36 (RS-449) DTE to X.21 DCERS-530 DTE/DCE to RS-449 (V.36) DCE/DTE(male/female selection on RS-449)RS-530 DTE to X.21 DCE (male/female selectionon X.21)High speed universal interface converterInterface module for UCI (two modules arerequired)DC power supply% Specify connector type(default X.21 or V.36 connector is female)M-M Two male connectors$ Specify connector type (default V.35 connector is female)M V.35 male connector* Specify connector typeM MaleF Female& Specify connector on RS–485 side (default is terminal block)RJ-11 RJ-11 plugRJ-45 RJ-45 plug@ Specify V.11 connector type (default is terminal block)RJ11 RJ-11186 RAD Data Communications 2005 Rfnfkju