Download - ICP DAS

WinCon-8X4XOrdering Information:W-8341-G: Compact PACOrdering Information:W-8741-G: Compact PACDual-LAN PACSpecifications & FeaturesIntel Strong ARM CPU, 206MHzSDRAM: 64M bytesFlash : 32M bytesEEPROM: 16K bytes64-bit hardware unique serial numberBuilt-in Watchdog TimerReal-Time Clock10/100 BaseT x 2VGA port:320x240x16 to 1024x768x16Default is 640x480x161 x Compact Flash type II insert with ejectorUSB 1.1 x 2Reset button & rotate switchPower LEDsCOM0: Internal useCOM2: RS-232COM3: RS-485COM1: Serial Control for 87K SeriesI/O Expansion Slot:W-8341: 3 slots, W-8741: 7 slotsPower Supply:20W, Unregulated +10Vdc to +30VdcOperating Temp.: -25˚C to +55˚CStorage Temp.: -30˚C to +85˚CHumidity: 5~95%Dimensions (LxHxD)(mm):229 x 110 x 90(W-8341)354 x 110 x 90(W-8741)WinCon-8000OptionDM-64T:6.4" LCD ModuleDM-121D-AL:12.1" LCD monitorNS-205: 5-Port Industrial 10/100 Base-TX Ethernet SwitchNS-208: 8-Port Industrial 10/100 Base-TX Ethernet SwitchNote: Please use NS-205 or NS-208 Industrial Ethernet Switch with Wincon-8x4x series of controllers.2-6

WinCon-8000WinCon-8X4XW-8347-GW-8747-GOrdering Information:ISaGRAF Dual-LAN PACW-8347-G: 3 slot I/O ExpansionW-8747-G: 7 slot I/O ExpansionW-8349-GW-8749-GOrdering Information:InduSoft Dual-LAN PACW-8349-G: 3 slot I/O ExpansionW-8749-G: 7 slot I/O ExpansionISaGRAF/InduSoft PACSpecifications & FeaturesThe same hardware specificationsof WinCon-8341/8741The ISaGRAF Wincon target driver& target license are includedTwo Wincon-8x47/8x46 can be setup as Redundancy system. If one isdamaged, the other one still works.More information athttp://www.icpdas.com/faq/isagraf.htm"FAQ036"Option• DM-64T:6.4" LCD Module• DM-121D-AL:12.1" LCD monitor• NS-205: 5-Port Industrial 10/100Base-TX Ethernet Switch• NS-208: 8-Port Industrial 10/100Base-TX Ethernet SwitchNote:Please use NS-205 or NS-208 Industrial EthernetSwitch with Wincon-8x4x series of controllers.Specifications & FeaturesThe same hardware specificationsof WinCon-8x41 seriesThe W-8x49 has 300 tags runtimelicense with one driver and one webthin client.The W-8x49-G 1500 has 1500 tagsruntime with 3 drivers and one webthin client.Option• InduSoft-NT1500D: Local Interfacedevelopment version for WindowsNT/2000/XP (1500Tag, 3 drivers)• InduSoft-CE1500D: Local Interfacedevelopment version for WindowsCE(CE View) (1500 Tags, 3 drivers)• InduSoft-NT300D: Launch version forWindows NT/2000/XP(300Tag,3 drivers)• InduSoft-CE300D: Launch version forWindows CE (300 Tags, 3 drivers)• NS-205: 5-Port Industrial 10/100Base-TX Ethernet Switch• NS-208: 8-Port Industrial 10/100Base-TX Ethernet SwitchNote:Please use NS-205 or NS-208 Industrial EthernetSwitch with Wincon-8x4x series of controllers.2-7

LinCon-8000Linux PACLinCon-8000LinCon-8000 SeriesThe LinCon-8000 is the flagship compact embedded controller manufacturedby ICP DAS. Its leading technology gives you all of the best features of bothtraditional PLCs and Linux capable PCs. The LinCon-8000 system is poweredby Linux and brings in the Linux programming style and skill into the world ofPC-based PLC. Application developers can develop their own programs directlyinto C or Java language by using the LinCon-8000 SDK, and then downloadthem into the LinCon-8000 for application and use.The Linux OS demands less system resources from the embedded controllerand is therefore the best fit for it because of the embedded controller has somelimitations in system resources. It is for this reason that the LinCon-8000embbeded controller has been published to be a new generation product fromICP DAS and the Embedded-Linux OS has been adopted into the LinCon-8000.The LinCon-8000’s main purpose is to allow the numerous enthusiastic linuxusers to control their own embedded systems easily within the LinuxEnvironment.ApplicationsFactory automationIndustrial machine controlMaritime electronicBuilding management systemAircraft engines2-8

LinCon-8000LinCon-8000Linux PACNO. of Slot 3/7L-8 X 4 X X1-Master8-MatlabG-Gray color-(blank)Defaultblue colorThe LinCon-8000 model type is ruled as L-8X3X, as shown in the abovefigure. The Second number shows the slot numbers coming with the maincontroller unit. Currently, we provide three types of 3 and 7 slots. The lastnumber demonstrates the application platform. 1 stands as the Master controllerand it means that the user needs to design the application program bythemselves. For more details on the product’s specifications, please refer to thefollowing product model table given below.Software SpecificationsOS: Embedded LinuxSDK For Accessing ICP DAS I/O modulesCross Platform SDK For Microsoft desktop OSX-Windows based Graphical User InterfaceJava SupportedBuilt-in HTTP, FTP, TELNET, SSH and SFTP ServersI/O Expansion slot: 3/7WebBrowerserLinCon-8000Java classesLinCon-8000SDKLinCon-8000Cross-platformSDK & toolsClient PC Linux PC Windows 2000/XPInternet / IntranetDownloadApplicationsWeb basedI/O controlJava codeJVMEmbedded Linux2-9

LinCon-8X4XL-8341-GDual-LAN PACSpecifications & FeaturesThe same hardware specificationsof WinCon-8341/8741Embedded LinuxOptionLinCon-8000L-8741-GOrdering Information:L-8341-G: 3 slot I/O ExpansionL-8741-G: 7 slot I/O Expansion• DM-64T:6.4" LCD Module• DM-121D-AL:12.1" LCD monitor• NS-205: 5-Port Industrial 10/100Base-TX Ethernet Switch• NS-208: 8-Port Industrial 10/100Base-TX Ethernet SwitchNote:Please use NS-205 or NS-208 Industrial EthernetSwitch with Wincon-8x4x series of controllers.Specifications & FeaturesThe same hardware specificationsof WinCon-8341/8741Embedded LinuxBulit-in Matlab runtimeL-8348-GOptionL-8748-GOrdering Information:Matlab PACL-8348-G: 3 slot I/O ExpansionL-8748-G: 7 slot I/O Expansion• DM-64T:6.4" LCD Module• DM-121D-AL:12.1" LCD monitor• NS-205: 5-Port Industrial 10/100Base-TX Ethernet Switch• NS-208: 8-Port Industrial 10/100Base-TX Ethernet SwitchNote:Please use NS-205 or NS-208 Industrial EthernetSwitch with Wincon-8x4x series of controllers.

WinPAC-8000WinPAC-8000NEW!!Programmable Automation ControllerIntroductionWinPAC-8000 is the second generation PAC of ICP DAS. It equips a PXA270CPU (520MHz) running a Windows CE .NET 5.0 operating system, variantconnectivities (VGA, USB, Ethernet, RS-232/485) and 4/8 slots for highperformance parallel I/O modules (high profile I-8K series) and serial-type I/Omodules (high profile I-87K I/O modules).Its operating system,Windows CE.NET, has many advantages, including hardreal-time capability, small core size, fast boot speed, interrupt handling at adeeper level, achievable deterministic control and low cost. Using Windows CE.NET in the WinPAC-8000 gives it the ability to run PC-based Control softwaresuch as Visual Basic .NET, Visual C#, Embedded Visual C++, SCADA software,Soft PLC …etc.Comparing with the first generation WinCon-8000, it not only improves the CPUperformance (from 206 MHz to 520 MHz) and upgrading OS (from CE 4.1 to CE5.0), but also adds many reliability features, such as dual LAN, redundant powerinput, dual battery backup SRAM, etc. It gives you all of the best features of bothtraditional PLCs and Windows capable PCs.2-11

WinPAC-8000 Programmable Automation Controller WinPAC-8000Key Specifications & Features1. PXA270 CPU (520MHz) & 48MB Fash & 128MB SDRAM2. Windows CE .Net 5.03. Built-in VGA Port4. Remote Maintenance via FTP Server and VCEP Software5. Built-In OPC Server (Quicker)6. 64-bit Hardware Serial Number7. Rich Software Solutions (VS.Net 2003, 2005 and eVC)8. Upgrading applications from WinCon to WinPAC Just Copy and Play9. I/O Module Hot Swap Ability10. Rich I/O Expansion Ability (RS-232/485, Ethernet, FRnet, CAN)11. Built-In Flash Disk (14MB)12. Dual Watchdog Timer13. Dual Battery-Backup SRAM (512KB)14. Dual Ethernet Ports15. Redundant Power Inputs16. Ventilated Housing Design Allows Operation Between -25˚C ~ +75˚C2-12

WinPAC-8000WinPAC-8000 NamingNO. of Slot 0/1/4/8WP-8XCommunication3- VGA 1024 x 768 & USB x 24- VGA 800 x 600 & USB x 1Programmable Automation ControllerX X-XXSoftware EN- English1- StandardTC- Traditional Chinese7- ISaGRAFSC- Simplified Chinese9- Indusoft6- ISaGRAF + IndusoftWinPAC-8000ModelWP-8031WP-8131WP-8431WP-8831WP-8037WP-8137WP-8437WP-8837WP-8039WP-8139WP-8439WP-8839WP-8041WP-8141WP-8441WP-8841WP-8047WP-8147WP-8447WP-8847WP-8049WP-8149WP-8449WP-8849SoftwarePre-InstalledNoneNoneNoneNoneISaGRAFISaGRAFISaGRAFISaGRAFIndusoftIndusoftIndusoftIndusoftNoneNoneNoneNoneISaGRAFISaGRAFISaGRAFISaGRAFIndusoftIndusoftIndusoftIndusoftOSCE 5.0CE 5.0CE 5.0CE 5.0CE 5.0CE 5.0CE 5.0CE 5.0CE 5.0CE 5.0CE 5.0CE 5.0CE 5.0CE 5.0CE 5.0CE 5.0CE 5.0CE 5.0CE 5.0CE 5.0CE 5.0CE 5.0CE 5.0CE 5.0: WP-8x3x will be available soon.Selection GuideCPU520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHzFlash SDRAM48MB48MB48MB48MB48MB48MB48MB48MB48MB48MB48MB48MB48MB48MB48MB48MB48MB48MB48MB48MB48MB48MB48MB48MB128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MBVGAResolution1024 x 7681024 x 7681024 x 7681024 x 7681024 x 7681024 x 7681024 x 7681024 x 7681024 x 7681024 x 7681024 x 7681024 x 768800 x 600800 x 600800 x 600800 x 600800 x 600800 x 600800 x 600800 x 600800 x 600800 x 600800 x 600800 x 600USB222222222222111111111111I/Oslot014801480148014801480148

WinPAC-8000WinPAC-8000ModelWP-8036WP-8136WP-8436WP-8836WP-8046WP-8146WP-8446WP-8846SoftwarePre-InstalledISaGRAF +IndusoftISaGRAF +IndusoftISaGRAF +IndusoftISaGRAF +IndusoftISaGRAF +IndusoftISaGRAF +IndusoftISaGRAF +IndusoftISaGRAF +IndusoftSelection GuideOS CPU Flash SDRAMCE 5.0CE 5.0CE 5.0CE 5.0CE 5.0CE 5.0CE 5.0CE 5.0520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHz520 MHzProgrammable Automation Controller48MB48MB48MB48MB48MB48MB48MB48MB128 MB128 MB128 MB128 MB128 MB128 MB128 MB128 MBVGAResolution1024 x 7681024 x 7681024 x 7681024 x 768800 x 600800 x 600800 x 600800 x 600USB22221111I/Oslot01480148: WP-8x3x will be available soon.Software Selection GuideItemISaGRAF-256-EISaGRAF-256-CISaGRAF-256InduSoft-NT1500DInduSoft-CE1500DInduSoft-NT300DInduSoft-CE300DDescriptionISaGRAF Workbench Software, Up to 256 I/O Tags + one ISaGRAF Book-E (English)ISaGRAF Workbench Software, Up to 256 I/O Tags+ one ISaGRAF Book-C (Chinese)ISaGRAF Workbench Software, Up to 256 I/O TagsLocal Interface development version for Windows NT/2000/XP(1500Tag, 3 drivers)Local Interface development version for Windows CE(CE View)(1500 Tags, 3 drivers)Launcht version for Windows NT/2000/XP(300Tag, 3 drivers)Launch version for Windows CE (300 Tags, 3 drivers)2-15

LinPAC-8000Linux PACNEW!!LinPAC-8000LinPAC-8000 SeriesLinPAC-8000 series is the second generation Linux based PAC of ICP DAS.Its leading technology gives you all of the best features of both traditional PLCsand Linux capable PCs. The LinPAC-8000 system is powered by Linux andbrings in the Linux programming style and skill into the world of PC-based PLC.Application developers can develop their own programs directly into C or Javalanguage by using the LinPAC-8000 SDK, and then download them into theLinPAC-8000 for application and use.The Linux OS demands less system resources from the embedded controllerand is therefore the best fit for it because of the embedded controller has somelimitations in system resources. It is for this reason that the LinCon-8000embbeded controller has been published to be a new generation product fromICP DAS and the Embedded-Linux OS has been adopted into the LinPAC-8000.The LinPAC-8000’s main purpose is to allow the numerous enthusiastic linuxusers to control their own embedded systems easily within the LinuxEnvironment.ApplicationsFactory automationIndustrial machine controlMaritime electronicBuilding management systemAircraft engines2-16