EPH 3.600 FN - HANSA-TMP

Electric and HydraulicPulling WinchesHydraulic Winch EPH 3.600 FNHydraulic planetary gear winch with multidisc negative brakeHydraulic wiring diagramRefer to the tipical layout below, to properly matchyour hydraulic system to the winch performance.1 = HYDRAULIC MOTOR2 = OVER-CENTRE VALVE3 = HYDRAULIC PIPE TO NEGATIVE BRAKE4 = CONTROL VALVE5 = HYDRAULIC PUMP6 = FLUID RESERVOIR7 = RELIEF VALVETechnical data:- Minimum pressure for the brake release = 30 bar.- Max. pressure in the return line with stopped winch measured at the control valve exhaust manifold = 5 bar.WARNING :Before operating check theoil level and add if necessary.WARNING :Do not exceed 60 lt / min.If exceeded the hydraulic motormay be damaged.Pag. 32HT 11 / A / 102 / 1205 / E