EPH 3.600 FN - HANSA-TMP
EPH 3.600 FN - HANSA-TMP
EPH 3.600 FN - HANSA-TMP
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Electric and HydraulicPulling WinchesHydraulic Winch <strong>EPH</strong> <strong>3.600</strong> - <strong>EPH</strong> <strong>3.600</strong> <strong>FN</strong>Hydraulic planetary gear winchSPECIFICATIONS- Rated line pull ( 1° layer ) • <strong>3.600</strong> kg- Hydraulic orbit motor- Working pressure with over-centre valve ( optional ) = 160 bar- Automatic safety brake ( oil bath - no needs adjusting ) ( for model <strong>EPH</strong> )- Multidisc negative brake ( for model <strong>EPH</strong> <strong>FN</strong> )- Hardened steel one stage planetary gear train .- Manual clutch shifter ( air-cylinder clutch shifter on request )- Pressure line for clutch shifter air-cylinder ( on request ) = 6 bar- Weight without cable : <strong>EPH</strong> = 39 kg<strong>EPH</strong> / L = 44 kg<strong>EPH</strong> <strong>FN</strong> = 49 kg<strong>EPH</strong> <strong>FN</strong> / L = 50 kg- DANGER:Do not use winch to lift support or otherwise transport personnel.HT 11 / A / 102 / 1205 / E Pag.27
Electric and HydraulicPulling WinchesHydraulic Winch <strong>EPH</strong> <strong>3.600</strong> - <strong>EPH</strong> <strong>3.600</strong> <strong>FN</strong>Hydraulic planetary gear winchTechnical dataPerformance charts at the 1° layerPag. 28HT 11 / A / 102 / 1205 / E
Electric and HydraulicPulling WinchesHydraulic Winch <strong>EPH</strong> <strong>3.600</strong>Hydraulic planetary gear winchDimensionsHT 11 / A / 102 / 1205 / E Pag.29
Electric and HydraulicPulling WinchesHydraulic Winch <strong>EPH</strong> <strong>3.600</strong>Hydraulic planetary gear winchHydraulic wiring diagramRefer to the tipical layout below, to properly matchyour hydraulic system to the winch performance.1 = HYDRAULIC ORBIT MOTOR2 = OVER-CENTRE VALVE ( optional )3 = DIRECTIONAL CONTROL VALVE4 = RELIEF VALVE5 = HYDRAULIC PUMP6 = FLUID RESERVOIR7 = RETURN FLUID FILTER ( 10 microns )8 = SUCTION FLUID FILTERWARNING :Before operating check theoil level and add if necessary.WARNING :Do not exceed 60 lt / min.If exceeded the hydraulic motormay be damaged.Pag. 30HT 11 / A / 102 / 1205 / E
Electric and HydraulicPulling WinchesHydraulic Winch <strong>EPH</strong> <strong>3.600</strong> <strong>FN</strong>Hydraulic planetary gear winch with multidisc negative brakeDimensionsHT 11 / A / 102 / 1205 / E Pag.31
Electric and HydraulicPulling WinchesHydraulic Winch <strong>EPH</strong> <strong>3.600</strong> <strong>FN</strong>Hydraulic planetary gear winch with multidisc negative brakeHydraulic wiring diagramRefer to the tipical layout below, to properly matchyour hydraulic system to the winch performance.1 = HYDRAULIC MOTOR2 = OVER-CENTRE VALVE3 = HYDRAULIC PIPE TO NEGATIVE BRAKE4 = CONTROL VALVE5 = HYDRAULIC PUMP6 = FLUID RESERVOIR7 = RELIEF VALVETechnical data:- Minimum pressure for the brake release = 30 bar.- Max. pressure in the return line with stopped winch measured at the control valve exhaust manifold = 5 bar.WARNING :Before operating check theoil level and add if necessary.WARNING :Do not exceed 60 lt / min.If exceeded the hydraulic motormay be damaged.Pag. 32HT 11 / A / 102 / 1205 / E
Change language