TECHNICAL SPECIFICATION FORCONSULTANCY SERVICES FOR CIVIL,STRUCTURAL & ARCHITECTURAL WORKS FORCHP PACKAGE2X520 MW VIZAG THERMAL POWER PROJECTSPECIFICATION NOIS-1-10-2000/ 005REV. 00SHEET Page 2 of 18CONTENTSPART-II1. Cover sheet Page-1-22. Section-VIII <strong>BHEL</strong> Specification. Page-3-113. Annexure-2 Unprice Format Page-12-184. Section-IX Customer details <strong>specification</strong> 207 pagesNo.Tender/253292/EPC Volume –II, Technical <strong>specification</strong>, Section-A, <strong>civil</strong>, structural andArchitectural.5. Section – X General Condition of Contract (GCC) 40 Pages6. Annexure-3 Price Format Page 1 - 77 Section - XI Interim Report on Geo<strong>technical</strong> 27 PagesInvestigation.
TECHNICAL SPECIFICATION FORCONSULTANCY SERVICES FOR CIVIL,STRUCTURAL & ARCHITECTURAL WORKS FORCHP PACKAGE2X520 MW VIZAG THERMAL POWER PROJECTSPECIFICATION NOIS-1-10-2000/ 005REV. 00SHEET Page 3 of 18SECTION - VIII1.0 DEFINITIONS1.1 OWNERThe following terms and expressions used herein shall have themeanings as indicated below:This has a reference to General Condition of Contract Clause 1.2. TheOwner <strong>for</strong> the Project is – HNPCL, HINDUJA NATIONAL POWERCORPORATION LTD.1.2 PROJECT ENGINEERShall mean the Engineering Officer appointed by <strong>BHEL</strong> to act as“Coordinator” from time to time on behalf of <strong>BHEL</strong> in all matterspertaining to this work. He or his nominee(s) shall further direct,supervise, inspect, check, scrutinize, measure, approve and certify <strong>for</strong>payments some or all the scope of work and be in charge of work definedhere-in-below.2.0 CIVIL AND STRUCTURAL WORKS2.1 GENERALThe scope of work, <strong>for</strong> this area covers Design, Engineering, Preparationof Documentation, Obtaining Approval of <strong>BHEL</strong> / Owner / Customer’sConsultant, Procurement Assistance, Site Assistance etc. <strong>for</strong> thefollowing:The Scope of Work shall include but shall not be limited to Preparation ofSchemes and Conceptual Designs according to the requirements, DetailedCivil, Structural, Architectural Design and Analysis on the basis of loadingparameters, preparation of analysis / design document and preparation ofConstruction Drawings, including various activities at Contract Stage. Theactivities involved shall include furnishing phase-wise requirements ofStructural Steel, Rein<strong>for</strong>cing Steel and Cement <strong>for</strong> procurementpurposes; detailed Design and Engineering required <strong>for</strong> the PermanentWorks; Preparation of As-Built drawings, Checking of fabrication drawingsand connection design, checking of design and drawings of <strong>BHEL</strong> vendors,providing Design Clarifications during Construction Stage as and whenrequired at Site; and any other activity required <strong>for</strong> the Contract Stage.The following <strong>services</strong> are envisaged in the scope of the Sub-Consultant:I. The scope of this work includes complete Architectural, Civil andStructural Design and Drawings Services <strong>for</strong> Civil & structural Worksas per ‘CIVIL-Annexure -2 in Clause 5.0. The list is only indicative. It is