BEKAMAX-F - PG 1&4 (Page 1)

BEKAMAX-FHIGH WATTAGE FLOODLIGHTBEKAMAX-F / Stirrup MountedMAX-FBEKAMAX-F / BE

BEKAMAX-FHIGH WATTAGE FLOODLIGHTBEKAMAX-F/Stirrup MountedBEKAMAX-F/BEDESIGNED FOR SPORTSFIELD, SECURITY, HIGHMAST, TOLL PLAZA,INDUSTRIAL AND GENERAL FLOODLIGHTING WHERE PRECISE TOTAL CUT-OFFCHARACTERISTICS ARE REQUIREDAPPLICATIONS■ AREA LIGHTING■ SMALL SPORTSFIELD LIGHTING■ ROAD INTERCHANGES■ PERIMETER LIGHTING■ SECURITY LIGHTING■ TOLL PLAZAS■ DOCKS■ AIRPORT APRONSFEATURES■ LAMP COMPARTMENT - IP65■ GEAR COMPARTMENT - IP65■ DIE CAST ALUMINIUMHOUSING■ REMOVABLE CONTROL GEAR■ NO LIGHT POLLUTIONCONSTRUCTION DETAILSThe luminaire consists of a onepiecedie cast aluminium housingfor the lamp and control gear.It is designed to operate tubular150/250/400W high pressuresodium lamps and 250/400Wmetal halide lamps.SABS MARKSThe luminaire bears the SANS 475mark and the SANS60598-2-5 safety mark.INGRESS PROTECTIONThe luminaire has a degree ofprotection that complies with SANS60598-2-5:Lamp Compartment: IP65Gear Compartment: IP65The IP rating is certified by a SABStest report.LUMINAIRE HOUSING• The housing is robustlyconstructed, weatherproof, hailproof, corrosion proof and vandalresistant.• It is manufactured from corrosionresistant die cast aluminium.• The front glass covering the lampcompartment is heat and impactresistant, held to the lamphousing by four stainless steelclamps and sealed by anextruded heat resistant silicongasket.REFLECTOR SYSTEM• Reflectors are manufactured from99.98% super pure deepanodized aluminium and are notsubject to accidental misalignment.• Precision-designed reflectortechnology projects the luminousflux at a peak angle of 67˚.LAMP HOLDER HOUSING• Lamp replacement is facilitatedfrom the side on the exterior ofthe floodlight housing by a highpressure die cast aluminium lampholder housing.GEAR COMPARTMENT• The control gear compartment isseparated for thermal reasonsfrom the lamp compartment.• Access to the gear compartmentis gained by removing a separatedie cast aluminium cover which isheld by four captive stainless steelscrews.• The control gear is mounted on aremovable gear tray and issuitable for operation with thespecified rating of the lamp on a230V +3%/-10% 50Hz singlephase system.• All screws, bolts and metal partsare stainless steel or anti-corrosiontreated material.• Ignitors, where applicable, are ofthe superposed pulse type.• The luminaire is power factorcorrected to a minimum of 0,9.MOUNTING• The floodlight can either bemounted with a stirrup or bymeans of a bottom entry pole capsuitable for a 76mm diameterspigot.• The stirrup is manufactured from5 x 50mm hot dipped galvanizedsteel.• The pole cap is manufacturedfrom die cast aluminium and isbolted to the housing.FASTENERS• Inserted helicoils for the lampholder housing and the gearcompartment prevent thecorrosion of stainless steel screwsto the aluminium housing.

VERSIONS/DIMENSIONS IN MMSTIRRUP VERSIONOPTION: POLE CLAMP ASSEMBLY (/PC)650485185650175175425415ø130 toø156 Pole415M10 boltsand nutsOPTION: BOTTOM ENTRY MOUNTING (/BE)Windage area: 0.085m 2PHOTOMETRIC DATAINTENSITY DISTRIBUTIONMedium BeamBEKAMAX-F 400W HPS-T800500Wide BeamBEKAMAX-F 400W HPS-TMAX-FLuminous Intensity, cd/klm6004002000LEFTBOTTOMTOPRIGHTLuminous Intensity, cd/klm4003002001000LEFTBOTTOMRIGHTTOPANTI-LIGHT-POLLUTION LUMINAIRE180 135 90 45 0 45 90 135 180Angle, degrees90.0 67.5 45.0 22.5 0.0 22.5 45.0 67.5 90.0Angle, degreesHORIZONTAL ILLUMINANCEBEKAISOLUXBEKAMAX-F 400 HPS-TBEKAMAX-F 250 HPS-TE (lx) x 1.0E (lx) x 0.56BEKAISOLUXH(m)BEKAMAX-F 400 MH-T E (lx) x 0.67BEKAMAX-F 250 MH-T E (lx) x 0.42H(m)6.0 7.0 8.06.0 7.0 8.0E (lx) -1H E (lx)BEKAMAX-F 400 HPS-T E (lx) x 1.0BEKAMAX-F 250 HPS-T E (lx) x 0.56BEKAMAX-F 400 MH-T E (lx) x 0.67BEKAMAX-F 250 MH-T E (lx) x 0.42-1HELECTRONIC DATA FILES CAN BEDOWNLOADED FROMwww.beka.co.za01H2H50 37 2850 37 2830 22.2 16.830 22.2 16.820 14.8 11.23H20 14.8 11.210 7.4 5.610 7.4 5.65 3.7 2.85 3.7 2.84H1 0.74 0.561 0.74 0.565H0 1H 2H 3H 4H 5H0 1H 2H 3H 4H 5H01H2H3H4H5H

BEKAMAX-FHIGH WATTAGE FLOODLIGHTORDERING DATAMEDIUM BEAMWIDE BEAMDESCRIPTION LAMP LAMP HOLDER LUMEN MASS (KG)BEKAMAX-F 150W HPS-T ✔ ✔ HST 150W E40 15000 14.7BEKAMAX-F 250W HPS-T ✔ ✔ HST 250W E40 28000 16.7BEKAMAX-F 400W HPS-T ✔ ✔ HST 400W E40 48000 17.2BEKAMAX-F 600W HPS-T ✔ ✔ HST 600W E40 90000 21BEKAMAX-F 250W MH-T ✔ ✔ HIT 250W E40 20000 16.7BEKAMAX-F 400W MH-T ✔ ✔ HIT 400W E40 35000 17.2Standard colour: Natural Aluminium, Grey (RAL 7045)OPTIONS & ACCESSORIESMAX-FSUFFIXDESCRIPTION/ AL AUTOLIGHT ASSEMBLY COMPLETE WITH LAMP/ AV ANTI-VIBRATION BRACKET/ BE BOTTOM ENTRY/ MB MEDIUM BEAM/ PC POLE CLAMP ASSEMBLY/ PCU POWER CHANGE-OVER UNIT/ PV PAINTED VERSION, GREY/ SSS STAINLESS STEEL STIRRUP/ WB WIDE BEAMDESIGNED AND MANUFACTURED BYBEKA (PTY) LTD - SOUTH AFRICAMANUFACTURERS OF LUMINAIRES AND GLASS FIBRE POLES03/11BEKA (PTY) LTD, 13 West View Road • P.O. Box 120, Olifantsfontein 1665, South AfricaTel: +27 (0)11 238-0000 • Fax: +27 (0)11 238-0180e-mail: info@beka.co.za • website: www.beka.co.za