RAYPAK REPLACEMENT INSTRUCTIONS - Pool Supply Unlimited

More documents

Recommendations

Info

ACCESSING THE CONTROL BOARDPage 2P/N 241416 Rev 1Effective: 10-01-10Replaces: NEW1. Turn off the power to the heater.2. Turn off the gas to the heater.3. B-Series: Remove front door by removingthe 4 door panel screws shown in Fig. 1 andFig. 2.4. A-Series: Remove front door by removingthe large door screw in front of unit asshown in Fig. 1.5. Remove the four screws on the side of controlpanel. See Fig. 3 and Fig. 4.6. Lay control panel forward toward you to accessthe back of the temperature controlboard.REMOVE THESESCREWS FOR B - SeriesLARGEDOORSCREWFig. 2Close-upFig. 1For A-SeriesREMOVE THESE SCREWSFig. 3Fig. 4
Page 3P/N 241416 Rev 1Effective: 10-01-10Replaces: NEWREMOVING THE CIRCUIT BOARDMake sure the power and gas are off.1. Unplug all connectors from old circuit board. SeeFig. 5.2. Unplug keypad ribbon from old circuit board.3. Remove screws as shown in Fig. 6.4. Remove old circuit board.UNPLUGALL CONNECTORSFig. 5REMOVE KEYBOARDRIBBONREMOVE MOUNTING SCREWSFig. 6
Page 1: Page 1P/N 241416 Rev 1Effective: 10
Page 5 and 6: Page 5P/N 241416 Rev 1Effective: 10

RAYPAK REPLACEMENT INSTRUCTIONS - Pool Supply Unlimited

Create successful ePaper yourself

Delete template?

Save as template?