RAYPAK REPLACEMENT INSTRUCTIONS - Pool Supply Unlimited

More documents

Recommendations

Info

Page 6P/N 241416 Rev 1Effective: 10-01-10Replaces: NEWLow NOx MODELS 207A, 267A, 337A & 407A ONLY:PREPARE NEW <strong>REPLACEMENT</strong> CONTROL PCB FOR INSTALLATION1. Locate Low Nox tab and P-10 air switch terminal on the board asshown in Fig. 12 and Fig. 13.2. Use pliers to break off the tab shown in Fig. 14.3. Attach the wire from the air switch to the P-10 location shown in Fig. 15.Low NOxTABP-10TERMINALBREAKTABWIRE AIRSWITCHTO P-10HEREFig. 12Fig. 13BROKEN TABP–10 TERMINALFig. 14Fig. 15
Page 7P/N 241416 Rev 1Effective: 10-01-10Replaces: NEWGASKET & NEW CIRCUIT BOARD NEW BEZEL INSTALLATIONNote: Disregard window gasket installation if already present.1. Remove backing on gasket and install adhesive side on the controlpanel bezel as shown in Fig. 16 & Fig. 17.2. Re-assemble with new board to plastic bezel using the three mountingscrews as shown in Fig. 18.REMOVE BACKINGGASKETADHESIVE SIDE TOPLASTIC BEZELFig. 16CLEARWINDOWLAY BEZELDOWNRE-ASSEMBLE WITH NEW BOARDMOUNTING SCREWSFig. 17Fig. 18
Page 1 and 2: Page 1P/N 241416 Rev 1Effective: 10
Page 5: Page 5P/N 241416 Rev 1Effective: 10

RAYPAK REPLACEMENT INSTRUCTIONS - Pool Supply Unlimited

Create successful ePaper yourself

Delete template?

Save as template?