BURMASTIC ADHESIVE SF - 5 GAL

Material Safety Data SheetBURMASTIC ADHESIVE SF - 5 GALVersion 5.0 Print Date 07/09/2012REVISION DATE: 07/08/2012SECTION 8 - EXPOSURE CONTROLS / PERSONAL PROTECTIONPersonal protection equipmentRespiratory protection : Wear appropriate, properly fitted NIOSH/MSHA approved organic vapor orsupplied air respirator when airborne contaminant level(s) are expected toexceed exposure limits indicated on the MSDS. Follow manufacturer'sdirections for respirator use.Hand protection : Use suitable impervious nitrile or neoprene gloves and protective apparel toreduce exposure.Eye protection : Wear appropriate eye protection.Use safety glasses if eye contact is likely.Skin and body protection : Use disposable or impervious clothing if work clothing contamination is likely.Remove and wash contaminated clothing before reuse.Protective measures : Use professional judgment in the selection, care, and use.Engineering measures : Use general ventilation and/ or local exhaust to reduce the airbornecontaminant concentration below the exposure limit listed in the MSDSExposure LimitsChemical Name CAS Number Regulation Limit FormAsphalt 8052-42-4 ACGIH TWA: 0.5 mg/m3 Inhalable fraction.asbenzene solubles4,4'-Methylenebis(phenylisocyanate)101-68-8 ACGIH TWA: 0.005 ppmSECTION 9 - PHYSICAL AND CHEMICAL PROPERTIESForm: LiquidColor: BlackOdor: PetroleumpH: Not available.Vapour pressure: Not available.Vapor density: Heavier than airMelting point/range: Not available.Freezing point: Not available.Boiling point/range: Not available.Water solubility: InsolubleSpecific Gravity : 1.066% Volatile Weight : 1 %SECTION 10 - REACTIVITY / STABILITYSubstances to avoid: Amines.Water or moisture and oxidizing agents.Alcohols.Strongacids.Strong bases.3/6 365600 805