Samsung DMS500TRW Product Manual - Comparison.com.au

troubleshootingCheck these points if your dishwasher…PROBLEM POSSIBLE CAUSE SOLUTIONWill not start.Has a bad odor.Has water remainingafter the program hasfinished.Has food particlesremaining on dishes.The door is not closed completely.The Start/Reset button is notselected.No program is selected.The power cord is not connected.The water supply does not work.There is water left over from the lastcycle.The drain hose is folded or clogged.An inappropriate program has beenselected.The filter is contaminated.No dishwashing detergent is beingused.The pressure of the supplied wateris low.One of the nozzles is clogged.The dishes are improperly loaded.Check that the door is latched andclosed completely.Press the Start/Reset button afterclosing the door.Select a program.Connect the power cord.Check that the water supply valve isopen.Insert detergent without loadingdishes, and run the Normal cycle toclean the dishwasher.Straighten the hose.Select a program according to thenumber and soil level of the dishes,as directed in this manual.Clean the filter.Use a automatic dishwasherdetergent.The proper pressure of the suppliedwater should be 0.05 ~ 0.8 Mpa.Clean the nozzle.Rearrange the dishes so they do notinterfere with the spray arm and thedispenser operation.Does not dry dishes well. There is no rinse aid in the dispenser. Check the dispenser and add rinseaid.30_ troubleshooting