Structural Bonding

DISPENSING
Two-Part Volumetric
Dispensing
Dual Cartridge Systems
140
Two-Part Volumetric Dispensing
Loctite® Posi-Link Dispense System
for Dual Cartridges
When you need high precision dispensing from your prepackaged dual cartridge
adhesive, the Loctite® Posi-Link Dispense System is the solution. This system offers
dispensing accuracy well beyond any pneumatic cartridge dispenser down to 0.001 ml
drop size. This system specifically excels at eliminating dispense variability due to
continuously changing viscosity (curing) in the mix nozzle. It can be integrated easily
into any automated process and provide process feedback to a plant PLC. Select your
system based on cartridge size and adhesive ratio requirements. You can choose
50, 200 or 400 ml packages for any 1:1, 2:1 or 10:1 ratio product.
LOCTITE ® POSI-LINK CONTROLLER Item Number: 98377
Provides all operator interface and control signals to actuator.
Features:
COMPLETE LOCTITE ® POSI-LINK DUAL CARTRIDGE SYSTEM
For 50 ml Dual Cartridges:
Controller + Actuator + Nest
For 200/400 ml Dual Cartridges:
Controller + Actuator + Nest + Pinch Tube
• Dose selection by volume
• Easy programming controller, with storage
capacity for 25 user- defined programs, reduces
adhesive setup waste
• Smallest footprint on the market to conserve benchtop space
• Automatic cartridge engagement to ensure easy and
error-free cartridge changeover
• Adhesive level monitoring with low level visual and digital outputs
• Fault detection with visual and digital outputs for clogged nozzles,
loss of pressure, and system faults
• In- cycle visual and digital outputs
• Foot switch, finger switch or PLC remote start activation
LOCTITE ® POSI-LINK ACTUATORS Item Numbers: See chart
Provides adhesive dispensing by effecting incremental movements of dual pistons and displacing programmable
qualities of adhesive within the cartridge regardless of viscosity changes in the mix nozzle.
PRODUCT Item Number Dual Cartridge Size
Loctite ® Posi-Link 10-50 Actuator 98379* 50 ml
Loctite ® Posi-Link 200-400 Actuator 98380 200, 400 ml
(Each Item Sold Separately)
Features:
• Flexible orientation in any position
• Easily fits below an industrial workbench or wall mounts with brackets
supplied to conserve benchtop space
• Lightweight remote dispense head has a “positive link” to actuator via a 7-foot tether,
allowing ergonomic handheld dispensing or mounting directly on robotic arms
• Easily attaches to the dual cartridge nests (sold separately) to accommodate alternate cartridge barrel sizes
• Mechanically linked dual plungers guarantee that proper ratios are achieved
• Positive shutoff pinch tube available, which directly attaches to the mix nozzle to eliminate dripping
the
AGE
of Volumetric Control
The END of wetted
components