Structural Bonding

LOCTITE ® POSI-LINK 50 ML
DUAL CARTRIDGE NESTS
Item Number: See chart
Connects the actuator
to the dual cartridge.
Dual Cartridge Nest Features:
• No tool cartridge changeover
• No contact with adhesive; disposable syringes
are the only component in contact with the adhesive
Loctite ® Posi-Link Dual Cartridge Nest Selection
1:1 / 2:1 – 50 ml Cartridge 10:1 – 50 ml Cartridge 1:1 / 2:1 – 200 ml Cartridge 1:1 / 2:1 – 400 ml Cartridge 10:1 – 400 ml Cartridge USED WITH
98641 98642 N/A N/A N/A
N/A N/A 98662 98663 98664
Theory of Operation
Loctite ® Posi-Link 10-50 System, Integrated Robotic Solution using
a 50 ml dual cartridge, and showing wall-mounted actuator.
For additional information and the full line of equipment, visit www.equipment.loctite.com.
Loctite ® Posi-Link
10-50 Actuator
Loctite ® Posi-Link
200-400 Actuator
A disposable dual cartridge is effectively used as a dual metering piston/cylinder. Because the individual chambers of a dual
cartridge are of a known and constant diameter, a given incremental measurement of the dual pistons will displace a known
volume of adhesive within each chamber at an exact ratio. This dual cartridge system functions identically to a Loctite® Posi-Link
Syringe System, except that it has two plungers within the dispense head. These plungers simultaneously act on two chambers
within the dual cartridge.
LOCTITE ® PINCH TUBE VALVE Item Number: 97141
Features:
• Valve attaches directly to
the end of the square
mix nozzle
• Provides positive no-drip
shutoff, using disposable
pinch tube elements
FOR 50 ML DUAL CARTRIDGES:
OPTIONAL: 97141 – Valve +
97541 – 10 pack Replacement Tube Inserts + 98671 – Solenoid Valve
FOR 200/400 ML DUAL CARTRIDGES:
REQUIRED: 97141 – Valve +
97541 – 10 pack Replacement Tube Inserts
(98671 – Solenoid Valve included with actuator)
LOCTITE ® POSI-LINK 200/400 ML
DUAL CARTRIDGE NESTS
Item Number: See chart
Connects the actuator
to the dual cartridge.
PRODUCT
TECHNICAL SPECIFICATIONS
Loctite ® Posi-Link
Controller
Loctite ® Posi-Link
10-50 Actuator
Loctite ® Posi-Link
200-400 Actuator
Item Number 98377 98379 98380
Power
Source
9' communication
cable
100/240 VAC;
47/60 Hz
100/240 VAC;
47/60 Hz
Dimensions 5.375" H x 6" D x 6" W 34" H x 4" D x 5" W 34" H x 4" D x 5" W
Total Weight
Dispense Head
2 lbs. 13 lbs. 20 lbs.
Weight
(Includes Nest and
Pinch Tube Valve)
N/A 2.0 lbs. 10.0 lbs.
Air Supply
Posi-Link
N/A 40 to 100 psi 40 to 100 psi
Electro /
Hydraulic Tether
N/A 7 feet 7 feet
Minimum
Dispense Volume
N/A 0.001 ml 0.01 ml
Maximum
Dispense Rate
Maximum
Cycle Rate
Used to
Dispense
N/A 0.4 ml / second 1.0 ml / second
N/A 1 cycle per second 1 cycle per second
N/A
Parts Included (1) Loctite ®
Posi-Link Controller
(1) Foot Switch
Additional
Information
All dual 50 ml cartridge
1:1 / 2:1 / 10:1
ratio adhesives
All dual 200 or 400 ml
cartridge 1:1 / 2:1 / 10:1
ratio adhesives
(1) Loctite ® Posi-Link Actuator
(1) 9' Controller / Actuator Signal Cord
(1) 110 Power Cord
(1) Air Inlet Pressure Regulator Gauge
(1) Wall or Table Mounting Bracket
(1) Instruction Manual
For Spare Parts and Accessories, visit www.equipment.loctite.com.
141
DISPENSING
Two-Part Volumetric
Dispensing
Dual Cartridge Systems