Structural Bonding

SEALANTS / DRESSINGS FOR
EXISTING GASKETS
LOCTITE ® QUICKSTIX 534
HI-TACK GASKET DRESSING
DISPENSING OPTIONS
NEW
No mess, semisolid formula offers
added control and ease of use.
Patented package is portable and
won’t leak or spill. Seals and holds
the heaviest gaskets during
assembly. Solvent-free and low
odor. Suitable to 300°F (149°C).
LOCTITE ® GASKET SEALANT 1
Reliable, paste-like gasket sealant,
dressing, and coating. Sets quickly to
a hard set and is recommended for
rigid, permanent assemblies.
Use to 400°F. Resistant to gasoline
and other solvents.SEALANT
DRESSINGS FOR EXISTING
LOCTITE ® GASKET SEALANT 2
Reliable, paste-like gasket sealant,
dressing, and coating. Sets slowly to
a pliable film. Best suited for nonrigid,
vibrating assemblies. Use to
400°F. Resistant to gasoline and
other solvents.S
Loctite ® Pump-A-Bead II is an all-pneumatic dispense
system for pumping Loctite® anaerobic gasketing
materials from 850 ml cartridges.
A pneumatically driven,
reciprocating positive displacement
piston pump provides for consistent
dispensing and ensures that air is not
introduced into the product. This system
is well-suited for stationary or bead dispensing.
For available spare parts, valves and accessories,
please visit www.equipment.loctite.com.
Item Number: 986000
Dimensions: 16.2" H x 36" W x 10" D
SEALANT DRESSINGS FOR
EXISTING GASKETS
LOCTITE ® HIGH TEMPERATURE
GASKET MAKER
Slow-setting, non-hardening,
high temperature sealant.
Recommended for heavy-duty
applications. Temperature range
is -50°F to 600°F (-45°C to 315°C)
intermittent. Resists common
shop fluids.
LOCTITE ® HI-TACK GASKET SEALANT
Red-colored, liquid sealant that
holds gaskets in place during
assembly. Seals and bonds rubber,
cork, paper, felt, metal, and
asbestos gaskets. Sets quickly
to a very tacky film. Suitable to
500°F (260°C). Contains no
ozone- depleting compounds.S
SEALANT DRESSINGS FOR
EXISTING GASKETS
LOCTITE ® AVIATION GASKET SEALANT
Reliable, liquid gasket sealant,
dressing, and coating. Thin
brushable dressing or sealant for
close-fitting parts. Use to 400°F.
Resistant to gasoline and
other solvents.
LOCTITE ® COPPER GASKET ADHESIVE
Fast drying, metallic, copper sealant
helps dissipate heat, prevent gasket
burnout, and improve heat transfer.
Fills hot spots and surface
imperfections. Temperature range
is -50°F to 500°F (-45°C to 260°C).
Resists shop fluids.
Loctite ® 300 ml Pneumatic Cartridge Dispenser
is a manually controlled, pneumatically operated unit
for dispensing Loctite® Elastomeric Adhesives & Sealants
packaged in 300 ml cartridges. The operator controls the
amount and rate of application using the dispense
pressure, orifice size, and manual trigger.
For available valves, spare parts, accessories
and dispense tips, please visit
www.equipment.loctite.com.
Item Number: 97002
Dimensions: 8" H x 13.5" L x 1.5" D
Weight: 18 lbs. (800 g)
55
GASKETING &
SEALING
Anaerobics