Structural Bonding

GENERAL PURPOSE EPOXIES
LOCTITE ® FIXMASTER ® POXY PAK
This fast cure, general purpose
epoxy bonds virtually any material.
It will also fill or seal cracks and
rebuild worn surfaces. Comes in
a 1 oz. syringe with a built-in
plunger for easy dispensing
without equipment. Working
time is approximately 4 minutes.
LOCTITE ® FIXMASTER ® 4-MINUTE EPOXY
Cartridge-based, general purpose,
two-part epoxy. Ideal for emergency
repairs or where fast cure time is
required. Sets in 5 minutes. Requires
handheld dispenser (P/N 98472) and
mix nozzle (P/N 98455).
LOCTITE ® FIXMASTER ® GENERAL PURPOSE
EPOXY (MIXER CUPS)
Premeasured epoxy mixer cups. Onehour
working time. Fills porosity
and cracks. Ideally suited for
applications that only require a
small amount of epoxy. Adheres to
metal, glass, wood, and hard
plastics. Sets in 60 minutes.
LOCTITE ® FIXMASTER ®
FAST CURE EPOXY (MIXER CUPS)
Faster setting version of Loctite®
Fixmaster® General Purpose Epoxy.
Sets in 5 to 15 minutes.
HIGH PERFORMANCE
LOCTITE ® FIXMASTER ®
HIGH PERFORMANCE EPOXY
Fiberglass-reinforced epoxy offering
exceptional shock resistance and
outstanding tensile strength. Ideal
for making tough permanent bonds
on metals, wood, glass, and hard
plastics. Comes in a 50 ml cartridge,
1 oz. syringe and a 2 gallon container.
The cartridge requires the handheld
dispenser (P/N 98472). Cartridge
comes bundled with one mix nozzle.
Sets in 30 minutes.
LOCTITE ® FIXMASTER ®
FAST SET STEEL EPOXY
Cartridge-based, steel-filled epoxy.
Makes fast, cost-effective repairs.
Easy-to-use and easy-to-apply. Ideal
for metal parts that must be back in
service quickly. Can be machined
when cured. Requires the handheld
dispenser (P/N 98472). One mix
nozzle comes included with the
cartridge. Sets in 3 minutes.
LOCTITE ® FIXMASTER ®
WEAR RESISTANT PUTTY
Ceramic fibers give this trowelable
putty excellent wear and abrasion
resistant properties. Cures to a
smooth, low friction surface. For
surfaces exposed to wear, erosion,
and cavitation.
Loctite® Fixmaster® Superior Metal 6-Step Process
SPECIALTY PRODUCTS
LOCTITE ® FIXMASTER ®
WET SURFACE REPAIR PUTTY
Use this unique, trowelable epoxy
to repair and rebuild wet, even
underwater surfaces. Bonds to most
metals, concrete, and some plastics.
LOCTITE ® FIXMASTER ®
2000° PUTTY
Single-component putty designed
to fill and restore damaged metal
and fill cracks in environments that
will see 2000°F. Water-based and
non-toxic. Typical applications
include header, manifold and
cast iron repair.
� The working time of an epoxy is the
time required for the viscosity to
double. Once the viscosity has
doubled, epoxies are generally very
hard to work with so jobs should be
completed before this time.
� Increasing the temperature of the
product or substrate can increase
the cure speed of an epoxy.
STEP 1: Clean completely. STEP 2: Gather product. STEP 3: Prepare product. STEP 4: Mix completely. STEP 5: Apply. STEP 6: Set.
91
REPAIRING,
REBUILDING &
RESTORING
Maintenance &
Repair Epoxies