INSTRUCTION, MANUAL HOLDER KIT - Maxon
INSTRUCTION, MANUAL HOLDER KIT - Maxon
INSTRUCTION, MANUAL HOLDER KIT - Maxon
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
LIFT CORPORATION Sht. 1 of 5 DSG# M-12-23 Rev. - Date: 11/28/12<strong>INSTRUCTION</strong>, <strong>MANUAL</strong> <strong>HOLDER</strong> <strong>KIT</strong>FIELD <strong>KIT</strong> P/N 286328-01FENDER WASHER, ¼”P/N 903409-01QTY. 8BUTTON HEAD SCREW, ¼”-20 x 5/8” LGP/N 900719-04QTY. 3LOCK WASHER(ALTERNATE VEHICLE INSTALLATION)P/N 903426-08QTY. 3RIVET(ALTERNATE VEHICLE INSTALLATION)P/N 903719-04QTY. 3LOCK NUT, ¼”-20P/N 905264-05QTY. 3WOOD SCREW(ALTERNATE VEHICLE INSTALLATION)P/N 903009-01QTY. 3<strong>MANUAL</strong> <strong>HOLDER</strong>P/N 906909-01QTY. 1
!LIFT CORPORATION Sht. 3 of 5 DSG# M-12-23 Rev. - Date: 11/28/12CAUTIONTo prevent injuries and equipment damage,prior to beginning this installation, park truckon level ground and set emergency brake.1. Measure and mark 2 holes oncover as shown in FIG. 3-1.0.26 DIA. (2 PLACES)10.50”3.50”4.75”MEASUREMENT FOR HOLESFIG. 3-12. Open cover (FIG. 3.2). Drill 2holes at the marks.COVER OPENEDFIG. 3-2
Change language