W163 Front Camber & Caster Adjustment.pdf

3 Check camber and assign tabular value AR40.20-P-0322-02GHCamber at vehicle level*BE40.20-P-1001-13DCamber at vehicle level*BE40.20-P-1002-13DNote maximum permissible difference in frontaxle*BE40.20-P-1003-13Dcamber between the right and left-handsides of the vehicle4 Check caster and assign tabular value i Measurement with wheels turned 20°. AR40.20-P-0322-03GHAdjust5 Adjusting camber and caster i The front axle camber is corrected at therear bolted connection of the uppertransverse control arm on the vehicle frame.i The front axle caster is adjusted at thefront bolted connection of the uppertransverse control arm on the vehicle frame.n6 Re-check vehicle level at front axle afteradjusting the camber and caster7 Check toe-in at front and rear axle and adjustif necessary.i The vehicle level must match thedimension established during the initialmeasurement.See #Perform chassis alignment checkAR40.20-P-0322-06GH*BA33.20-P-1006-01DAR40.20-P-0301GHAR40.20-P-0200AInspection data of front wheel camberNumber Designation Models163.113/128/136/154/157/172/175Type163.174BE40.20-P-1001-13D Camber at vehicle level 3.0 ° (° - - 0° 24' (F20')3,2° (° - - 0° 24' (F20')3,4° (° - - 0° 25' (F20')3,6° (° - - 0° 26' (F20')3,8° (° - - 0° 26' (F20')4,0° (° - - 0° 27' (F20')4,2° (° - - 0° 28' (F20')4.4° (° - - 0° 29' (F20')4,6° (° - - 0° 29' (F20')4,8° (° - - 0° 30' (F20')5,0° (° - - 0° 31' (F20')BE40.20-P-1002-13D Camber at vehicle level 5,4° (° - 0° 33' (F20') -5.6° (° - 0° 34' (F20') -5.8 ° (° - 0° 35' (F20') -6,0° (° - 0° 36' (F20') -6,2° (° - 0° 37' (F20') -6,4° (° - 0° 38' (F20') -6,6° (° - 0° 39' (F20') -6,8° (° - 0° 40' (F20') -7,0° (° - 0° 41' (F20') -7,2° (° - 0° 42' (F20') -BE40.20-P-1003-13DNote maximum permissible difference infront-axle camber between the right and lefthandsides of the vehicle(° 20' 20'n Wheel location, hubNumber Designation Model 163BA33.20-P-1006-01D Bolt, upper wishbone to frame Nm 120Copyright DaimlerChrysler AG 21.08.2006 CD-Ausgabe G/01/06 . This WIS print-out will not be recorded by Modification services. Page 2

Copyright DaimlerChrysler AG 21.08.2006 CD-Ausgabe G/01/06 . This WIS print-out will not be recorded by Modification services. Page 3