PMT50Ex-V2_0-00- Prospekt - Martens Elektronik GmbH

5.6Alarm output 1 OFFLimitFunctionOFFFunction alarm output A1OFFLimit Monitoring of the measuring valueFault det. Break of wire or short-circuitSelection with buttons and .Limit/Fault det.5.6.1Alarm output 1 MINMAXSwitching functionFaultdet.Switching function alarm output A1MIN, MAXSelection with buttons and .Limit5.6.1.1Setpoint2.0mMAXSetpoint alarm output A1Setting possible from -9999 ... 9999 digitwith buttons and .Alarm output 15.6.1.2Switching hysteresis0.1mHysteresis alarm output A1Setting possible from 1 ... 9999 digitwith buttons and .Alarm output 15.6.1.3Switch-on delay time0:00:00h : mm : ssAlarm output 1Switch-on delay time alarm output A1Setting possible from0:00:00 ... 9:00:00 (h:mm:ss)with buttons and .5.6.1.4Switch-off delay time0:00:00h : mm : ssAlarm output 1Switch-off delay time alarm output A1Setting possible from0:00:00 ... 9:00:00 (h:mm:ss)with buttons and .Note: The parameter settings for A2 have to beconfigured in the same way.5.7SimulationOutput signal15.0mSimulation of the input signalDer PMT50Ex works as actuator. The analog output changes in theprogrammed range.Setting posssible with buttons and .This parameter will not be excited automatically after 120 seconds.Continue page 14- 13 -