Push Button R55F Series Fiber-Optic Color Mark Sensors - Multiprox

R55F Series Glass and Plastic Fiber-Optic Color Mark SensorsEuro-Style Field-Wireable ConnectorsContacts: Gold-plated; 4-pin models rated 250V ac/dc max., 4 A max.; 5-pin models rated 50V ac/dc max., 4A max.Cable Diameter: 4.0 to 5.0 mm (0.16 to 0.20")Temperature: -25° to +90°C (-13° to +194°F)Environmental Rating: NEMA 6P, IP 67StyleModelGenderDimensionsPin-outFIC-M12M5Male15.0 mm(0.59")60 mm(2.4")10 mm(0.4")M12 x 120 mm(0.8")5-PinStraightFIC-M12F5Female15.0 mm(0.59")60 mm(2.4")10 mm(0.4")M12 x 120 mm(0.8")FIC-M12M5AMale41 mm(1.6")20 mm(0.8")5-PinRight-angle30.5 mm(1.20")M12 x 120 mm(0.8")FIC-M12F5AFemale15.0 mm(0.59")!WARNING . . . Not To Be Used for Personnel ProtectionNever use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death.These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safetyapplications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your currentBanner Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel protection.WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair orreplace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warrantyperiod. This warranty does not cover damage or liability for the improper application of Banner products. This warranty is in lieu of anyother warranty either expressed or implied.Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 • Phone: 763.544.3164 • www.bannerengineering.com • Email: sensors@bannerengineering.com